Tubes of Repair PVC Glue for Inflatable Boat

Really great deal for you get. Tons of patches and glue. Works great.

Used on the bottom of my dingy, it's still there 6 months later, baking in the sun, no leaks. I'd use again.

Have used this to repair 3 holes. Seems to hold well and stop the leaks. There were no application instructions but I just followed some others online and it seemed to work well.

I accidentally stabbed a hole into my inflatable paddle board when adjusting my fins ( silly mistake I know) but this patched it right up! I followed the directions carefully ( I’ve seen people say this doesn’t work, follow the directions and it will) and it patched it perfectly. Within the next few days I took my paddle board out and I had a very successful and enjoyable 4 hour trip on the water; the patch continued and continues to hold up. I will say I put some gorilla waterproof sealing tape over the patch as an extra precaution but I think I would be okay without it. Definitely recommend this if you need to seal some type of inflatable.

This item is OK. Nice orange container. A few different PVC patches and 2 tubes of MEK glue with instructions. Kind of pricey for what it is.

Workers like a charm. Had a small hole in our kayak, super easy to use. Have enough to last. Love the container it comes in so it can come with us...but keep in mind it takes 24 hour for glue to cure

I was able to fix my paddle board while I was out using it! I punctured it while I was out and had this kit in my backpack. Easy fix!

First time I tried to patch my board all I did was put a layer of glue with a patch on top and it didn't hold. After cleaning up all of the glue from my 1st try, I left the area rough like it had been sanded. I put the patch on the second time according to the directions in the kit and left a 40lb weight on top of the repair for two days. After a few more days to cure I left it out in the sun for a couple of hours and then filled to a full 15psi and haven't had any problems since.

J'ai acheté cette colle pour reparer mon zodiac afin de ne plus acheter de la bi composant. Efficace, resistante, prise rapide.

Repair some leaks in my inflatable boat Works great

Rien a dire

This kit worked perfectly on two holes that were both roughly 12mm in diameter in my inflatable boat. Cleaning the area to be glued with acetone (not supplied) is 100% essential, I also cleaned the patches supplied with the kit beforehand too. Apply a covering of the glue to both the area around the hole and the supplied patch, then wait 5 minutes before applying a second coating to each once more. 5 minutes after the second coat I then applied the patch over the hole, rubbing the two together with a blunt wooden straight edge. I then left the glue to cure for 48hrs before inflating the RIB (HD Quicksilver 3.5m) and it has held beautiful under load on rough seas. I recommend this product 👌 but acetone must be used pre-gluing in my opinion. I hope this helps 🙏

Envoie rapide. Produit sérieux, bien conçu et de qualité.