Resiners Airless Pro3 Resin Bubble Remover, 3mins Remove 99.99% Bubbles

This bubble remover is a game changer, the best I’ve used! It’s more quiet and smarter than my previous bubble remover. I split my Resin into four separate cups and all 4 cups fit into this bubble remover with extra room that I could probably fit a 5th in there. It’s so easy to use, take the top off, picture cups in, place the top back on make sure that everything is snug and press the button. I usually set mine for five minutes and end up with zero bubbles.

I was looking for a vacuum chamber to degas two-part silicone I'm casting into small parts. I didn't want to buy an air compressor and have a big pot or hoses running around. Then I ran across this little vacuum chamber and thought I'd give it a try. So far, I'm impressed! I've used it several times now to cast some silicone. Each time it's worked really well to degas small quantities of silicone. My parts have turned out really well with no bubbles or voids. Will it last..? That I can't say. But it feels like it's made well. The clear chamber seems relatively thick and solid. I haven't had problems with the seal at all. And it's easy to open after it's done running. Touch buttons also have worked well. If it holds up, it'll be well-worth the money spent.

This is an amazing product that works really well at removing the bubbles. It has different levels, so if you are working with higher viscosity resin, it allows you to pull for longer periods of time. The quality of my resin work has substantially improved since using this bubble remover allowing me to get crystal clear pours . I have a lot of resiners products and I absolutely love every single one of them.

Best tool for those resin artists/crafters who are mixing small batches of resin and wanting a smooth texture without the pits caused by bubbles. I can easily fit 3 plastic 8 ounce cups at one time, and if I don’t overfill them can fit 4, it takes me no longer than 10 minutes to go from cloudy with bubbles to clean and clear! A couple of things to watch out for, if you overfill your cup watch it carefully as it will overflow and you’ll have resin inside the machine. I keep my cups no more than 6 ounces full and squirt 2 times from my 99% isopropyl alcohol bottle on the top of the resin to stop the bubbles from exploding too fast. It’s a powerful machine and worth the money and the time to get to know it. If you see that you are overflowing, it is easy to shut off and release the pressure, then start the machine again. It’s a bit loud, but I don’t mind that as it works so well that I’d forgive it even if it was louder than it is. Customer service with “Let’s Resin” is top notch, I got 2 machines that wouldn’t get to 99% vacuum and the return and turnaround time was lightening fast and the people were helpful and accommodating. It really does make a difference to your resin, so if you love creating art with resin, make this the splurge you’ll never regret

I love this machine it really works well, and the customer service is amazing answered quickly and replaced the item very fast, I was treated politely, definitely will buy from resiners again

This thing works great and I even put my molds right in there and it helps with my biggest problem molds too! Save yourself all the bubble ridden resin pieces and take the leap!

Sometimes I mix resin quickly and end up making more bubbles than I should, this takes care of that. Good tool to have if you like resin arts/crafts.

WOW this machine is AMAZING. I just started with resin and have been really excited about making things as I order and receive a new mold only to be really disappointed because no matter what method, tip, trick I used to prevent bubbles there they were there at the end and my pieces just didn’t look good. The piece I was having the most bubbles in is a pumpkin container with a lid. So that was the first thing I used the bubble remover on and STUNNING RESULTS. It looks so good. This is the GAME CHANGER that I needed and I could not be more happy with the results. If you complain because you bought one and it exploded resin all over the inside it’s your fault only fill your cups 1/2 full like the directions say. And sit and watch it the first time with each resin you use if it starts to look like that will happen power it off let the resin go down and then turn it back on I did that the first time because I really thought it would overflow but I got a little more brave with each use. I was making a piece that takes about 22-24 oz of resin and it was hard to only do 12 oz (4 oz each in 3 cups) then another 12 oz but I am glad I did and the results are WOW. I was so happy with this item received sept 3 2025 it has quit working on 11/4/2025 so not worth it.

I previously bought another cheaper brand and boy oh boy, you definitely pay for what you get!! Basically I ended up with an unusable machine with 14oz stuck in it because it wouldn't release pressure. They didn't reply to my emails either. Anyway, I'd watched so many videos on YouTube in order to make sure I purchased the best one.... and saw The Resiners Bubble Remover Airless Pro.... a bit more than I planned to spend but WOW! The only word that I need to say is RESINERS! This machine is AMAZING!!! Soooo easy to use, looks lovely in my craft room and I'd never be without it. I am so impressed with the functionality and the ability to stop the machine and release the pressure AT ANY POINT! I do find myself sat watching the bubbles popping in the cups instead of getting on with something else ha ha. My resin comes out crystal clear and I have confidence that if I want just a project to be clear then I know that my resin will be bubble free... sometimes there may be a few tiny bubbles but you can pop them with a spray of alcohol. I've now got quite a few of Resiners products and the quality is spot on. You will NOT be disappointed and their customer service is second to none. The value for money, peace of mind, ease of use and capacity is brilliant... looks classy too. I cut a piece of silicone mat to fit into the bottom of my machine in case of any spillage. Another great feature is that you don't have to lift the lid over the cups of resin you've just removed the bubbles from, you simply lift the top away which is another great design feature of this machine.

Funktioniert Top! Blasenfreies Gießen!

Mi sono trovato benissimo Niente contro solo pro

Très bien

Works well