SILIGUN™ PRO Compact 24:1 Caulking Gun - No Drip Caulk Gun - Patent Design - Lightweight Aluminum Frame - Works with all 10 oz Tubes (SILIGUN PRO)

I’m very impressed with this SILIGUN PRO caulking gun. The compact design makes it much easier to work in tight spaces compared to a traditional caulking gun. It feels solid and well-built, and the 24:1 thrust ratio provides plenty of power while still giving you good control over the flow. The no-drip feature is a big plus and helps keep the job cleaner with less wasted material. Loading and using it is simple, and it feels comfortable in the hand even during longer projects. Definitely a great tool for DIY projects, home repairs, or professional use. Highly recommended!

Worked like the said it would. Very nice

This touts a slick look and ease of use. NOT SO! This thing is hard to load [a mallet helps] and virtually impossible to remove the caulk tube. When I finally got the Gorilla Glue tube in, it was very hard the squeeze the trigger - took two hands. This is a poor design. Using this device is waste of money and time. Notice that the video reviewers do not show them actually using the gun. It's going back now!

I like this pretty good, but it STILL runs a bit after triggering. I have a bad right hand and the pull trigger is wide, so I usually have to use both hands to pull it's trigger. It IS great for tight spaces and way more easy to swap hands when way up on an extension ladder. the WORST part is getting the empty tube OUT. ...I have to take it to the truck and clamp some vice grips to the nozzle and pull it while hitting the tube out with a hammer. very tough to do. ...and dried caulking gets in front of the internal cutting blade and I have to use a small screwdriver to dig the dried caulk out from time-to-time. ... but it's shortness still makes it worth using

I really like the design, it is very easy to use. Haven't had any issues in the tight places. Although it only lasted about three months, and then the clutch gave out

This product would benefit from a couple of design improvements. The handle spacing is quite wide, making the gun difficult and uncomfortable to squeeze. Because of this spacing, the handles also lack adequate grip, causing fingers to slide during use. Additionally, despite being advertised as a no-drip caulking gun, it did not perform as claimed. Activating the release trigger did not stop the flow of caulk, resulting in continued dispensing and excess mess. While the concept is promising, functional and ergonomic refinements are needed to improve performance and usability.

This was my first time to use anything different than the old original style caulk guns, and this new gun worked wonderfully. This was much easier to control, and the power to pull ratio was good for me. I was reinstalling the baseboard next to a toilet, so I trimmed off the extra tube behind the gun’s body. I started my caulking run at the end away from the toilet, which left the section remaining by the toilet, with the shortest overall length. Wow, such a small footprint! I loved it!! This caulking gun is made well and looks like it could last forever.

First, my use case. I've started rebuilding aquariums, my own as a test bed. I've done it before and built sumps/refugium's, but it is always a hassle with a standard caulking gun with the stepper/presser bar sticking out of the back, and smacking your tanks. With this one my obstruction is limited at first to the size of the caulk, and half the length of the Siligun. Once the caulk passes through to the back of the Siligun, your max length is the caulk tube. I did not do any trials on any other material, simply glass, and I went at it assuming proper function, and aside from not properly seating the first tube, it went flawlessly. I won't discuss application because that is entirely a function of style, angle, cut of the feed tube, speed and consistency of application. Not a one of these can or should Siligun attempt to address other than suggestions. Prior to ordering this I read the reviews, and instantly discarded any emotional feedback, or those user error/application issues. What would I change? A little disappointed that the clutch trigger carries across the plastic molded version from the all plastic gun. If mine makes it through 2 more tubes of caulk, the hang on hook is going to be removed. And while it would make it more expensive, I'd build in some form of lifter for the tube cutter, so when the job is done, it would be easier to retract the tube from the gun. All of my successes in removing the, so far, 2 tubes has been from a simple manipulation of the clutch. Another thing I noticed, and it is not yet a problem, is that which has been called out previous; that being the skateboard texture that lines the clutch puller slit internal. Mine is working fine, but some have said after repetitive use, the texture gums up with the abrasion of the caulking tube. This "might" be helped if that was a reverse cleating, small reverse ramps facing toward the rear of the clutch. Hats off for reinventing the caulking gun, and I can't wait to see what their Gen 2's will improve upon.

Top product. Echt vakman hulp makelijk klein.

Super Silikon Pistole! Sehr robust da sie aus Metall ist und eine lange Haltbarkeit hat! Vorallem ist gerade kleinen Ecken von großen Vorteil .

Seems to be a solid product, not yet tried it in real action.

I just received this new gun for caulking and so far it's pretty good. Now, I'm coming using cheap and cheerful silicone/ caulking tube guns, to try this. The good is the quality is excellent. Really well constructed and robust feel. As the tube empties, the gun slices the back of the tube, which is good and bad. Good because it's easier to cut it off, but bad because the slicing blade stops you from twisting the gun inside the gun. This matters when you want to adjust the angle of the nozzle, but can't.....like you could with a cheap gun. Also, releasing pressure on the tube is not that easy and you will always have caulk dripping out the end. Maybe I just need to get more used to it.

We had the original plastic variant, which proved extremely good, albeit, the gear mechanism finally failed, having said that, it had many hours of hard use and was the go too gun for caulking. The upgraded aluminium design, seems to be far more superior and already has been put to use. it's a lot less bulky than a traditional gun, nevertheless, does the job and is ideal for awkward areas. Ideal gun to have in the tool box.