FR-301 Portable Desoldering Tool

Good value for someone who knows what they are getting. Yes, this is the eastern Japanese version. Eastern Japan's electrical grid is 100v at 50hz. Western Japan is 110/120v at 60hz. Two different power grids on one island country. This can be made to safely work here in North America with a simple, cheap mod. It has been listed here in the reviews, a number of electronics websites like eevblog, and even a YouTube video showing a step by step. You can also use an inverter if you have one, but it should be at least 500 watts at a minimum. The nominal wattage value for this version is approximately 100 watts. However during heatup, it can jump more than four times the nominal value. If your inverter can't deliver that, it will keep blowing it's fuses. You get everything in this version that you do with the US version with exception of the manual. Of course you get the Japanese version of that. This unit works very well for its intended purposes. It's a portable/field desoldering tool. It was never intended to be a bench tool. It is heavy compared to bench based desoldering tools. It will fatigue your wrists quickly if you try to desolder several 40 pin dip chips. I use this on arcade machines that getting the boards to the bench is more of a pita. So I can more easily bring this tool to the machine and it's grat for that. I use a couple of pace desoldering machines at the bench. They are night and day better but used in a different environment because it's the bench. You will want to get a couple of different sized tips, cleaning rods, filter packs, and a hakko 633 stand with the money you save getting this version. You can use this as a one and only desoldering tool at the bench, but be ready to learn it's quirks. It requires more frequent cleaning than a bench model, it's heavy at a couple of pounds compared to 6 to 8 oz of a bench model, and it's balanced very poorly because it needs to have the pump in the unit itself. All of this can really irritate the user unless they are aware of these issues up front. The 1.0mm included tip is a wee bit to large for many leads and you will struggle to make it work. Get a 0.8 mm for things like passive components like resistors, and capacitors. This really is a good value, for a good tool. Just mod it or use a good inverter. If you run it off 120v it will slowly overdrive and kill the pump. The single most complex and expensive item to replace. It's great for bringing the tool to the thing your working on when you can't easily work the other way. ***EDIT*** I just thought I would add in the fact that the heating element is the same one on the American model, and doesn't require modding. It can safely run on 100v or 120v. It's the pump that needs a pair of 300ohm resistors to replace the ones already on the circuit board. Or the power inverter. The pump replacement would have to be the Japanese model if you don't do the mod because of the power differences.

Love this desoldering iron! I got this one because my last one failed. The pump is stronger in this one and it just plain works great. you do need to keep it clean though. Great product!

I didn't think I would like it but this is so much better than the cheaper bench models. I have constant clogs and unrepairable desolder guns from the inexpensive bench units while this has given me very little trouble. But if you get the overseas version, you will need to do the conversion for 120V operation.

Great heat transfer and excellent suction with the appropriately sized nozzle. Super time savor for cleaning up pads and desoldering components. Great selection of tips for different component sizes. I wish I had purchased it sooner for my toolkit. Replacement parts are easily available and not that pricey. Excellent tool.

This is absolutely a must-have tool for big soldering jobs. If you work on vintage electronics like shortwave receivers or other classic gear, this tool is for you. It heats up very quickly and has excellent suction power. It is a bit pricey, but it’s worth every penny considering how well it performs. I recently recapped a shortwave receiver, and I honestly couldn’t have done it without this tool. I tried others, and they just didn’t work. Buy this and you’ll see; it’s one of those tools you can’t live without, especially when working on vintage electronics.

As mentioned in numerous other 1 star reviews, this unit is for use with 100-volt power. It will not work properly in the US, and you will get 1year of use out of it, TOPS, before you need to replace the heating element, which is hard to source, and expensive. Do yourself a favor and get one from somewhere else, or get a different model entirely. I learned this the hard way.

I've had manual pump and heated pump pens that work but this tool is required if you work on electronics. It's fast and efficient and will not damage fragile circuit boards if used correctly.

Is it a necessary tool for desoldering, no. Does it make desoldering much easier, absolutely, but within reason (You would really only use this for thru-hole desoldering) First thing you'll notice when you get it is that it feels like a kids toy or like you're holding an overpriced hot glue gun. Having said that, it does perform much better than you would initially think. You feel no heat transference when holding the tool, the tip gets up to temperature very quickly and it sucks up the solder really quickly. It's easy to empty out the slag catch and change out the tips with the provided tools. The tool is not too big in the hand, very light, and easy to handle.

Japanese manual, non-compliant plug, not certified for CSA, but that's typical for a Japanese import item like this. This is not suitable for use in a professional workplace with strict tool policies. That being said, it's very light and portable, genuine Hakko quality, it works great, and it's much cheaper than trying to get the North American equivalent. Worth every penny, zero regrets here.

Excelente equipo funciona súper bien, lo recomiendo esta herramienta me facilita la extracción de soldadura más fácil

Compré la versión japonesa porque es más barata que la de 120 V. Para poder usarla, tuve que abrir la herramienta y cambiar la resistencia de 10 ohms por dos de 270 ohms (3W). Buscando en internet encontré varios videos donde explican el proceso, aunque la mayoría recomienda usar resistencias de 300 ohms. En mi caso preferí usar de 270 ohms, ya que investigando vi que la bomba de succión trabaja a 98 V, y con las de 300 ohms pierde un poco de potencia. Pero igual si prefieren usar resistencias de 300 Ohms funciona ya que son las rresistencias que vienen con la versión original de fabrica de 120 V.

I know I lucked out with the price. $200 less than retail, but this is the Japanese version, so you have to download the English manual. Still... does what it says and performs amazing.

La mejor herramienta para desoldar componentes sin dañarlos