SureCut Deluxe Paper Cutter, Precise Trimmer Tool, 12" Cut Length

Like everyone else I was concerned about the too positive and the too negative reviews but I needed a new cutter because the strip of cutting mat under the blade of my swingline rotary paper cutter I got from Michaels was hopelessly damaged and unreplaceable and the cuts were no longer even remotely straight. This ceramic blade cuts clean and the wire guide is a GAME CHANGER. Took a gamble on this because it was so cheap but it's soooo much better than the swingline, smaller too and yet capable of guiding larger pieces of paper with the swing out arm. A+

I purchased this before reading multiple consumer reviews on top paper trimmers, and I began second-guessing the purchase. Although this was highly rated, it often didn’t make the “top 10,” and some of those that did were less expensive. Still, I thought I’d try it—and if I didn’t like it, I’d return it. Surprise, surprise—I really like this. Right out of the package, my doubts intensified. This thing is very light. My first thought was that it might not be sturdy. I almost returned it immediately. But I needed a paper trimmer, so I decided to give it a trial period. Fiskars made a believer out of me—I ended up loving it. Pros: 1. Yes, it’s lightweight (in a good way). It’s easy to move to clear the tabletop for other projects—unlike heavier cutters that feel more like fixtures. I can even set it on its side without worrying about scratching my table. 2. Stable. The rubber feet do a great job keeping it from sliding. 3. Blade vs. rotary cutter (this matters). This uses a sliding blade, not a rotary cutter. Rotary cutters press down on paper, which can cause drift. This cuts from the side. TIP: Push the blade upward instead of pulling it down—this keeps the paper pressed against the guide and reduces drift even further. I own a rotary cutter, and this is cleaner and more precise. 4. Accurate measurement grid. The grid is spot on. On another trimmer I considered, customers complained the grid was off. That’s a basic requirement—if a company can’t get that right, what else might be wrong? 5. Clear cutting guide (wire). This is a standout feature. It actually shows you where the cut will land. With my rotary cutter, I often had to guess—leading to inconsistent results. 6. Durable blade. I cut 500 sheets of 8.5" x 11", 28 lb paper into quarters without noticing any dulling. For comparison, before I received this, I was using a box cutter, ruler, and T-square. My box cutter needed a new blade after ~200 sheets—and destroyed my self-healing mat. 7. Huge time saver. Before this, I was cutting with a ruler, T-square, and box cutter—slow and tedious. This reduced my cutting time by at least 75% and produced more consistent results. Cons: 1. No right-side support. This isn’t unique to this trimmer—most have the same issue. Pages droop on the right side, which can lead to drift. TIP: I use a book of equal height to support the paper so it lays flat when cutting. 2. No built-in backstop for repeat cuts. It would be helpful to have a left hand guide to ensure consistent sizing—this one doesn’t but then again, very few actually do. TIP: I used binder clips and a ruler to create a makeshift left side backstop, and it worked well for my project. 3. Limited stack cutting (for precision). I only cut 4 sheets at a time (28 lb paper) to avoid drift. You could likely cut more with standard 20 lb paper, but I prioritized consistency. I wouldn't cut more than 10 sheets of standard 20 lb paper with this. Bottom line: I went from doubting this product to really appreciating it. Fiskars makes a quality tool, and this one delivers—especially if precision matters.

This is a great paper cutter, especially for lightwork, art journaling collage. Et, cetera, however, you cannot put very many pages in at once, so it's best for beginner/ single page projects. I bought the replacement blade at the same time.But haven't had to replace it yet.So I don't know how easy it is. I haven't used the swing arm.Don't seem to need it. I definitely recommend this item for light work

Where has this been all my life? I recently got into junk journaling and needed something smaller than a bulky paper cutout. Something I could easily keep with my supplies while still giving clean, straight cuts. I had one of the larger guillotine-style cutters before, and I could never seem to get perfectly straight cuts with it. This new one makes a huge difference; the cuts are clean, straight, and consistent. I also did quite a bit of research before purchasing, and specifically wanted a cutter that could handle more than just standard paper. This one works for both regular paper and larger scrapbook paper sizes, which was exactly what I was looking for. It’s compact, easy to use, and fits in with my other supplies without taking up much space. So far, I haven’t had any issues. I’m really happy with it and wish I had found it sooner.

I love this paper cutter! It is easy to use and to store. It’s expensive but I believe worth the price and because it’s a Fiskars product I know I can always get replacement blades etc when needed.

I received it today and I'm giving it a favorable review. At the time of purchase it was about $36, but with a coupon it came down to about $23. It cuts well and is definitely an upgrade from the generic paper trimmer I got from Hobby Lobby. My only complaint is the white alignment grid decal. It’s a 12×6-inch decal, and in the center there was an obvious bubble where it hadn’t fully adhered to the plastic surface. I used my vinyl weeding tool to poke a small hole and then used a brayer and vinyl squeegee to press it down. That helped, but there are still some smaller bubbles—nothing that affects performance, though. Alignment is easy, and I think it’s the best feature. I primarily cut vinyl for my Cricut projects and DTF transfer sheets, and it works well for both. When you place the trimmer on a dark surface, you can see a 1/8-inch gap between the white alignment decals, and that space is exactly where the cut is made. This is especially helpful for DTF sheets since it makes alignment easier and allows for precise cuts without damaging the transfers. Overall, it’s a really good trimmer - easy to align, accurate, and simple to use. The extending ruler arm seems solid for a plastic build, and I appreciate the extra blade, though it would be nice if it had onboard storage for it. I just wish the alignment decal were applied more cleanly. For what I paid, I don’t have buyer’s remorse.

I have had many Fiskar trimmers in my life. This one is by far superior to all I have ever had before. These are the reasons: 1. It came with two blades which was really nice. 2. The cutting mechanism has a slide button that locks it into place so it's not constantly flipping up when traveling. It keeps it secure so that it doesn't break or so that you don't cut your finger when you're trying to take it out of your bag. 3. This trimmer has a wire right where the cut will be made. The wire is above the paper so that you can see EXACTLY where the cut will be made. This allows for even more precise trimming. 4. The surface for your paper to sit on is 6 inches when it used to be only 4 inches, so you can cut up to 6 inches and measure exactly without having to open the extension arm. This is also a very nice quality. 5. The anti-slip rubber corners are substantial, so when you are cutting, the trimmer stays firmly in place. I highly recommend this product!

I was looking for a full-sized paper cutter - one with an arm you swing - but this Fiskaers paper cutter is a good value and does everything I need. Still miss the arm I wanted to chop paper with, but I have adapted to the slicing action of this paper cutter.

Not sure if we're all reviewing the same product but my "precision" cutter is not precise at all unlike what most people are saying. I do see a few other reviewers have noted the same as me. The wire bends, line up the wire with where you want to cut and it's off by a couple of milimeters. The cutting blade moves, the plastic guide bends as you cut so you have to basically adjust the paper left by a few millimeters and hold down the arm so it doesn't bend in as you cut and cause a curved cut. Wish I'd bought the Dahle.

Great trimmer. The measurements are easy to read as you place the paper over the ruler, also the wire helps you see exactly where you are cutting. I have drawn with a black sharpie on the wire to make it even more obvious. One reviewer had said it's not for crafters, I disagree. It's the best trimmer I've had and I've been crafting for 30+ years.

Sehr präzise und genau

This cutter works so well for me. I have an old the Creative Memories cutter but it doesn't compete with this one. Two comments: 1) I wish this came with the size markings as on the SureCut Deluxe model, making it much easier for cutting paper sizes. It's too bad that model is currently unavailable on Amazon since it's an older one, but I'll look for it elsewhere. 2) One other improvement is to for one of the two blades to be blunt scorer as I have seen creators use a paper cutter that has this feature. It would be so useful and somewhat avoid needing a scoring board. Otherwise, this is a good purchase and worth it's price.

This an investment you can rely on.