Auxbeam 8 Gang Switch Panel RA80 Toggle Momentary Pulsed RGB Dimmabl

I was pleasantly surprised at how easy this was to configure and install the included manuals made it easy to wire up, there are lots of choices for connections so the unit can handle about anything you want to connect to it. Simplifies the control of multiple accessories, simplifies wiring and functionality is perfect. Display is plenty bright with different color LEDs tonindicTe programmed mode.

Why did you pick this product vs others?:UPDATE, the company reached out to me and offered to send me a panel without the low voltage shut off. If you are needing to use this to trigger a starter make sure you get the correct unit. I would buy from them again! The switch panel would be good if you are only wanting to run acc. I purchased this thinking I could use it as a 1 stop switch for my buggy. I was wanting to use to power fans, fuel pump, ignition, light. AND TO START THE BUGGY. It failed in my application. When you engage the starter the voltage draw drops below 12 volts ( normal operation) and when this occurs the switch panel turns off due to low voltage, thus causing everything to turn off. It's impossible to get around this. I did end up using it to power some LED light and some aux fans. It does good for that but in my opinion this switch is a FAIL

Very happy with this purchase. Don’t have to use the relays for LEDs. Way easier to install with this!

Love my switch panel ,great price , easy to install.

Great product ! For someone with beginner /mid car wiring experience this was a great and easy product to use. The size is very compact which made the placement inside my truck very easy. The connectivity and response of the system in general makes it a great multi accessory control.

Right from the start, I was impressed by this kit; the presentation and packaging are really well done, keeping everything organized and secure. Before picking up the Auxbeam RA80, my biggest headache was dealing with the chaos of multiple accessories. I absolutely hated having a mismatched collection of different switches scattered all over my cab, with a tangled mess of associated wires running every which way under the hood. It looked messy and felt disorganized. This system completely solved that problem, streamlining the entire layout while massively upgrading my vehicle's electrical safety. Installation & Mounting: The install process was incredibly straightforward. I mounted the main control box to an aftermarket engine bay accessory mount. Because of the specific footprint of my mounting plate (not a flaw on Auxbeam's part), I ended up mounting the circuit breaker neatly to the side of the bracket, which actually worked out great. Inside the cab, I ran the switch panel right to the center console. It sits perfectly within arm's reach while driving, and the button backlighting makes it effortless to operate in dark environments. Performance, Safety & Value: Right now, I have my hood pods, comms radios, and the factory vehicle stability control (VSC) system routed through the RA80. If you own an early-model FJ Cruiser, you know that Toyota didn't include a factory VSC cutoff switch, which is incredibly frustrating when you need to disable it for off-roading. To fix this, I tapped directly into the vehicle's factory wiring harness and ran the trigger wire straight to the Auxbeam control box. Now, instead of a dozen individual accessory wires breaching the firewall, everything feeds into one clean central hub. And no more random switches everywhere! For the price point, this unit offers an exceptional value, delivering high-tier performance and heavy-duty safety features without the premium cost of higher-end brands. Out of the box, the components feel really durable and ruggedly built, which is exactly what you want for a rig that sees rough trails. My Wish List for Next-Gen Upgrades: While the hardware performance is stellar for the money, there are two quality-of-life features I really wish Auxbeam would introduce in a future update to make this the ultimate overland switch panel: 1 A Startup Memory Feature: I wish there was a way to set designated circuits to automatically power ON when the vehicle starts up. Because I have critical gear like my radios and that factory VSC circuit routed through the panel, I’d love for them to boot up immediately with the ignition rather than having to manually power on the panel and press the buttons every single time I start the rig. 2 An Updated Overland Sticker Pack: The included sheet of pre-printed icon labels has plenty of options, but I wish it included a few more modern off-road specific titles. I was bummed to find there weren't stickers for highly common trail additions like "Chase Lights" or a specific "Traction Control" / "VSC" label to match my factory mod. My Wish List for Next-Gen Upgrades: While the hardware performance is stellar for the money, there are two quality-of-life features I really wish Auxbeam would introduce in a future update to make this the ultimate overland switch panel: 1. A Startup Power On Feature: I wish there was a way to set designated circuits to automatically power ON when the vehicle starts up. Because I have critical gear like my radios and that factory VSC circuit routed through the panel, I’d love for them to boot up immediately with the ignition rather than having to manually power on the panel and press the buttons every single time I start the rig. 2. An Updated Overland Sticker Pack: The included sheet of pre-printed icon labels has plenty of options, but I wish it included a few more modern off-road specific titles. I was bummed to find there weren't stickers for highly common trail additions like "Chase Lights" or a specific "Traction Control" / "VSC" label to match my factory mod. Final Verdict: If you are tired of wire clutter and want a durable, safe, and streamlined way to manage your accessories , this is a highly recommended upgrade. It makes your electrical system infinitely safer. If Auxbeam grants my wish for a startup power feature and expands their sticker pack, this would easily be a flawless 5-star product.

Absolutely incredible invention. Simplifies the installation of electrical components for a professional or an amateur like myself. Has built in relays and each switch is separate with its own fuse from 5amp to 30 amp. Thank you Auxbeam! I love it! Instructions are clear and installation was quite enjoyable.

I purchased my 8 gang switch panel almost a year ago. It has been one of the most underrated mods I've done. It keeps wiring clean and simple. Mine is installed on my 2021 Toyota Tacoma. So far I'm running 3 sets of lights. Great product for the money

電装が増えスイッチの管理をトグロスイッチの配線が増えすぎて限界を感じていたため、導入しました。管理が抜群に楽になり、これは最初から導入すれば良かったです。有線式にしたのですが10ftのケーブルがついてきますが長さがギリギリで15ft欲しかったです。 中のヒューズが低背ヒューズではなかったのでそのまま使えず追加購入が必要になりました。ヒューズボックスの上にマウントするとスッキリ使えてまとめやすかったです。

Nice and very easy

excelente opcion para organizar tus luces y demas cosas

No, Auxbeam does not make ultra high-end / premium auxiliary light controllers. What they make are simple, straight forward controllers that works and don't break the bank. I went for a more basic 8 switch unit. The switch panel is nice and solid with good mounting options. The mount pattern is pretty standard, so there are lots of aftermarket mount options as well. Running just one control wire through the firewall was nice too. The relay / control box is pretty standard....plastic shrouding isn't too bad, but may not be suitable to mount a bunch of stuff on top of. Breaker looks decent too. Instructions were straight forward and provided good information for personalizing the fuse arrangement to get the switch panel to match the layout I wanted. Considering it has weathered a cross-Canada trip where I was in 4 days of rain, running various lights (some extended time, sometimes lit up like a Christmas tree so I could be seen), I'd say it can take a pretty decent workout too. Overall: good quality, decent price and it works...if you don't need adjustable panel colors or flashing or momentary on light functions, then this is the way to go.

I bought 2 of them to be installed in my JKU 2014 jeep wrangler rubicon, i installed 1 in the engine for exterior wiring (ex: bar lights, innerfenderlights....etc), and the other one inside the jeep for interior wiring (ex: dashcam, interior lights....etc) And i love it and recommended by my Mechanic