







Homeet Provide you good product Provide you good service Meet you in your home Specification: Nozzle material: copper plating Needle material: stainless steel Material of wrench: stainless steel alloy Caliber: 0,2mm & 0,3mm & 0,5mm Needle Length: 130mm Nozzle Height: 6mm Diameter of nozzle: 2mm Packing list: 1x 0,2mm Nozzle 1x 0,3mm Nozzle 1x 0,5mm Nozzle 1x 0,2mm Needle 1x 0,3mm Needle 1x 0,5mm Needle 1x Special Wrench NOTE: The product is small in size, please keep it properly. If your airbrush pen cannot use our products, please contact us to find a solution. If you need other accessories, please feel free to contact us. If you have any questions about us or the products, please contact us freely at any time.
| Asin | B07D6TFGP9 |
| Brand Name | Homeet |
| Colour | Multi-coloured |
| Customer Reviews | 4.3 4.3 out of 5 stars (1,419) 4.3 out of 5 stars |
| Educational Objective | Imagine, invent, create |
| Is Assembly Required | No |
| Item Weight | 0.02 Kilograms |
| Manufacturer | Homeet |
| Manufacturer Part Number | MC18-PB01 |
| Material Type | Stainless Steel |
| Operation Mode | Manual |
| Power Source | Hand-powered |
| Size | Small |
| Supported Battery Types | No batteries required |
| Upc | 654070745486 |
User
Good quality for the price and great service from the seller
Item works really well, easy to attach and replace. Product is very professional quality wise. Had a slight fault with one of the nozzles, which sheared off and caused my airbrush to be unusable however this was due to a fault in the thread. They were great with communicating and even sent me a replacement airbrush along with the replacement nozzles which were perfect. The second set I received were totally fine and a lot sturdier so must have just been a bad nozzle.
User
Excelent Product
I ordered these for my Iwata Neo which I use for painting wargames miniatures. I was not confident they would work as I had seen very mixed reviews elsewhere. Well they fitted perfectly, though I did have to take my time to ensure the thread on the nozzle went in properly and it took a few goes. Setting up with the 0.3mm rather than the 0.35mm that the brush came with I immediately noticed an improvement in control and flow. I strongly recommend these.
User
Good quality kit.
Good value for money, fitted both air brushes I have of different makes, mainly wanted as back up just in case I damaged one, found that the 2.0mm nozzle worked better than the original one.
User
Tried two, all ok
Fitted two of the nozzles into two different airbrushes, no problems with either, tested brushes, all ok. In business again! When fitting nozzles watch the o-ring when that starts to squash stop, nozzle only needs to be nipped up. If you need to remove a broken nozzle, needle pushed into the centre and rotated will bring it out.
User
Nozzel sheered off
Possibly my fault but I doubt it very much, putting the 0.2 nozzel on and it sheered off whilst tightening not only snapping the nozzel but leaving the other half of the screw bit in my airbrush. Hopefully I can get that out but what a pain in the wotsit!Customer service from the seller has been spot on. Tried to help me resolve the issue of my stuck screw. Added another star for customer service!
User
AS desctibed
This is an excellent product and good value For Money. I would also recommend . Amazon for their Fast delivery and attention to detail. hank you. J. Cassidy.
User
As expected
Great bit of gear does what it says quick to deliver
User
Nozzle sheered off on 1st use.
0.5mm nozzle sheered off and broke inside the thread of the airbrush on 1st attempted use. Am sure it was correctly threaded and was only hand tightening. Now have a jammed up airbrush and money down the drain.
User
Works with all makes
Works with any type of airbrush
User
Teşekkürler
Görselde anlatıldığı gibi eksiksiksiz olarak geldi .Teşekkürler.
User
Parfait
S'adapte très bien à mon aérographe !
User
Perfecto
Perfecto kit de reparacion , completo y muy bien presentado
User
Goed produkt
Prima produky
Trustpilot
3 weeks ago
1 week ago