WestHunter Optics Precision Picatinny Scope Rings with 120 MOA Adjustment, 1 Inch 30mm 34mm Tube Adjustable Height Scope Mount with Bubble Level

I needed the adjustably these provide

Make sure you get all the screws good and tight! I thought I had, even used a torque wrench, but wasted a shooting outing because they slipped. This is a first for me. These are more prone to slipping than most.

I was a bit spectacle about these mounts until I received and used them. I like them so much that ordered another set for another rifle I recently purchased because how great this company’s products turned out to be!

Easy to set up once you understand how little you need.

Look great and work well.

I'd never heard of West Hunter before, but these rings caught my eye while shopping for a scope. The adjustable height and versatility, plus the affordable price, made them worth a try.First off, the machining is excellent. The edges are clean with no imperfections, and the finish has a nice, rugged, matte black look. The rings use four Allen bolts to securely clamp around the scope tube, and they feel rock-solid (torque specs marked on the rings). The lowest setting was perfect for my 30-06, so I didn't need to adjust the height, but it's easy to do if needed. I also appreciated that I didn't need the 1-inch plastic(?) scope tube adapters. The built-in bubble level on one of the rings is handy once you get used to using it.The mounting bolts fit snugly into the Picatinny rail, and tightening them down with the Allen wrench ensures a secure fit. While there aren't recoil stops, the cross bolts do a good job preventing movement.Overall, these rings feel well-made and offer a lot of features for the price. I'm happy with my purchase.---Product: WestHunter Optics Precision Picatinny Scope Rings with 120 MOA Adjustment, 1 Inch 30mm Tube Adjustable Height Scope Mount with Bubble Level | 32mm to 38mm Center HeightASIN: B0DCJL23M2

First time trying the West Hunter product here, never heard about this company before. But I was intrigued by their adjustable height design and its ultimate versatility, plus they are super cheap at around 30 bucks, so I thought "why not?". These rings function similarly to the FX Airguns No-Limit series scope rings, but they cost about 3 times less. They are perfect for mounting telescopic optics onto flattop style AR-15 rifles or any other rifle with Picatinny rail. The feature that put these scope rings aside from others is that you can adjust height from 32 to 38 mm by simply loosening the two screws in the side, adjusting the top ring piece at the desired height, and tightening the screws back to lock the ring. This is a unique feature of these rings that allows you to set them up for practically any scope. Height adjustment is a cool feature. I can use them for trying out different scopes, but the most important for me is the ability to change the angle of the scope vs the rifle’s rail in order to compensate barrel droop (mostly in airguns) or bullet drop (for long range shooting). I.e., you can mount the scope looking slightly downward (and barrel slightly upward). It’s very specific for long range setup and provides you with “fixed” bullet drop compensation. Without this feature, you would have to move your scope reticle down to achieve the same compensation, which would limit the effective vertical range of adjustments of your scope. This is an extremely important feature for long range shooting and.The build quality seems to be very good, but not as good as Vortex products' quality. They are not as precisely made as Vortex ones, and I can see a lot of small imperfections and casting marks (yes, they seem to be cast, not machined). The fit and finish seems to be fine in general with all black matte anodizing, but it's not mil-spec. I didn't have any alignment issues with the rings, but I still had to lap them for perfect fit, which means that they are not as precisely made as top brands. The rings utilize two Allen bolts on each side to lock in two halves around the scope's tube tight, which is sufficient to prevent movement. The mount base has two Allen screws and two recoil stops, so I wouldn’t worry about the scope shifting and loosing zeroing under heavy recoil, it will hold up just fine. As an added bonus, one of the rings has an integrated small bubble level, which is an awesome feature.Bottom line:These West Hunter adjustable height scope are great overall. These rings can adjust height from 32 to 38 mm, allowing for customized setups for various scopes. This feature helps with compensating for barrel droop and bullet drop, crucial for long-range shooting. While the build quality is decent, it falls short of high-end brands like Vortex, showing some imperfections. However, the rings securely hold the scope in place, with added features like a bubble level in one ring. Overall, these are an excellent and versatile budget option for mounting optics on rifles. Highly recommended, 5 stars in my book!Pros:1. Adjustable height (32 to 38 mm) for versatile scope setups.2. Affordable at around $30, offering great value.3. Effective for compensating barrel droop and bullet drop.4. Secure mounting with Allen bolts and recoil stops.5. Hold up zero under heavy recoil just fine.6. Fit and finish is very good for the price.7. Include a built-in bubble level in one ring.Cons:1. Build quality not as high as premium brands.2. Requires some lapping for a perfect fit.

No. This product will not work with a 34mm scope. Amazon ai is wrong and the heading is wrong. This is a 30mm scope ring with a 1 inch insert. Do not buy this for a 34mm scope.