SporGain Pistol Sight Pusher Tool with Heavy-Duty Construction, for Handguns, Front and Rear Sight Removal/Adjustment, Black

Got this to remove the rear sight on Ruger Security 380 and it got it off with no issues. Really liked how solid the slide was locked down with the 4 side braces. The top brace held a little part of the slide but hung over the ejection port a bit. Still held the slide super firm. The depth screws were easy to use too. Made getting the perfect bite on the sight easy. Was also able to put on the RMSc adapter plate with this as well. Saved me a trip to the gunsmith and whatever charges they would have handed me for the work. And now I can use this for any of my other pistols, or future ones.

This thing is built like a tank. I was not expecting that for the price. It even took the rear sight off the infamous XD with a little persuasion. I would crank until tight and then tap the pusher with a brass punch. That got me a couple more turns, rinse and repeat. Worked great on front sight also. Directions are kind of lacking, but it's really not too hard to figure it out.

For the price this is a good piece of equipment. As others mentioned it's not perfect. I easily changed out the sights of an older (2010 ish) XD, but that one had aftermarket Trijicons which had gone dark. If you take your time to get the slide aligned (especially the sight pushing post with the cut-out slot) and secure the slide into the tool, then it was no problem at all. However.... a new XDM Elite (10mm) was a different story. The rear sight refused to budge... not even a fraction of a fraction! And this is where the biggest design flaw became apparent. The axle for the adjustment 'wheel' (it's more of a winged grippy shape) is about 1" too short, so not only do you give up much needed leverage but you also smash your knuckles against one of the retention knobs. Overall all the knobs tightened and loosened with no issues, and the slide inserts are easy to install & remove. It also seems to be built solid (it's heavy). If it had a longer adjustment wheel axle I would probably give it 5 stars.

I was a little worried from some of the reviews, but I'm glad I got this sight pusher. Local smiths told me it would be 3-4 days to swap the sights on my P365, sounded like a good excuse to buy a new tool. This device is pretty simple and straightforward, it's basically a bunch of clamps. The jaws are pretty sturdy, and over all this unit is well made and beefy. I'm sure there are higher precision devices around, but I was able to swap the sights myself in just a few minutes with no issues didn't even need to clamp it in a vice. The Xray sights are vertical, so no issues with weird angles. My only complaint, and it's a minor one, is that it's difficult to judge exactly where the pusher bar is when installing, and unless your slide is perfectly centered anyway, you're going to have to do some fine adjustment at the range. At the end of the day, a nice tool to have around, and provides a great value for the task if you're impatient like me!

It breaks factory sights

This pusher works very well. I used it on a Glock 17 gen 1 without any problem. This pusher is built very well. The only con is the directions. The steps aren't quite in order but was easy to figure out.

Great functions and easy to use.

Broke my p30 that spent $900 bucks