JCHENG IR Illuminator 4-Led Infrared Light for IR Camera, Quest Series and PSVR2 with Power Adapter

I use two to illuminate the front yard & a 3rd for the deck, works really well with my Axis camera systems, dawn dusk sensor is perfectly calibrated. The front ones are exposed to all weathers & have held up really well with no issues, although I did used adhesive lined heatshrink to seal the power cable joints just to ensure they remain watertight. All in all excellent value, the beam could be considered a little narrow but with only 4 emitters this is to be expected. If you need to cover a larger area consider a bigger unit, or multiples covering specific areas.

Used as a IR light for VR headset use. Works great for using a VR headset in low light conditions. Much improved tracking accuracy. It does run quite hot, so recommend mounting in a place where it’s vented effectively.

Match this with an Imou Ranger 3 or 5 megapixel camera for night vision if you want an indoor setup. This image was taken with an older 2 megapixel Ranger 👇

Not very powerful, wouldn’t recommend.

I use this about 10ft from my cctv camera to cover a dark spot. Works flawlessly

120620Update after 6wks installation the light has obvious signs of moisture ingress. Very disappointed after such a short time. Downgraded from 4 star to 1 star review. Will buy a more expensive unit next. Don't wast your money.Product arrived on time well packed. Installation easy. Light is bright considering it's small size. Beam is relatively narrow but good enough and was as described with 60 degree beam angle rather than a floodlight. Only slight negative is the bracket holes for screws and cable inlet don't have much in the way of waterproofing as supplied so used some PTFE tape around the screws and tape around the cable entry point to hopefully seal against potential water ingress. Time will tell how long lasting it is but at £15 has significantly improved the night vision of my Ring stick up camera.

Only had it a few days but performs very well for the purpose it was bought for, to add some extra IR illumination to go with a video baby monitor. Solid little unit, comes with fixing hardware and seems well put together, being used indoors for the foreseeable future so weatherproofing not a factor.

This has stopped working after only being installed for less then 3 months.

Erhellt sehr schön, wo das Infrarot meiner Dahua Cam etwas schwächelt. Abstrahlwinkel geschätzt ca. 90°. Ich habe zwei davon gegenläufig (einer nach links, einer nach rechts strahlend) montiert, um den Video-Bereich in der Distanz von 5m von oben optimal auszuleuchten. Die Stromversorgung habe ich übrigens über PoE Splitter am PoE Switch mit Y-Adapter am 12V Kabel gemacht. Alles kein Rocket Science, nur zusammen stecken. Perfekt und würde ich so wieder machen!

Acquistato per illuminare una zona periferica del' inquadratura di una videocamera di sicurezza esterna fa egregiamente il suo lavoro, molto potente illumina a giorno il suo settore,era proprio quello ché mi serviva ,ottimo articolo. Aggiornamento: Marzo 2019 ho acquistato il secondo illuminatore identico al precedente con piena soddisfazione di entrambi, illuminano aree periferiche ma importanti poco illuminate dai led delle videocamere con un fascio di infrarossi molto potente e che arriva alla giusta distanza per le videocamere. Quindi a mio parere sono perfetti per il loro utilizzo. È vero che guardando il faretto al buio si vedono distintamente i 4 grandi led rossi, ma questo mi pare normale.

Me permet de jouer ou de regarder des films sur mon Oculus Quest, la nuit dans le noir total.L'illuminateur IR, produit à la fois une lumière quasi invisible à l'oeil nu, et extrêmement puissante pour les caméras de l'Oculus, lui permettant de fonctionner comme si on était de jour.La pièce est bien sombre vu de l'extérieur du casque, mais clair vu de l'intérieur du casque.Fonctionne comme attendu, même si ça n'était pas spécifié pour cet usage dans sa description.Je le pose au sol, pas besoin d'être face caméra, IR compatible et très puissant, juste ce qu'il me fallait !Je recommande vivement ce produit.

Los acabados son los esperados por este precio, pero funciona perfectamente.Lo compré para usar las gafas de realidad virtual Meta Quest 3 en la oscuridad para mayor inmersión y funcionan perfectamente, lo tengo en una esquina de la habitación apuntando al techo.Hice algunas pruebas con una cámara de video antigua con visión nocturna e ilumina bastante, pero si le quito el cristal tintado con el que viene la diferencia es abismal, ilumina como 10 veces más.Se lo he cambiado por un cristal de metacrilato satinado que he cortado a medida. No se si para las gafas RV es necesario, porque cuando hice las primeras pruebas no parecía que tuviera problemas de rastreo aun con el cristal. Es muy fácil de quitar, va enroscado. De paso aproveché para desenchufar el sensor de luz de la placa de circuitos para que esté siempre encendido, lo enciendo y apago con un interruptor Tapo desde el móvil.De serie viene con un sensor de luz y solo se enciende si la luz está apagada, lo cual no está mal, pero me parece que también regula la intensidad, además igualmente para este uso no me interesa que esté encendido toda la noche, por lo cual el sensor no me sirve.

Works perfectly and it is a great value. I mistakenly thought my unit had a short because it would only turn on as I moved it around, it actually has a light sensor and only turns on at night, I was just blocking the sensor from the light. It really helps illuminate things for the night vision security cameras. Nothing bad to say about it, it does what I wanted and turns on only when needed.