ArmorSuit 6 Pack for Garmin Venu 3S (41mm) Screen Protector MilitaryShield HD Clear TPU Film - Made in USA

This is a perfectly fitted screen protector for the Garmin Venu 4. Instructions and videos make the installation process easy even though it's a little messy. 2 very small bubbles after installing but completely disappeared after 24 hours. Touch sensitivity is maintained and works flawlessly. And it's made in the USA!

I haven't used a screen protector on any other watch (Apple Watch, Fitbit) until I got a Garmin Venu 4 (41mm). It's so expensive that I figured I'd be pretty upset if it got scratches on it. Here are some things I liked (+) and don't like (-): + Installation was pretty easy. + It comes with 6 protectors, especially since I had to scrap one after getting a bunch of dust under it. + I don't notice any degradation of display quality with the protector on. - The screen protectors give the watch that cheap plastic feeling when you use the touch screen. I don't like that feeling, but I'm glad I kept it. - Installation isn't perfect. It's easy to install without bubbles, but it does have "bubbles" on the edges, which is kind of annoying. I never had an issue with it coming off by accident, so those points where it's not fully adhered at the edges seem like they're just cosmetic. I don't remember what happened, but I managed to scratch the body of the watch AND the screen protector. I attached photos so you can see the damage to the watch frame and the white marks on the screen-protected face that would have been on the glass if not for this screen protector. I will definitely buy more when I run out. For me, the trade-offs are worth protecting my device.

10/10 packaging 10/10 prep materials 7/10 ease of use Packaging was great, included installation liquid spray, a rubber squeegee, and lint free cloth. The instructions are for an apple watch, but could be applicable to all watches technically. Per the instructions, I cleaned my hands, cleaned the watch surface, sprayed my fingers, then sprayed the screen protector on both sides and applied it. While the soapy liquid was still wet, everything applied easy. But as the liquid started to dry, I noticed little bubbles.. and per the instructions, ignored them thinking it'd go away. But after it fully dried, there were tiny little lint hairs under the screen protector. I have a bit of OCD when it comes to these things, so I tried to fix it multiple times, but each time, it got worse.. Aside from that though, the screen protector covered my Garmin Vivoactive 5 perfectly with about half a millimeter of space around. There's no adhesive, just more of a "static cling" type thing, but it seems to stay on fine even when wet. As long as you don't use a fingernail or some sort of sharp edge that could push up the side of the protector, it should stay on without any issue. Protection-wise, it's just like any other "soft film" type protector you'd expect. Protects the surface from scratches, but not hits. Overall, it works well and if applied correctly, it'd look great too. I just wished that there was some sort of additional application tool/sticker that could prevent lint/small specks from being stuck under the protector.

Great product! So easy to install with no bubbles. Also, made in USA!

These work as expected. Price was decent.

Quality seems fine, once I got it on. There are the standard frustrations with dust and bubbles that you get with most screen protectors. It's also a flexible film vs. glass, which makes it a little finicky to get on just right. The written instructions don't mention it at all, but be sure to pay attention to which side of the protector is face-up.

This item was even better than the description! It was very easy to install on the device, the u-Tube video link they provided was useful, but the written instructions would have been sufficient without the video. Basically, if you keep your fingers moistened (and it only took no more than 2-minutes to install the screen protector) but if needed, you can reapply the spray solution to your fingers as needed, Since ArmorSuit stated their screen protector could be easily removed, I resisted the urge to power up the device (as I didn't wanted to make sure the screen was a clean as it could possibly be) before I installed the screen saver. After using the enclosed squeegee to remove the few air bubbles trapped under the screen, and carefully wiping the excess moisture from around the edges after the final squeegee, I placed the unit flat on a shelf in an area of the house that receives constant air circulation from the heating/cooling unit, and left it their for 24-hours (they say it can be handled after 8 hours or so, but I wanted to make sure it was securely attached. When it was time to begin using the unit, the screen saver looked like it was actually part of the device, it was crystal clear with no bubbles, yet the touch-screen device responded perfectly, so the screen protector didn't interfere at all with the sensitivity of the unit, needless to say, I was very pleased with the product. However, due to no fault of ArmorSuit, after trying to get the device to load mapping software, it was determined the device itself was defective so I was asked to return the unit. Even though ArmorSuit states the screen protector can be removed and repositioned as necessary, I was very nervous about peeling off their product. I was able to remove the product, but I was actually surprised at how well (i.e. firm) the protector was attached to the screen. I needed to use an appropriate amount of force to remove it, but it made me feel very confident about how well their protector had "bonded" to my device. My fears about it prematurely peeling away from the screen were eased. and I felt their product would provide the protection they advertised. My defective unit will be replaced with a different model, so I won't be able to reuse the first screen protector I purchased, but I will definitely purchase one for the new model devise when it arrives.

Some of the negative reviews here are a bit confusing. I'm writing this one primarily to set a few records straight. First of all, these screen protectors are stickers. They're thin plastic. Their purpose is to add a layer of cheap material over your expensive glass screen in order to prevent scuffs, scratches, chips, etc. The reason you get six in the package is that these are not supposed to be durable! They're expendable and disposable. You use one until it wears out, then you use another. Second, installation is an absolute breeze. I've used lots of these sorts of products for my devices over the years and this one had one of the easiest installations I've ever done. Anyone who is complaining that it took them four tries or whatever, didn't bother actually watching the installation video. The protector also wraps around the curvature of the Versa 2 just fine. Again, you need to watch the video and do it at the right time. I recommend watching both the watch video and the "curved device" video as you'll get tips in each. Here's a quick run-down of how to properly install: - First of all, you need a dust-free area. A good tip for this is to use your bathroom, immediately after a shower. The water vapor will drag a lot of the dust out of the air. - Second, make sure your hands are clean and oil-free. See the shower tip. - Next, use scissors and cut out one protector -- you'll be spraying it with a bunch of liquid and there's no reason to get the adjacent ones wet. - Now spray the watch face with the included solution. One spray seems to be sufficient here. - Now spray the fingers on both of your hands. Don't worry, the solution doesn't smell especially bad. - Now spray the front of the protector. - Now use your wet fingers and peel up the protector and liberally spray the back. - Finally, put the protector in place on the watch. Slide it around a bit into position. Hold half of it in place with your thumb and squeegee the liquid out from the other half. The protector will shift a bit. Gently push it back into place. Then hold and squeegee again, in a different direction. (I alternate Up-Right-Down-Left when doing this so I get equal coverage.) - Keep repeating the above step until the protector starts to stick to the watch. Then give it a couple of final swipes with the squeegee. - The curved edges will not be in place at this point. That's okay! Put the watch down and walk away for 15 minutes. - Now come back and using the microfiber cloth gently polish/press the protector, from the middle outward, all the way into the curved edges. They'll stick. Push them evenly around the face of the watch and all will be great. - And finally, wait 8 hours. Come back and give the edges another little pass if you need to. I'm deducting one star primarily for that 8 hour wait. I've never had to do that before. The installation instructions mention a hair dryer for quicker drying but they also mention simply doing this right before bed, and that seems to be an easier and perhaps better option. Once in place, the screen protector is crystal clear and doesn't interfere in any way with using your watch. Which is really all you can ask for. I'd like these to be ever-so-slightly wider. They don't quite cover the entire glass face of the watch. (They're short by maybe 1mm.) That's fine from a usability perspective and you can barely see it but I think a bit more edge-to-edge coverage would help improve snag resistance. These sorts of protectors, for me, always seem to wear out at the side because a bit of lint or dirt gets under the edge and destroys adhesion, so having the protector right up against the metal would help. Anyway, that's that. Easy install, great clarity, does what it's supposed to do. No real complaints except the 8 hour set time, but even that is not a very big deal. Good product.

Bought based on reviews but very disappointed. Installed as per install video but the screen protector doesn't adhere to curved screens well. Bought for my versa 2 and only got a week out of it before I had to put a new one on.

Fast shipping, easy to apply. Very pleased

It’s just a plastic…. It’s not staying on the watch

A worthwhile purchase. Provides good protection and completely covers the screen.

This was super easy to install. Its a wet install where you clean the watch screen first. Then apply the bubble solution to your fingers, wet the screen protector adhesive side with the soultion and then squeegee all the liquid and bubbles out. It comes with everything you need. Super easy to install. Similar to all wet TPU screen protector installs. The fit it perfect. Covers the entire screen. Super clean and clear. Even thought there is a bit of a convex part tot the screen, it didn't make any difference. A glass screen protector would have been an issue due to the venu 3s's screen having that littlebl bulge. It will provide scratch resistance similar to all TPU protectors. Any crazy snags or scratches will impact the screen protector likely. Will see how long these last. Comes with 6 screen protectors luckily. Thankfully these Garmin watches last many years, so if I do run out, I do suspect that the lifetime warranty can kick it. I would not hesitate to buy this again. Don't waste your time with all those random made in china garbage screen protectors.