F360 RGB Core - 360mm Single-Frame RGB Fan Unit - White

I installed the NZXT F420 RGB Core as a front intake upgrade, and overall it has been a very positive addition to my system. The single-frame design is the biggest advantage. Installation is significantly easier than mounting three separate fans, and cable management is much cleaner with fewer connections to route and hide. This alone makes it feel more premium and builder-friendly, especially in a glass-panel case where aesthetics matter. Cooling performance is solid. The fans move a lot of air and handle restricted airflow well, which helps keep system temperatures stable under load. At lower and mid RPMs they remain fairly quiet, and while they are audible at higher speeds, the noise level is reasonable given the airflow output. The RGB lighting looks excellent. The illumination is bright, smooth, and evenly diffused through the blades, giving the system a polished, high-end appearance. RGB synchronization through NZXT CAM or motherboard ARGB headers works reliably and is easy to configure. Build quality feels robust, with no rattling or vibration once mounted. The frame and fans feel well-constructed and consistent with NZXT’s overall design language. The only real downside is compatibility—you need a case that supports a 420 mm single-frame fan mount, which limits options. It’s also more expensive than standard fans, but the convenience, looks, and performance help justify the cost. Overall, the NZXT F420 RGB Core is an excellent choice for builders who want strong airflow, clean cable management, and standout RGB in one integrated unit. Highly recommended for compatible cases.

Took some setting up initially but was essentially just plug and play. The RGB looks nice and works nice and its improved airflow in my case significantly improving the airflow with little to no noise level. I find this to be excellent value for money and would highly recommend.

I bought these NZXT F240 RGB fans at the same time as the NZXT H5 Flow case which came with a triple fan installed. I have had a couple of NZXT cases but this is the first time using their fans. I am familiar with the NZXT CAM software and both sets of fans were picked up easily, what I like about these is how easy they are to install over single fans. Using the software you can adjust the brightness and colour, there are a number of preset effects too that will suite most people's preferences. What I do like is the ability to customise the speed of the fans in the software and ultimately the noise of them. At top speed they are noticeable, but when paired with the H5 case I do not need to set them higher than 50% as the air flow is so good. Under workload or gaming I am seeing about 10 degree Celsius drop in temps compared to my last case and fans, cpu cooler is the same. I think for the build quality and price these are excellent value for money.

Really smart! These fans are easy to use and with 1 cable for 3 fans, great for cable management. They look neat and perform with great airflow. I got this to replace my aio cooler fans so it matches the others that came in my case. I have a recess in the bottom of my case to fit these in but can see if you have a case with bottom mounted fans this style will really clean up the look. Nice and quiet too.

NZXT make quality components and this fan array is no exception. It's solid, well made and works as advertised. It's not noisy and shifts a good amount of air at all speeds. The three 120mm fans are RGB LED enabled so depending on how you connect to your motherboard can be set to the illumination you want. Having only one each of fan-header and LED header connectors means less cable clutter. There are rubber pads at each mounting point to help dampen any possible vibration and the mounting screws are provided. A highly recommended item. However I purchased an Amazon Return/Resale "Used - As New" item: the screws were missing and the fan cable was stuffed into the box with zero care twisting it nastily all over the place. Luckily this hadn't cut the cable and I had some spare screws to hand.

Excellent concept from NZXT, these fans are superb in every way. The fans cannot be daisy linked but they only have 1 cable/connector which will plug into the new hubs when available, for now NZXT have supplied an adapter cable so you can use an existing NZXT hub or plug them direct into the motherboard. The RGB can be controlled with the NZXT Cam software or your motherboards own software if you’ve connected them to a 5v ARGB port. Really rich and vibrant colours from the RGB lights, an all round excellent designed and performing fan. My only quibble is they are a little noisy at their maximum speed.

Good 👍🏻

This unit gives a much cleaner look than 3 separate 120 fans. Shame that this sleek look can be a bit spoilt by the big black ugly mounting screws supplied. These can be swapped out though if you have something better to hand. The RGB lighting is really nice, and effects such as "spectrum" spread nicely which each fan moving through different parts of the... well spectrum. The RGB works connected to the aRGB header on motherboard no problem. The fan power and control is not so good. When connected to a fan header, this unit just wouldn't pull through power for the third fan, which would often jutter or not spin at all, even at 100% setting. So this unit can only really work when connected to a NZXT Fan Controller. I have a NZXT Kraken CPU Cooler and it works OK with this but not if the fan is connected direct to motherboard. This means no fan control at BIOS and can only be done using NZXT CAM. Full fan control from BIOS would be so much better. Despite it's limitations I am happy with the product. It works for me as I already have NZXT Kraken. If I didn't have that I would have sent it back. It would be nice if NZXT would release this product line in a Reverse Fan configuration as well. Most of us these days use exhibition cases and pull air using fans inside the enclosure. Yes this unit can be reverse mounted but then the LED effects are a bit ruined and the PCB backboard and bare LEDs are too visible.

F/p ürün, malzeme kalitesi iyi, ses seviyesi iyi, rgb fena değil.

اصليه وجودتها من الفئات العاليه وليست مثل الرخيصه تجيك المروحه من مقاس مروحتين او ثلاث وبمخرج سلك مدمج.. يعني بيريحك فالتركيب وطوله يكفي بالراحة فيها تقنيات متقدمه تطيل من عمر المراوح ومكتوب ٦٠،٠٠٠ الف ساعة تشغيل يعني لو ٨ ساعات باليوم.. بتعيش معاك ٢٠ سنه 😅 خدها وبالك مرتاح من ناحية الجودة بس الشكل والحجم هذا اختيار بحسب ذوقك

Prodotto ottimo, ben imballato e di facile installazione, molto bello e molto silenzioso, lo consiglio.

Bevalt erg goed.

1. **Design und Ästhetik:** - Der F360 RGB Lüfter besticht durch sein attraktives Design und die integrierte RGB-Beleuchtung. Die Beleuchtung kann in verschiedenen Farben und Effekten angepasst werden, was zur visuellen Attraktivität des Systems beiträgt. - Die RGB-LEDs sind hell und gleichmäßig verteilt, wodurch der Lüfter ein auffälliges Element im PC-Gehäuse wird. 2. **Kühlleistung:** - Der F360 RGB Lüfter bietet eine solide Kühlleistung und ist in der Lage, eine beträchtliche Menge an Luft zu bewegen, was zur effektiven Wärmeabfuhr beiträgt. - Er eignet sich gut für den Einsatz in Kombination mit Radiatoren oder als Gehäuselüfter, um die allgemeine Luftzirkulation im System zu verbessern. 3. **Geräuschpegel:** - Einer der Vorteile des F360 RGB Lüfters ist sein leiser Betrieb. Selbst bei höheren Drehzahlen bleibt der Lüfter relativ leise, was ihn ideal für Benutzer macht, die ein ruhiges System bevorzugen. - Die Geräuschpegel sind niedrig, ohne die Kühlleistung zu beeinträchtigen, was zu einem ausgewogenen Betrieb führt. 4. **Installation:** - Die Installation der F360 RGB Lüfter ist einfach und unkompliziert. Die Lüfter werden mit allen notwendigen Befestigungsmaterialien geliefert und sind kompatibel mit den meisten PC-Gehäusen. - Die Integration der RGB-Beleuchtung erfordert jedoch eine Verbindung zu einem RGB-Controller oder einem kompatiblen Mainboard, was je nach Systemkonfiguration variieren kann. 5. **Software und Steuerung:** - Die NZXT CAM-Software ermöglicht eine umfassende Steuerung der RGB-Beleuchtung und der Lüftergeschwindigkeit. Benutzer können individuelle Beleuchtungsprofile erstellen und die Leistung an ihre Bedürfnisse anpassen. 6. **Preis:** - Die F360 RGB Lüfter sind im höheren Preissegment angesiedelt, was angesichts der Qualität, der RGB-Funktionalität und der Leistung gerechtfertigt ist. - Sie bieten ein gutes Preis-Leistungs-Verhältnis für Benutzer, die Wert auf Ästhetik und leise Kühlung legen. **Zusammenfassung:** Die NZXT F360 RGB Lüfter sind eine ausgezeichnete Wahl für Benutzer, die ihr System sowohl ästhetisch aufwerten als auch eine effiziente und leise Kühlung sicherstellen möchten. Sie bieten eine starke Kühlleistung, eine ansprechende RGB-Beleuchtung und sind einfach zu installieren. Die NZXT CAM-Software ermöglicht eine einfache Anpassung und Steuerung. Der höhere Preis ist durch die Qualität und die gebotenen Funktionen gerechtfertigt.