SUPCASE for Samsung Galaxy Z Fold 6 Case with S Pen Holder, Black | Built-in Screen Protector, Kickstand, Military-Grade Drop Protection, Full-Body Rugged, Unicorn Beetle Pro

This is a awesome case. Stays flat when opened. The hinge is optimized for for the S pen. The fit is well designed. The overal review, very durable and definitely worth the money.

The quality on this case is FAR BEYOND the fold 5's case. I also have that one and they basically had just rebranded the case for the Fold 4 and added this weird silicon sleeve for the Spen. It was a study enough case, but felt really awkward with the silicon and the not-quite-perfect fit on the 5. They also didn't manufacture all the colors for whatever reason. I wanted the green, but ended up with black because that's just all they had. This case was actually designed for the 6. The spen slot doesn't need an extra silicon sleeve, it just fits perfectly, and the tempered glass screen protector on the front is absolutely the way to go with these cases. It's so much better than the strange plastic last gen's case had. And I got my green! In all, if you have a fold 6, THIS is the case you want. My phone went straight from the box into this case and when I'm ready to trade it in for the 7 or 8, it will come back out of this case looking like it was never even touched. Love these UB cases. I hope they keep going with this design and quality. They will have a customer for life if they do.

After 1.5 yrs in use the hinges broke off . Other than that good case

Easy to install, no tape needed, great build quality, phone is secure, raised edges, great screen protection, feels good in the hands, slim S pen Fold Edition fits in side ways not flat. A few minor gripes, even with tough sensitivity on I still have to tap a little harder sometimes, the case creates a little more gap but I think this is going to happen with most cases that has raised edges on the inside to protect the phone when unfolded. No protection for the volume and usbc port, not a huge deal just always had a case that also protected those two areas for my previous phones

This case is an awesome product, right up to the point that you open it up. It's a breeze to put on your Fold-6. The case comes with a Front cover which is a screen protector and a rear cover, which has the "hinge protector" attached to it. Along with that the rear cover also has a bracket attached so you can "stand" your phone up, and also a cut-out for your camera lens. Starting with the hinge "protector" which covers the entire hinge of your device. When you have your phone closed it works great, and when you open your phone the protector remains in place. The issue with this is two-fold, one being that the thickness of the hinge protector gets in the way if you want to use the "bracket-stand" to stand your phone up. Because of this hinge protector there is only one way you are able to "stand" your phone up. The only way you can use the bracket to "stand" your phone up is in the "landscape mode" or sideways, due to the thickness of the hinge protector that gets in the way if you attempt to use the bracket to stand your phone up in "portrait mode" or straight up. The other issue is that when you have your phone open, as I said earlier, yes the hinge protector stays in place, but when you close your phone the hinge protector, doesn't close with it. Now, in the grand scheme of things, this is just one of those aggravating items that over time get you to start looking in other directions. Still on the hinge protector, it has a space for your S-pen, unfortunately there is only one size pen that will fit it. The ONLY size that will fit in this slot is the size of pens that came with the previous Fold edition phones, the Fold-4 and Fold-5. Since the Fold-6 DOESN'T come with an S-pen you'll have to purchase the pen separately. I found this to be a bit harder then you'd think. I attempted to look around for this exact size pen and it seemed that every S-Pen was either longer and/or thicker. Other than that I can't comment on how it remains in place within the hinge. It is hidden though, so there's that. The back cover also has a cut-out for the three camera Lenses and the flash. It doesn't have any type of covering for the lenses and flash, just the cut-out. The front cover comes with a screen protector. I've had not issues when using the fingerprint lock. Just to be safe, I turned up the sensitivity and still no issues when it comes to using my fingerprint. As far as placement of the cover is concerned, it is placed the same way of any other cover of a "Fold edition" device. I still followed the directions of the manufacturer when placing the cover. The only "stumbling block" I had was in the directions it talks about pressing the cover firmly so the stickers would hold firmly, or something along those lines. Anyhow, there are no stickers on the inside of the front cover. Over all, except for a few minor annoyances this cover isn't bad. It protects what it's supposed to, even though a few of the "bells & whistles" aren't up to par. Is it worth the amount that is being charged? Well, that's up to you. I've had the case now since the 22nd of July and I do know that it's time to look at other cases.

Horrible quality! it broke in less than a month of having it on my phone and only dropping a couple times. The only good part is the screen on the front isn't shattered and works great when using the front screen other than that the case is garbage

My hinge partially disconnected from the case. I contacted Supcase and I am waiting for a response. I have been purchasing cases from Supcase for many years and have always been satisfied with my purchase. I came back to put additional comments because SUPCASE replaced my defective case for free without a problem. You can feel confident that they stand behind their products. I have always purchased this brand and always satisfied.

Love the red color. Not a fan of the stand only being able to be used one way. I do have issues with using the right side of the front screen with the protector, I changed to the required settings but it didn't help. Tempered glass doesn't seem tempered. I would not recommend this case and will be sending it back.

The screen protector for the front of the phone is too far away from the screen. The edges of the screen cannot be used at all and the rest of the screen takes effort to use. Totally useless for the front screen.

La coque est bien le contact ecran est bien mais le stylet de tient pas en place dans le logement

I HAVE WASTED A LOT OF TIME AND MONEY SEARCHING FOR THE PERFECT CASE FOR THE Z FOLD 6 PHONE AND I HAVE COME TO THE CONCLUSION THAT ONE DOSE NOT EXIST. THIS CASE COMES MIGHTY DAMN CLOSE THOUGH AND IS A LOT BETTER THAN ANY OTHERS I HAVE TRIED....WAY, WAY BETTER INFACT! THE DESIGN OF THE PHONE IS SUCH THAT ENGINEERING A CASE FOR IT IS EXTREMELY PROBLEMATIC. I HAVE PURCHASED AND LOOKED AT SEVERAL CASES OVER THE PAST MONTH OR SO ...THIN ONES , THICK ONES ETC...BUT ALL SEEM TO HAVE A PROBLEM WITH THE COVERAGE OF THE FRONT SCREEN AREA....PARTICULARLY THE LEFT SIDE UP AGAINST THE HINGE AREA WHICH IS USUALLY A VERY THIN BIT OF FLIMSY PLASTIC HELD ON WITH A THIN ADHESIVE STRIP WHICH BENDS AND PULLS AWAY FROM THE SCREEN ALL TOO EASILY. THE SUP UB PRO CASE IS ON THE MORE EXPENSIVE SIDE FOR A CASE AT JUST OVER £50 CURRENTLY ALTHOUGH IT IS OFTEN DISCOUNTED DOWN TO AROUND £30. ON AMAZON AT LEAST ANYWAY. IT IS ALSO ON THE THICKER SIDE FOR A CASE BUT THIS DOES AFFORD REALLY EXCELLENT SOLID PROTECTION FOR THE Z FOLD 6....WHICH ALTHOUGH A DESIGN MARVEL IS ALSO A FAIRLY DELICATE BEAST! IT DOES GIVE YOU PEACE OF MIND THAT IF YOU DID HAPPEN TO DROP THE PHONE IT WOULD SURVIVE FAIRLY WELL UNSCATHED! IT FITS THE Z FOLD 6 LIKE A GLOVE AND GIVES WONDERFUL PROTECTION IN ALL THE RIGHT PLACES TOO. THE REAL BONUS WITH THIS CASE HOWEVER IS THAT THE FRONT SCREEN IS A COMPLETE TEMPERED GLASS COVER WITH A HARD PLASTIC SURROUNDING WHICH IS NOT FLIMSY AT ALL BUT SOLID AS A ROCK ON THE FRONT OF THE PHONE. AND...WONDER OF WONDERS...THERE IS NOT AN ADHESIVE STRIP IN SIGHT!....THE CASE FITS THE PHONE PERFECTLY AND TIGHTLY WITHOUT THE NEED FOR THEM, WHICH IS ONE OF THE MAIN REASONS WHY I LIKE THIS CASE SO MUCH. IT NEVER FEELS LOOSE OR LIKE IT IS GOING TO PULL OFF EASILY WHEN YOU ARE USING THE PHONE BUT BECAUSE THERE IS NO STICKY GLUE INVOLVED IT MAKES REMOVING THE CASE A BREEZE SHOULD YOU NEED TO FOR ANY REASON. ITS WORTH THE PRICE FOR THAT REASON ALONE IN MY OPINION. THAT AND THE SOLID GLASS FRONT COVER ANYWAY. THE REAR OF THE PHONE IS COVERED BY A VERY INDUSTRIAL LOOKING SHINY METALLIC PLASTIC IN A VARIETY OF COLOUR OPTIONS . I CHOSE THE TILT VARIATION WHICH APPEALED TO ME THE MOST..... IT IS A LIGHT BLUE SILVERY COLOUR AND REALLY DOES LOOK NICE. THE LITTLE KICK STAND IS AN ADDED BONUS WHICH LOCKS INTO PLACE WITH A FIRM CLICK AND CAN SUPPORT THE PHONE IN VARIOUS POSITIONS. SOME REVIEWERS HAVE COMMENTED ON THE WEAK HOLDING CLIPS IN THE HINGE WHICH SECURES THE S PEN SHOULD YOU WANT TO USE THAT... HOWEVER I CANT COMMENT ON THAT ASPECT OF THE CASE AS I DONT USE THE HINGE FOR THAT PURPOSE. I CARRY MY S PEN IN ITS OWN LITTLE PLASTIC TUBE...AND ITS ONE OF THE FATTER ONES TOO SO IT DOSNT FIT IN THIS CASES HINGE ANYWAY. HOWEVER THE HINGE ITSELF IS ANOTHER BRILLIANT BIT OF DESIGN WHICH PROTECTS THE Z FOLD 6's OWN HINGE VERY WELL. IT ALSO HAS A VERY SATISFYING SNAP CLICK WHEN IT CLOSES AND IS NOT SPRING LOADED WHICH MAKES IT ULTIMATELY STRONGER IN THE LONG RUN AND NOT A POTENTIAL WEAK POINT FURTHER DOWN THE ROAD. PLUS WHEN THE PHONE IS FULLY OPEN THE HINGE GIVES A GOOD HOLDING POINT ON THE BACK OF THE PHONE TOO. IT ALSO HAS A CUT OUT OPENING IN THE MIDDLE ( I HAVE INCLUDED A PHOTO SHOWING THIS ) DESIGNED TO PUSH YOUR S PEN OUT BUT IT HAPPENS TO FIT YOUR THUMB OR FINGER PERFECTLY WHEN YOU ARE HOLDING THE PHONE WHEN IT IS CLOSED AND YOU ARE USING THE FRONT SCREEN. AND FINALLY , THIS CASE GIVES THE BEST POSSIBLE PROTECTION FOR THE LENS ARRAY THAT I HAVE EXPERIENCED. IT IS RAISED WELL ABOVE THE LEVEL OF THE LENSES TO THE POINT WHERE YOU DONT NEED TO WORRY ABOUT SCRATCHING OR DAMAGING THEM IF THEY ARE FACE DOWN AGAIST A HARD SURFACE. ALL IN ALL THIS CASE IS SOMEWHAT OF AN ENGINEERING TRIUMPH AND I CANT RECOMMEND IT ENOUGH...WITH THE PROVISO THAT IT IS A SLIGHTLY MORE EXPENSIVE, THICKER AND MORE ROBUST OPTION....BUT THIS IN TURN DOES PROVIDE EXCELLENT OVERALL PROTECTION FOR THE PHONE.....PLUS IT LOOKS AND FEELS REALLY GOOD IN THE HAND. WORTH EVERY PENNY I WOULD SAY AS IT JUST WORKS .....UNLIKE SO MANY OTHERS FOR THE Z FOLD 6 I HAVE SEEN AND TRIED.. 5 STARS ALL THE WAY WITH THIS ONE! IF I COULD GIVE IT MORE I WOULD.

Received my Fold 6 phone case in perfect condition! Fits my phone perfectly. Well made and great grip handling. Provides great protection for my new phone!

Un producto de excelente calidad, me ha funcionado muy bien y ha protegido mi ZFold excelente, lo unico que no me gusta es que si traes en telefono en vibrador el soporte trasero hace un ruido no muy agradable