WGB32BM 3-Stage Whole House Water Filtration System w/ 20-Inch Big Blue Sediment, Carbon Block, and Iron & Manganese Reducing Filter

It doesn’t work…..

Just got it installed. Easy installation, leak free with the use of Teflon tape and pipe dope on the 1" NPT fittings. Unit appears to be well built, solid housing. Easy instructions to change inlet side. One thing I wish it had would be a built in pressure relief or fittings on the bottom of the housings to easily drain the water and pressure to aid in filter changes. Overall seems good, improved my water quality.

Molto grande pensavo era piccolo..complimenti Amazon..

iSpring whole house filter system We needed to replace an older oversized filter system for our well water. Based on the many positive reviews about iSpring we decided to give it a try. We did not regret it, on the contrary we were agreeably surprised with the quality of the products and excellent technical support. After a few phone calls and mail exchanges with the technicians, we got all the information needed for a successful system setup. It’s not so much about just buying any filter, but the right filters, combination, tailored for the specific application and water source. Worth to mention that the technical support staff was very knowledgeable, helpful and friendly. Based on their recommendations we installed : WSP jumbo spin down filter 100 microns, 3 stage filters sediment combo , iron manganese, heavy metals, plus an additional WDS 150K to reduce scale. This purified water goes into a reservoir tank 1100 gal and from the tank to an additional carbon block filter and the UV 55FS. Result: crystal clear water, no odor whatsoever, good in taste and much better than most of the bottled waters. The installation was no problem and everything worked flawless, no water leaks. However, only after a few weeks the UV lamp burned out and this failure was reported to iSpring. The problem was immediately solved by John from technical support, there was no need for lengthy explanation, he arranged to send us all the required parts a new ballast resistor/switch, a flow meter and wow even 2 replacement lamp’s. Replacement was easy and everything works perfect. The filters are now in use for more than ½ year and there is no pressure drop along the filters and the water is as pure as it can be. What more do you want? 5 stars and highly recommended.

This was my second purchase from Ispring. I have the 50micron spin down filter and the whole house filter system installed on my well water. The water is now clean and clear and does not have anymore metallic smell. The I like this system because it leaves the minerals in my water while removing what I want removed. It was also very easy to install. I am a plumber, but it would be easy enough for any DIYer. I needed an extra part for the system and Sean sent one to me promptly. Their customer service is great.

Follow-up on Aug 31, 2024 I decided to have my prefilter discharge to the outside so I asked Sean to send me an additional length of blue tubing and the connection fitting. He was nice enough to do this and all is working great. Now when I manually turn the discharge nob the flushing water goes outside my basement and onto the grass in my yard. No more carrying a 5-gal container filled with water outside to empty it. I did have a plastic fitting that snapped with the threads embedded in the brass discharge valve and fortunately Sean had sent two so I was lucky. I did ask for another to be sent to me just in case I have to disassemble the tubing again and I break the fitting. I must say…… iSpring’s customer service is tops. Anyone (especially Sean) I have communicated with always assists. Thanks to all! I installed the WGB32BM system along with the jumbo pre-filter WSP-J a week ago and all is great. The system works as advertised and my well water is now refreshingly clear, clean, odor-free and tasty. Many thanks to Sean and John for their patience with my questions and just generally their respect for the consumer. A couple of tips for those interested in this product… 1) Test your water using a reputable lab to make sure you know the water quality you’re working with and what specifically you need to address with regard to it. Make sure to test for lead too! I was a little elevated so I installed under sink filters as a separate measure. Retested and Pb levels could not be detected. 2) Carefully read the instruction booklet and watch the installation video(s) online (YouTube is a good place). 3) if your water inlet to the filters is left to right you will need to reverse the filter manifold bracket by removing the 12 bolts, turning the bracket 180 degrees and then reinstalling the bolts. 4) It is a good idea to attach a 3-4 foot section of a 2 x 6 piece of wood to the wall where the filters are to be mounted. This will bring the filters away from the wall enough to easily work with them when installing the housings and also in the future when replacing the filters. 5) Definitely install bypass piping with at least one shut off valve. Also not a bad idea to install a drain valve in-line before the filters and after the pressure tank. 6) Make sure to add pressure gauges inline before and after the filters. This will allow you to monitor filter flow and know when to replace them. 6) it is very important to put 15 wraps of plumbers tape on all fittings to be installed on the housing manifold. 7) It is also important to lightly coat the housing o-rings with plumber’s silicone grease before you install it. 8) After installation is complete let the water run for about 15 minutes before using. The water will be a little cloudy for a day or so but not to worry. Again, this is a great water filtration system so far as I can tell. Update 12 mos later… System continues to work wonderfully. I had a bit of a sulfur smell for 10 seconds in early AM at my MBR shower so I called and Sean recommended use of iSpring’s GAC-KDF filter on place of the Carbon filter. It worked, no more smell and I can tell other minerals or metals are being filtered from my well water too by the way my hair feels after a wash/rinse. Thanks to Sean and iSpring for selling great products and continuing to provide sage advice.