FLEXTAILGEAR Zero Pump 1.2 oz Portable Air Pump for Inflatables, Ultra Mini Electric air Pump Air Mattress Pump, Rechargeable Air Pump for Pool Floats Air Bed Air Mattress

La relación costo beneficio es muy alto , la bomba cumple medianamente lo que promete, la calidad de los accesorios es suficiente nada premium como lo esperaba por el costo y tantas reseñas positivas que hablan de la bomba , las utilicé con Klimyt y forzadamente cumplió su trabajo, 7.5 de calificación 🥲

Great quality product I bought this with the intention of getting fires started easily Cut a short bit of pipe and partially flattened one end to handle heat and fitted into one of the rubber attachments Works well for fires and it’s intended use blowing up mattresses and beach balls etc

超軽量でコンパクトなのでキャンプに毎回持っていく エアーピロー、エアーマットorインフレーターマットで使用 複数のアダプターもありがたい ネイチャーハイクのエアーマットはジャストのアダプターがあるが、格安エアーピローとプロモンテのインフレーターエアマットはアダプターが合わず、しかしゴム部分を押し付けて問題なく使用できている 多少値段はしたが結果購入して良かった 欲を言えばビーチボールや浮き輪などの形状に合う差し込みアダプターが付属していれば良かったが、無くても大満足している

It's a pricey little sucker but it works great with my Big Agnes sleeping mat and pillow. I love how small and light it is! The included instructions don't mention that the USB-C charging port is built-in to the battery. I could not find any mention of it in the booklet and had to google how to charge it. Also, the battery compartment cap threads feel very roughly machined. It's turned on by double-clicking a button that is flush with the housing and there doesn't seem to be a lockout so I would pack it within something soft so that it doesn't accidentally get turned on. Anyway, I would def buy it again.

My first thought was “Where have you been all my life”. After many years of blowing into sleeping pads, using the built-in hand pumps, or the giant stuff sacks that squeeze air into the pads … I have finally found a MUCH BETTER solution. The Flextail Zero Pump is astonishing! The entire carrying weight (pump + battery + adapter) is 2.15 ounces, and measures about 1” x 3”. The pump inflates all my pads in less than 90 seconds, deflates them in less time, and can inflate my largest sleeping pad 25 times on a single battery charge! And I found a great little plastic container on Amazon to safely pack the pump and one adapter when travelling (see below and pics). Details: The pump inflates my Large Thermarest NeoAir XLite NXT (largest size they make) in 80 seconds and deflates it in less than 60 seconds. That is getting the pad to a “hard inflation” – not soft or squishy. The pump inflates my Exped Synmat7 LW (Large Wide size) in 53 seconds (also “hard inflation”). It is not as good at deflating the Exped pad since the pad has built-in foam. But overall, I was stunned – it is fast and generates enough air to actually inflate the pads even past the point I would normally fill them. People complain about the noise of the pump – I think it’s not an issue. Yes – it runs at high speed and sounds a little like a dental drill. But it’s not as loud as normal speaking voice, and it’s only for 80 seconds. Adapters: The box comes with 6 different rubber adapters, designed to fit the pump on to many different sleeping pads. It was easy to find the adapters that fit my 2 pads, and the rubber adapters really created an airtight connection. Some folks complain they cannot find an adapter that fits their sleeping pad. But that’s why we order from Amazon – return it if it doesn’t work for you. Power: I ran the pump, beginning with a fully charged battery, until it ran out of power. That took 33 minutes. Based on that, I think I could inflate my Large NeoAir pad about 25 times. Surprisingly – this actually matches what Flextail states on their website 😊 Or inflate and deflate it 14 times. I could almost go for a month of backpacking if I only used this pump to inflate my sleeping pad. WOW! Note: you must double tap the power button to start the unit – which is a nice safety feature to prevent it turning on accidentally in your pack. Battery: The unit comes with a RCR123A battery that provides 650 mAh (or 2.41 Wh) of energy. The battery needs to be taken out of the pump to charge; the battery has a built-in USB-C port and can accept charging at 350 mA (which is so low, almost any charger will charge it). It took about 2 hours to charge the battery from 0% to 100%. The battery has 2 small LEDs on the top (“+” terminal) that glow red when it’s charging, and green when it’s charged (see pictures). The manual states you should not swap this battery for a regular “CR123” type of battery. I tested it with a CR123, and it ran fine. Seems to run a little slower – which makes sense since the CR123 is a 3.0V battery and the RCR123A is a 3.7V battery. Other Amazon reviewers also report it works fine with a CR123. If you want to stick with the RCR123A (I plan to), those batteries are not available everywhere, and this might be a problem on long through hikes if your battery hits its end of life. You can easily order another RCR123A (e.g. from Amazon) and obviously you can carry a spare. More interestingly, you can swap out the battery for another RCR123A with more power. Flextail sells a battery on their website with 900 mAh, Amazon sells 800 mAh, and there are batteries up to 950 mAh on the market. 900 mAh should give me 34 inflations on my NeoAir pad. Concerns: The case is made from thin aluminum. I worry that I could easily bash the case in my backpack – which could make it impossible to unscrew the case to charge the battery, or damage the pump housing. The solution is a 100ml Transparent Plastic Centrifuge Tube – which is big enough to hold the pump with one attached adapter (needs internal dimensions of 100mm x 32mm). See pictures. Total weight with pump, adapter, battery and centrifuge tube is 2.85 oz. A five pack of these tubes is about $7. (See https://www.amazon.com/Transparent-Plastic-Centrifuge-Graduated-Bottom/dp/B0C4TC59X3?pd_rd_w=qlLls&content-id=amzn1.sym.2fa40e00-e100-448a-9cac-99baa94dfabf&pf_rd_p=2fa40e00-e100-448a-9cac-99baa94dfabf&pf_rd_r=DKC7SPTYTJK1GQ6KR7VN&pd_rd_wg=cs1RM&pd_rd_r=0f772bdc-615a-4b3f-8870-926c3d0078c1&pd_rd_i=B0C4TC59X3&ref_=pd_bap_d_grid_rp_0_1_ec_pd_nav_hcs_rp_2_t&th=1) Because rubber can tear, I worry a little about the longevity of the rubber adapters. The ability to order extra rubber adapters would be nice. Lastly – old guy speaking - a larger manual with bigger print (manual pages are 2” x 3.25”) would be appreciated.