3M Scotch-Weld Plastic & Rubber Instant Adhesive PR40, Clear, 20 Gram Bottle

This adhesive worked great for my project which was to bond some 3D printed (PLA) items to polyethylene (HDPE). After 24 hours of curing the two items were bonded together as if they were one. There was a lot of surface area for the connection that I was bonding so perhaps my situation was optimal for this product but I couldn't be happier with the result. There's not a lot of instructions included, so it might be helpful to know how I used the product: - I started with both surfaces to be bonded in a horizontal position. The adhesive (and the primer are very thin and runny and this is the only way to minimize the mess. - I masked off the non-bonding areas with blue painters tape to further reduce mess. - I first primed the pieces by brushing the entire (cleaned) area for be bonded with acetone. Acetone is cheap and I had some (from Home Depot) so I decided to try it as an alternative to the expensive but official 3M primer. - I applied a thin layer of adhesive to the HDPE side, spreading it about a bit with a wooden stir stick. - I joined the pieces, clamped them together and carefully wiped away the excess with a paper towel. Note that the bonding is not immediate. Out of an abundance of caution I left the clamps on for 24 hours. Maybe another process would work as well, but that worked great for me. You end up using a very small amount of adhesive so the little bottle goes farther than you might think. To be honest I had serious doubts that anything would work to bond HDPE, and was amazed at how well it ended up working. Good luck!

Very impressive bonding specially rubber to rubber applications. And dries fairly quickly on its own but fastest with a CA activator.

Works great but is a little costly

If you’re looking for a durable, clear, fairly quick drying glue this is it. It’s like rock solid when it dries. We’re obsessed with it and have ordered it many times. It’s super easy to use and you can use it on so many different things

After a lot of research I bought this glue to repair some tennis shoe soles that had started to come loose. I looked at lots of glues - instant, contact, two-part, etc., and eventually landed on this one. It is one of the more expensive adhesives, and it comes in a very plain, industrial-looking plastic container, no animals, colors or pretty pictures on the bottle, and in a plain cellophane wrap, but does it work? You bet it does. I can't quite believe the level of bond I got on rubber to rubber, it's amazing. There is absolutely no give, no sign of the edge coming loose again, it's very solid. At the price, I can see why you'd have reservations, so go ahead buy a cheaper one and be frustrated when it's not quite as good as you need. Then buy this one. I've been there. I write some reviews but not many, however this product got my attention and if you want something that works, get your wallet out, but this works. One more important "health and safety" thing. The small-print is *small* - it's really tiny, I used a loupe to read it. But definitely read it. My inner five year old came out and I smelled the glue while it was wet. REALLY BAD IDEA. Don't do that. It doesn't just smell bad, it smells dangerous. It made me physically recoil and it took a while for the weird feeling in my nose to go away, so don't smell it, and keep the product locked away from the wee ones. That's all. Great glue, easily worth the money.

It does the job very well! Very pleased

Delivered without any type of seal and half empty.

Exelente producto

Works great for nitrile o-ring cord

Compré este producto para unir una pieza rota de plástico, yo ya había tratado de utilizar kola loca y no me funcionó, pensé que esto tampoco funcionaría porque huele igual que la kola loca, pero lo dejé secar dos dias y al revisar la pieza estaba bien unida, así que si funciona, solo queda un poco de mancha opaca al secar el pegamento, definitivamente es más potente que otros pegamentos, hay que tener paciencia, poner suficiente producto y dejar secar sin mover por varias horas

Excelente producto, es necesario dejarlo secar por unas horas y si se deja más de 12 alcanza su máximo desempeño. Hasta ahora lo he usado en plásticos y considero que mucho mejor que la Kolaloca , como siempre 3M es excelente en sus productos

Worked excellent for my project

No funcionó para lo que la requeri.