SWM402

These wall mounts are great and easy to install. I have a wierd configuration for my living room tv area, I have 75 inch tv that’s kiddy cornered with a sectional in a pretty small area and these wall mounts were great for adjusting the direction of the rear surround sound speakers. And the price is unbeatable, great product and value!

So easy to install. Look great. Extremely easy to adjust the position of the speaker after they are hung. A very high quality functional product.

First off I'd like to say that if you are getting these for standard speakers you will need to get 1/2" long 1/4-20 thread sized screws as that is the standard size for most any speakers that these will hold. I have 3 sets of theater speakers and they are all different. I have a logitech system on my pc, then a klipsch speaker system in our main livingroom and a Polk system in our kids livingroom all of which take this size screw as have other systems I've had over the years. I've ordered 2 sets of the 4 pair sets and have ordered correct sized screws. I believe I'll have to drill open a bit for the larger screws to fit. Eye balling the holes from the mounts and screw holes in the speakers it does appear to be just a tad to small. Not a huge issue but just strikes me as odd the would say the include kit with all you need when infact it's not. They should include the standard screw size along with the smallers ones. Overall I'm happy with the build quality at this time they seem sturdy enough for my use and most people with speakers up to 7 pounds. I also love the apparent ease of installation by way of a removable plate the you fix to the surface then slide and screw in to locking the speaker mount. The movable range also should be sufficient for most installs and positions.

The mounts are sturdy and functional, a great value for money. Unfortunately, for those with Logitech Z906, you will have to drill a new hole about an inch below the lower hole in each mount, so that the bottom part of the mount surface doesn't block the speaker connectors, thus allowing you to fit the wires through. This workaround is relatively easy to perform on the four corner sattelite speakers, but the central speaker was a bit of a hassle, as it's placed horizontally, and the distance between the wall mounting hole and the connectors is shorter than the other four speakers. What I did was, I placed the mount surface on the speaker, secured it with the screw, but not too tight. Then I turned the speaker vertically to expose the connectors, fit the wires, held them against the speaker surface with some electrical tape, and carefully twisted the speaker and mount back to its original position. It wasn't easy, but I managed. I'm still wondering why Logitech didn't include wall mounts or at least sponsor a wall mount company to produce specific Z906 wall mounts. I also own the Logitech Z5500, which came stock with the mounts, which unfortunately are not compatible with the Z906 speakers.

Perfect! Super easy install. Very good range of motion and the bolt holds in place well. No complaints at all.

These are great mounts I use them for my rear satellite speakers on my surround sound system. This kit includes a few different screws for mounting to the speakers themselves but DOES NOT HAVE ANY M4 SCREWS. Luckily my system came with screws for mounting. The wall bracket is made of metal but the mounts themselves are plastic. If you have heavy speakers id prob look for something all metal but for smaller to medium size speakers these work great.

I've moved these 3 different times, they're easy to install and do a good job. Adjusting them is a little odd and cheap feeling, and the mount kinda blocks the wires, but I'm still very satisfied with my purchase. It's a good value.

I used these to mount my large (24"x15"x13", 47 pounds/each) vintage bookshelf speakers. The mount is quite secure on the wall. However, the mount was not robust enough otherwise - I was able to get the speaker to stand upright and straight, but the slightest touch made it wobble. With any forward tilt at all the speaker lifted out of the clamp dangerously. It was disappointing but not unexpected with this design and such a large speaker. Other reviewers have noted that there are screw holes, but I don't think you should have to put holes in the finish to get a solid mount. Also, it was so wiggly that simply securing the speaker to the mount would not be that much of an improvement. To get the mount to work, I put a screw eye in the wall and in the upper rear panel of the speaker, and ran a thin chain with S hooks to stabilize it. With that modification the mounts worked for my purpose. Even though I wasn't too happy with these out of the box, there is no other solution I could find for a tilting pivoting speaker mount, so to that extent I am satisfied. Also on the plus side they were inexpensive and would have worked very well for a smaller speaker, they arrived quickly, and they were a quality build with very simple assembly. To the manufacturer: You may want to revise your capacity ratings, or perhaps include the screw eyes/chain/S hooks or some other reinforcement in the kit.

Los soportes tienen buena calidad se sienten sólidos, los compre para poner las bocinas satelitales logitech z906. 1. Se tiene que hacer otro barreno para que no pegue con la entrada de los cables con una broca de 1/4 queda perfecto. 2. Para poder instalar las bocinas se requiere otro tornillo un poco más grande.(en cualquier tornilleria los encuentras) 3. Agregue otros taquetes más robustos de 1/4 para sostener los soportes. Ya que los que te envían son muy frajiles. Haciendo estas pequeñas modificaciones los soportes quedan perfectos para las bocinas Logitech modelo z906.

Great

غير متوافق مع سوني بحكم عدم وجود مكان للتثبيت في السماعة. استخدنة لازق دبل فيس لتثبيت السماعات

Verwende die Wandhalterungen für meine Samsung Surround Boxen meiner HW-Q995 Soundbar. Passen dafür ausgezeichnet und halten die Boxen sicher an der Wand

first off, i did not use the supplied wall anchors. i used a couple of 75lbs rated anchors - yes, i understand this is completely overkill. very easy to install. i mounted my rear speakers which were right at the weight limit and i noticed that after tightening the mount, and letting go of the speaker, the unit would sag a bit, but other than that, they've held up just fine. the range of motion is perfectly fine, and as long as my kids don't actually step up onto the speakers, i can foresee them staying put forever to be honest. what i also like about them is they're small and discreet unlike some gigantic mounts