- Resiners Resin Bubble Remover, 10 Min Remove Bubbles, 95kPa Vacuum Degassing Chamber, Compact Airless Lite Machine for Epoxy Molds Casting,UV Resin,Silicone,Jewelry Making (Patented)

I got this to replace my old Airless machine that I got 2 years ago and worked great until someone else knocked it off of the counter and broke it. If you are considering this Airless Lite machine, don't consider anymore. Order it. Now. Go on....... do it. This sleek and attractive little powerhouse is exactly what you need and nothing that you don't. No big huge bells and whistles or confusing displays. Just an on/off button, a plug and an pressure relief valve. It works BEAUTIFULLY. Its the perfect size for the average 8 ounce plastic mixing cup. On 1:1 epoxy it works within 5-7 minutes. Deep Pour takes virtually no time at all since it is so thin. If you are using Fast Cure resin, this is not going to remove bubbles as fast as, or as efficiently as 1:1 or Deep Pour. DO NOT expect it to. Fast Cure is EXTREMELY viscous, and the thickness slows down the bubble remover exponentially. If you try to debubble Fast Cure, it will take AT LEAST 2 cycles of 10 minutes each, and even then it won't remove all of the bubbles because of the resin consistency. That being said, even large commercial vacuum chambers have issues debubbling Fast Cure resin. This machine is very well made and can go on darn near any surface. Low noise, which is great. It is a bit louder when it first starts up, due to creating the vacuum, but once it reaches the max, it quiets down. TLDR: This is a great machine that I HIGHLY recommend for home resin crafters or even small businesses.

Very pleased how well the device worked. Efficient and easy to use. The results were epoxy resin castings that were crystal clear. I highly recommend this device.

I was very skeptical about buying this product. I watched several different videos on YouTube that were reviews of this bubble remover. I read a lot of reviews on here and other sites. I figured I didn’t have anything to lose. I would give it a try and if I didn’t like it, I would return it. But it worked excellently!! I took a time lapsed video where you can see the bubbles being removed. And even though there are a few bubbles at the very top as soon as the pressure releases those bubbles disappear any other bubbles that are still remaining at the very top are very easily removed. This alleviated all of the micro bubbles that I would get in my resin. I love this machine. I’m so glad I bought it. I’ve used about a dozen times now. Edited to add that resin temperature affects the bubbles removed. If you don’t warm it before mixing, it will take longer. But it still works great!

Update: I was contacted by the company after leaving the original review, and they provided me with excellent customer service and offered some solutions. I went ahead and tried another type of Resin and had better results. As a side note, I saw a YouTube video in which a gentleman said that it is okay to add dyes before putting the resin in the machine, but I would not recommend putting in mica powder first as it got very hot and cured very quickly. It is best to add the Mica powder after running the resin through the machine. Also, I heard a theory that using a larger, wider container in the machine will give you more surface area, which can help release bubbles rather than a single, deeper cup, but I tested this theory and still got a huge amount of micro bubbles even with the larger wider silicone cup using my usual Art Resin. Another alternative is, once you measure the amount of resin in a bigger cup, transfer the contents to four separate silicone cups, and put them all in at once. I will be continuing to work with this machine and will update this listing review after trying some different methods and different resins. I have added two stars to my original review, one for the excellent customer service that I received and also because this machine does work well to reduce bubbles in silicone and when working with certain resins. As a side note, Art Resin is not meant to be spread thicker than 1/8" according to their web site, and so perhaps its thickness is not letting the micro bubbles escape even when at the top. Today I put 200 mg of Art Resin through three cycles and lost 20 minutes of work time. It did not remove many of the micro bubbles after three cycles, and my project started curing before I was done working with it, and so I probably won't be using Art Resin anymore when a project is going to take some time to do. I will update this after trying the machine with a different resin. Original Review: I was excited to use this given some other reviews, but it didn't work for me. As others have mentioned, it might not work well for Art Resin, which is the only Resin that I use due to its high resistance to yellowing rating. I tried it with both plastic cups and silicone cups. I tried it only with Art Resin. I tried it over and over again, using the 5-minute setting and 9-minute setting and sometimes two or three times in a row. I always seem to get a huge amount of micro bubbles, most of which float to the top like a glass of beer. About half are popped when I open the valve or perhaps they just sink back into the mixture. The ones that remain don't seem to pop on their own, and only the ones at the surface will pop with flame. The non surface ones take a long time to come to the surface if they come up at all. I think what is happening is the machine is breaking the larger bubbles and transforming them into mini bubbles. I would rather have 100 larger bubbles than 1000 mini bubbles because at least the larger bubbles come to the surface where I can put a flame to them.

Another great product from Resiners, after seeing Ben's Worx using one on his YouTube channel I had to buy one. The bubble remover fits perfect on my work table and is not that noisy, very easy to use and really does bring the air bubbles out of resin. The build seems good quality and I believe it will last a long time. I got it at a good price aswell.

I've been using the vacuum chamber for a couple of months and I'm really happy with the results. It works best on medium and low viscosity casting resins. Doesn't work with high viscosity resin which are too thick to pour into moulds anyway. I'm quite impressed with how well it removes bubbles. It's definitely worth spending the money on if you pour a lot of small-medium size pieces.

It removes alot of the bubbles, but not all of them which results in having to use it twice and then it's hard to work with the resin

Stra consigliato per chi come me fa lavoretti fai da te con Resine epossidiche o comunque sia liquidi nei quali non vuoi avere bolle d'aria al suo interno. Rimuove l'aria in modo impeccabile, facile da usare e non impiega tempi lunghi. Unica pecca è l'apertura del coperchio dopo il sotto vuoto, la trovo ancora un po difficile ma sarà perchè non ho ancora trovato un metodo rapido ed infallibile per aprirlo senza impazzire ahahaha Consiglio caldamente a chiunque faccia questi lavori fai da te di comprarlo la qualità dei prodotti cambia DRASTICAMENTE in MEGLIO!

Compré la máquina en septiembre pero por problemas de salud no pude estrenarla hasta el mes siguiente. Y no funcionaba. Se me había acabado el mes para devolución de amazon y tuve que ponerme en contacto con la empresa resiners para contarles el problema. Tuve que mandarles un video, comprobaron que no funcionaba y me enviaron una nueva y en menos de una semana tenía una nueva maquina en casa. Estuvieron atentos a que llegara bien y que todo fuera ok con la nueva y es de agradecer. Respecto al trabajo que realiza la máquina muy contenta porque elimina las burbujas en 5 minutos y deja la resina limpia y transparente.