Aclorol USB Led Light Strip COB Led Strip Lights 5V Daylight Cold White 6000K 3.28FT 320Leds Flexible TV Led Lights USB Powered 1M for Under Cabinet Kitchen Living Room Shelving or Displays

I am thrilled with these Aclorol COB LED Strip Lights (24V, 50FT)! I was looking for a long strip to put up in my bedroom and these were the perfect choice. Continuous Light: My favorite feature is the COB (Chip-on-Board) design. The LEDs are so close together that it truly looks like a continuous, unbroken line of light, not like the obvious dots you get with cheaper options. This gives a much cleaner, professional finish. Color and Brightness: The warm white 3000K color is exactly what I wanted—it's bright but has a cozy, inviting glow. Great Value and Quality: The price is great, making these the best value I've found. The sticky tape holds up great too, which is often a point of failure on other strips. Highly recommend these for anyone wanting high-quality lighting that looks seamless!

These work just fine and easy to install. I am please with the cool light they put off. They put of a nice even light for a much longer distance then I thought they would. I am very pleased with these lights.

I bought these to cut and insert into a 3D printed light box (of The Grinch). I cut this strip to 9 LEDs and they look great. I will be able to use the rest of the strip on a later project. The diffusion is really good due to the translucent rubber coating. The self-adhesive backing stuck solid to the PLA material.

It was a good set of lights. The LEDs were on a strip. The cord could have been longer; it was shorter than what was expected, making it hard for us to use. The tone of the light is very nice and bright enough without being blinding.

Love this lighting! I used it for a project where I had to cut it into strips. It soldered well and worked perfectly

I've been searching for some LED strips to light up 3d printed lightboxes. These are the best I've been able to find at a reasonable cost. They're bright and easy to use, but the adhesive doesn't stick very well unless you're in the perfect condition, even then it tends to peel off at times. I've been needing to use super strong glue on the adhesive to get them to stay, and this is messy and time-consuming. This may be something that is an individual need, but I would give them a better rating if they had an option for a 90 degree angle at the wire-light meeting spot. I already need to put a harsh bend on these at that joint which makes me hesitant because I don't want to break the connection but I wish they would make a 90 bend version.

The length of the lights and cord are as advertised - 1 meter each. This was perfect for my project. I was concerned because some buyers said 1 meter was the overall length including the cord. The usb cable length was described as 1m, and that is correct. And the lighted length is also 1 meter. They are very bright and a pleasing warm color. They were actually a little too bright for my space, so I enclosed them in a white translucent plastic sleeve before mounting them, and secured the sleeve to the wall with finishing nails, instead of using the adhesive. I will probably buy more of these for other spaces. Note: at first I plugged them into a 5v usb adapter which had 2 ports, with a string of fairy lights plugged into the other port. This made the lights much dimmer. Once I plugged them into a single port adapter they were fine.

I love inexpensive LED strips because they're convenient when you have a small space that doesn't warrant purchasing a $20+ system with dimmer switch and transformer. I used a spare USB 2.0 outlet as well as a USB 2 extension to create a cold white ambient effect for part of the DIY modernization that's in progress for this bathroom. The adhesive works fine, but it tears diagonally around midway so just be cognizant of that. Otherwise: Bright, proper color, works with any generic USB 2.0 outlet, and the continuous light bar look continues throughout the entirety of the illuminated area and you can't see the individual LED spots. That latter concern is not an uncommon phenomenon with inexpensive LED strips. The 3-ft segment was actually a little bit too much for my bathroom ambient light objective, so I actually soldered the scrap piece to another spare USB cable I had somewhere in my house and used (no surprise) a spare USB 2.0 AC outlet - I gave this little table outside in my backyard (in front of the door, to the left of the photo) a cold white ambient glow. So, I was able to add ambient cold white lighting to two things in my house with the purchase of one inexpensive cable!

Seit mehreren Monaten im Dauereinsatz, effizient, guter Effekt, gute Klebekraft und leicht verlötbar. COB sind einfach viel besser als SMD-LEDs in diesem Bereich!

Bande à led au top!

Der Aclorol COB LED Streifen überzeugt mit einem sehr gleichmäßigen und hellen Licht ohne sichtbare einzelne LEDs. Das kaltweiße Licht (6000K) ist ideal für Küche, Schrank oder Arbeitsbereiche. Dank USB-Anschluss ist die Nutzung flexibel und einfach, und die selbstklebende Rückseite hält gut auf glatten Oberflächen. Die Verarbeitung wirkt ordentlich und der Streifen lässt sich problemlos anbringen. Ein kleiner Minuspunkt: Die Klebekraft könnte auf manchen Untergründen etwas stärker sein. Insgesamt ein praktisches und vielseitiges LED-Band mit schönem, durchgehendem Licht – empfehlenswert!

Not sticky at all.

This light strip is exactly what I needed. It’s bright, easy to set up, and the light is nice and clear without being harsh. I like that it’s flexible enough to fit wherever I want, and the adhesive holds well. The color is crisp and clear, exactly what I wanted. So far, it seems really durable too - I’ve moved it around a few times, and it’s held up perfectly. It’s simple, reliable, and adds a nice touch of light to my space. Definitely worth getting!