ElekTek Low Profile in-Line Torpedo Switch 2 Amp Use 2 or 3 Core Flex Gold Effect

This switch is as advertised and blends well if the connecting flex is of a golden colour. The switch arrived very promptly and works well.

Good looking switch but so small inside that it's quite difficult for big fingers to fit the wires into it. However once done it's a good switch.

The switch is good value and made of good hard pvc plus it is really easy to connect the wires. It's also able to take 2/3 core leads. I would definitely recommend.

Good product, easy to use, easy to fit, and it works well. Value for money. I recommend.

Perfect, firm grip on the cable

Nice finish worked well

Very good that this item comes with detailed instructions on how to prepare wires for connection to the switch terminals. Exact lengths to cut and strip. I followed these exactly but still found it very difficult to do. The switch casing is small and wiring is therefor very fiddly work. I fail to understand why there are 6 terminals to be wired which makes the job so much more difficult. The only wire which needs to be interrupted is the live. The neutral and earth could pass through the switch case intact which would require cutting and wiring up only one wire to two terminals. SO much easier. The switch seems fragile and only works when the switch case is finally screwed together. How long it will last remains to be seen.

My daughter brought her bedside lamp down as it no longer worked. What could be simpler! I changed the bulb and even fitted an SES LED bulb rather than the 40w original she had in there. It didn't work. Okay, easy enough. I changed the 5A fuse in the plug. It still didn't work. She sensed that the challenge was mounting as she cautioned me that the touch on/off lamp only cost £4 and perhaps we should just throw it away. I refused to give in, and opened the base. There, I found the touch switch module and managed to find an identical one on an Internet auction site for £2 delivered. I sent off for this and patiently waited for it. Rather than disturb the working in the base of the lamp I simply re-soldered all the connections to the new module which were of course identical. It still didn't work. Finally, I sent off for this rather nice switch from Amazon. It only has a 2A rating but this is more than enough even for a 40w bulb let alone the 4w LED one I fitted. I removed completely the touch switch module and pushed the wire out through the little hole in the side of the base of the lamp. This was a little short and rather than attempt to rewire the whole lamp I went with it and just used a little heat shrink tubing to protect the mains wire as I came out of the lamp. This also went into the switch to provide more comfort/security. Wiring the switch was easy. It is just a bit fiddly but if you trim the wires correctly and just take your time. Also please note I just had a Live and Neutral wire, so no Earth. Do not attempt this if you don't know what any of the above means - just throw your lamp away or, I guess, pay an electrician. The switch works beautifully and though the section of wire coming from the base is a teeny bit short the whole thing - well, just works without me throwing it away !

Très simple à utiliser et de bonne facture

Schaut gut aus!!!

Interruttore passante di scarsa qualità per via della plastica che non è molto resistente. Dato che la lo spazio per collegare i fili elettrici all'interno è stretto e poco maneggevole, si deve un pò forzare la disposizione con la conseguenza che la carcassa si deforma e non è possibile pià chiuderla con le viti che addirittura si spanano. Restiuito.

Dovevo sistemare una coppia di lampade da comodino stile liberty e tra tanti interruttori trasparenti ho scelto questi, molto soddisfatto, naturalmente per sostituirli ci sono anche le istruzioni dettagliate ma bisogna comunque avere un po' di dimestichezza... Li consiglio

Interrupteur 3 conducteurs Parfait je ,e pensais même pas qu'il existait ce genre d'interrupteur pour trois conducteurs Dommage prix un peu élevé