3D Printer Enclosure with Ventilation Kit, LED Light,Thermo-Hygrometer, Premium Fireproof Dustproof Tent Constant Temperature Protective Cover for Creality Ender 3 V3 SE/KE/Ender 3/3 Pro/3V2/3S1/Neo

Once built, it is pretty sturdy. It comes with a loud but functional fan, a hose clamp and a short hose, 3 inch inner diameter if I recall. The hose isn't long at all, so bring your own. It easily fits my bambu A1, and I managed to cut a barely big enough hole on the right side for the AMS tubes to get in. It also has a led light which is actually very good. The usb cables lengths aren't the best, so bring a usb hub and a usb extension cable! The left side has a velcro patch presumably for cables to be routed in, and the right side has a pocket. It claims to be fire resistant but honestly it doesn't seem like it. It's thin resistant foil with fabric stitches showing inside that could ignite, with a plastic front screen that could melt and eventually ignite. Buy this for the temperature control and fume extraction, as well as tinkerability thanks to the 8mm diameter pvc poles that makes the structure.

This does an excellent job of removing fumes and creating a safe printing space. The quality of materials is also really great. Huge drawback is that the internal framework does not fit together properly. The bars are too long. Mine won't fit, so all gather in one corner unable to squeeze into the holder. Update: the company kindly saw my review and worked hard to rectify the issue. A simple case of the wrong bars being sent. The after sales team were great and got me sorted 👍

This 4-M-Premium enclosure has been a helpful addition to my Ankermake M5, especially when printing with challenging filaments like ASA and ABS. It's easy to assemble and does a great job of maintaining a stable printing environment. The included LED light, thermo-hygrometer, fan, and exhaust pipe all contribute to successful prints with these materials. However, there's room for improvement in the design. Adding access points for external filament spools and better cable management options would enhance its usability. Additionally, the enclosure arrived with some creases and marks due to being folded during shipping, which slightly detracts from its appearance. Overall, despite these minor flaws, this enclosure is a valuable tool for anyone serious about 3D printing with ASA and ABS. It delivers on its core function of creating a controlled environment, leading to improved print quality and success rates.

Update to my review. Out of nowhere last night 3 supports that join the rods together have just snapped rendering the enclosure now useless for me. Larger than I expected but omg its great. With some air filters added inside I'm able to safely print abs on my kobra 3. The internal temperature is great and sits around 35⁰c when printing the light is great for the camera sold by anycubic. My only problem is lack of roo. In my bedroom for this the ace unit a laser colour printer and 2 computers I think I need a bigger house

Don't by fabric tore useless

Tolles Gehäuse für den Drucker. Mein Ender 3 V3 KE passt locker hinein, sodass ich nebenan noch zwei zusätzliche Spulenhalter platzieren kann. Der Drucker hat in alle Richtungen genug Platz zum Verfahren. Qualitativ kann man auch nichts sagen. Scheibe ist gut, Reißverschlüsse sind top und der Aufbau ist kinderleicht. Handschuhe sind auch dabei, sodass man sich an den Stangen keinen Splitter einfängt o.ä. Passvorm vom Rahmen und die umhausung ist auch sehr gut. Licht ist schön hell, allerdings sind die mitgelieferten Halterungen eher nicht so gut (Kabelbinder regelt). Die Kabeldurchführung ist auch etwas klein (reicht gerade so für den Stecker einer KGL) aber hierzu kann auch die seitliche Öffnung (Sideload) genutzt werden. Diese lässt sich gut via Klettverschluss wieder verschließen. Die Absaugung leistet auch gute Dienste, lediglich ein Filter wäre schön gewesen. Dennoch hält die umhausung den Geruch von geschmolzenem Plastik gut im inneren. Alles in allem ein toller Artikel der das drucken auch im Keller, der Garage oder anderen unbeheizten oder staubigen Räumen ermöglicht.

Frame extremely weak, assembled it on a soft couch and with pushing the frames (according to manual) together it simply broke. Save your money on a stronger construction

I put my BambuLab P1S in this and it works great and gives me peace of mind. No more PLA smells while printing as it all vents outside. I did need to cut down the supports a bit which were a bit too long, but wasn’t too big of a job.

everything you need in a print enclosure, plenty of space, fan is powerful

J'avais déjà des caissons en "dur" avec profilé alu, pvc, plexi, etc.... Vu le prix des matériaux, pour rentré une geeetech A10 très modifiée, je ne voulais pas investir beaucoup, j'ai donc choisi ce caisson. Très surpris de la qualité et la solidité de l'ensemble, l'éclairage est parfait, tout est bien pensé, sauf qu'il manque la plaque de fixation du ventilo d'extraction (à imprimer donc) sinon il ne tient pas, c'est la seul défaut. Pour vous donner une idée de la taille, la geeetech (taille ender 3) rentre à l'aise dedans. Une sidewinder X1 loge sans le support de bobine, ça vous donne l'idée de la taille : c'est grand !