BENFEI USB 3.0 Switch, USB Switch 2 Computers Share 4 USB for PC, Mouse, Keyboard, Printer, Scanner, USB KVM Switch Selector Compatible with Windows, Mac, Linux

Effortlessly Shares Key Peripherals, But Mind the Power Needs Setting up this BENFEI USB switch was a breeze. I needed a way to share my keyboard, mouse, and a flash drive between my personal desktop and my work laptop, and this little unit has solved that problem perfectly. The plug-and-play setup worked instantly on both my Windows 10 PC and my MacBook—no drivers to hunt down, which is always a major plus. The physical switch button is responsive, and the LED lights make it crystal clear which computer is currently active. Switching between them is nearly instantaneous for standard input devices, keeping my workflow smooth. I really like the build quality; it feels sturdy and not cheaply made. The included cables are a nice touch and have proven to be reliable. For my core use case of sharing a keyboard and mouse, this device performs flawlessly and has completely eliminated the need to constantly plug and unplug cables from my laptop. However, it's important to keep in mind its limitations with high-power devices. As noted in the manual, the unit includes a micro-USB power port for a reason. When I tried to connect a bus-powered external hard drive, it was not recognized until I connected the provided power cable to a wall adapter. Even then, performance with power-hungry devices can be inconsistent. This isn't a dealbreaker, but it's a crucial consideration. This switch is ideal for low to medium-power peripherals like input devices, card readers, or webcams, but may struggle with portable hard drives without supplemental power. Bottom Line: This is a fantastic and affordable solution for anyone looking to share a keyboard, mouse, and other low-power USB devices between two computers. It's reliable, easy to use, and works seamlessly across different operating systems. Just be sure to use the included power cable if you plan to connect anything more demanding than basic peripherals. For its intended purpose, it’s a great value.

An extremely useful add-on, if you were running to computers and having to share printers and a mouse. It is easy to switch between computers by just a press of a button. I used to have to remove the USB cords from one computer and plug them into another, which was a real pain. This completely eliminates all these extra steps. It is made out of somewhat flimsy plastic, but appears adequate because it’s not under any stress. It is somewhat difficult to find a good place to put it because their wires coming out of both ends and it tends to take up space on the desk. All in all, it’s a decent product.

I needed a way to connect two old monitors to two desktop PCs while sharing a single wired mouse and keyboard, and this did the trick! I still have to manually change the monitor inputs (clicking a couple buttons on the screens - no big deal), but this has been working well and I saved some money by not needing to buy a big hub. Easy to hook up, though a little bulky once you have all the cables in. But that is to be expected, and you can use the little sticky pads to affix it under your desk or shelf to keep everything out of the way but still accessible.

Cheap and works for my USB keyboard and mouse dongle to share them between 2 computers. But already found a few annoying issues. 1) Older USB scanner wouldn't work connected to the hub, needed to be connected to the PC directly 2) Included USB-A to USB-C cable would not work to connect the hub to my MacBook Pro. The A-to-A cable with the included A-to-C adapter did work. Not sure if this is a hub issue, a cable issue, or both. 3) Keyboard connected to the hub can no longer be used to wake my PC. Not sure if this is an issue with this hub in particular versus all hubs. Overall happy with my purchase and can deal with the annoyances, but it's cheap for a reason.

works really well. Allowed me to use the same keyboard and mouse for two different computers. Easy to use and it came with everything you need.

I have a wired keyboard and mouse attached. Upon powerup or switching, both mouse and keyboard appear to start (their LEDs turn on). After they are initialized in 2~3 seconds, the mouse only works 20% of the time. When the mouse does work, it works perfectly. If the keyboard is unplugged or in a separate port on a computer, the mouse works fine through the switch; but I need them both to be switched. Symptoms: The mouse jumps as if all the USB data packets for movement from the previous 2-3 seconds are received at once. Packets are definitely getting lost and/or corrupted because mouse button-up/-down/-click are often completely lost. Testing: Symptoms are the same for both computers (8 yo Win10 laptop and brand new Win11 minipc) and it happens on all ports (3.0 and 2.1) on both computers. It doesn't matter if external power is supplied to the switch or not. My keyboard and mouse are both USB 2 devices using Generic USB drivers from Microsoft. I also tested with my Logitech gaming mouse. It experiences the same symptoms with its specific driver. Details: Windows reports the switch as a USB2.1 Hub using Generic SuperSpeed USB Hub and Generic USB Hub drivers. I find that strange as SuperSpeed only exists on USB 3+ (blue plastic inside the ports vs. black). Per my understanding, it should be listed as a USB3.0 Hub which is backward compatible to USB 1. Interestingly, the Surface uses the same USB controller chip (VID=05E3, PID=0610), but those drivers don't work at all on my Win11 PC. Conclusion: I suspect it is a timing problem during initialization causing USB 3.0/2.1 confusion in the cheap controller chip Benfei uses. Or, it could very well have a buggy keylogger reporting everything one types back to the CCP. Benfei does not offer support, firmware or drivers for it, so we won't know until I HACK IT!

I purchased this KVM to reduce monitor, keyboard foot print at my work station. It is quite small and light, the cost is super reasonable so I had my doubts, however after 3 minutes to connect it worked immediately. It even has a wired remote control switch that I love, It takes up almost no space and the device can be tucked away anywhere your cables reach. The only slight draw-back is there is about a 3 second delay when switching. I highly recommend this product to anyone on a budget and has the need.

I have this plugged into a laptop USB c hub and my desktop. Switches instantly and when I'm gaming on my desktop or my laptop no lag or any other disconnects or any other problems with anything. Switching button is easy to press, device light clear this hub is a wonderful value. I have connected a mechanical wired lighted RGB keyboard, an rgb mouse, an Xbox one wired controller normally connected to it. Little flash drive also works well also when hub unpowered for short transfers. So that's all four ports in use at once unpowered not bad. I'm sure if I connected a hard drive or something to it I would need to use the power supply but that would not be a great idea if you switched while transferring files. I see no negatives at this low price.

Działa bez zarzutu z Logitech G502 Hero + Logitech G915 X. Jedyny wymóg to użycie dołączonych kabli USB 3.0. Jak wymieniłem jeden z kabli na deleyCON 0,5m USB 3.0 - Super Speed 5Gbit/s to były problemy z komunikacją.

Nice, exactly as described.

Ho acquistato questo switch perché volevo usare le stesse periferiche su entrambi i pc (un win e un mac entrambi fissi) senza dover scollegare e ricollegare ogni volta. Dopo qualche settimana di utilizzo, ecco le mie impressioni: 🔌 Setup semplice e immediato – collegare i due PC e le periferiche è stato facilissimo, plug & play e senza driver strani da installare. 💻 Commutazione rapida e comoda – basta premere un pulsante per passare da un computer all’altro, con tutti i dispositivi (tastiera, mouse, monitor, hard disk esterno) che vengono riconnessi correttamente e subito. 📈 Funziona bene con più periferiche – posso condividere 2 porte video più USB e tastiera/mouse tra due PC in modo molto efficiente, senza lag evidente o problemi strani. 🖥️ Risparmio di spazio e cavi – la scrivania è molto più ordinata e non devo più avere doppie periferiche, il che è comodissimo se si lavora con più macchine. 👌 Qualità costruttiva solida – il dispositivo è compatto, stabile e compatibile con Windows, Mac senza intoppi. ➡️ Consigliato se usi più PC con le stesse attrezzature e vuoi evitare di cambiare continuamente cavi o avere tastiere e mouse duplicati sulla scrivania. Un acquisto super funzionale per chi ha configurazioni con due computer ma vuole un setup pulito e facile da gestire.

Lightweight but strong, stable plastic build. I like that the cables are long enough and still perform well. Only complaint is that the button is recessed, rather than sticking out, so it takes some getting used to, especially if you mount it under your desk like I have. Using it primarily for my audio interface, USB eLicenser and mouse and keyboard for seamless switching between my Windows PC and MacBook. Transfer speeds are acceptable when connected to external drives. TAKE NOTE: This device doesn't send enough power for SSDs and portable HDDs to work. Those need to be directly connected to the computer - but self-powered external drives work well with relatively comparable speeds to direct connection. In all, good device, for what I paid for it, best deal out there

I bought a very similar USB switch about 4 years ago. Then that switch failed the last week of November 2025. It won't switch to the B (second computer), but everything on the first computer (A-Side) retained functionality. So I'm just reposting the picture I posted 4 years ago for the initial review. The layout and setup are the same except for the actual laptop. Originally a Dell Latitude, now it's an HP Probook - but the connections are the same. 80% of the time, the laptop is in use, while the desktop is mainly for personal stuff. I prefer this setup rather than getting the proper branded dock because the office upgrades laptops frequently, and different brands and models are provided. This is a simplistic and relatively inexpensive way to implement switching between two computers that share 4 USB peripherals. Yes, I know there are dedicated KVMs but this setup is good enough for me and is flexible enough to be able to accommodate any laptop changes or upgrades. This newer USB switch is slightly smaller than my previous switch. This also has supplemental power via USB-C while the old switcher had supplemental power provided by a micro-usb cable. In both cases, I do not need to use the 5V power since the mouse, keyboard, headset and webcam are all low-powered. Hub comes with all the necessary cables: 2 x USB A-A, 2 x USB A-C adapters, and a USB A-C power cable. I did not even need to use the new cables, it was a straightforward swap to my old set-up. My only complaint with this Benfei hub is the LED indicator. They are tiny, dim and very hard to see. Not a big deal for me but may be an issue for some people. For reference, my old switch had two x 2mm yellow LEDs; this new one has 2 blue LEDs about the size of a pin-head. Overall, this provides me with the functionality that I need without costing a lot compared to an actual branded dock and KVM.