Mabett Rear Speaker Pods Compatible with Ford Bronco 2021 2022, Upgrade 6.5" Pods for Bronco Accessories 4-Door, Interior Accessories Black

Pods work perfect and easy peasy to install. Picture shows adapter brackets. These do not come in the box and are not needed. 6.5" speakers are great. USE SOUND DEADENER IN THE PODS.

These fit very well in my 2022 bronco wildtrak. Easy to install and accepted the 6.75" rear speakers without issue. Great upgrade for sound in your bronco if you pair it with the Forscan changes.

Fits perfectly in a 2024 4dr Bronco. Easy to install make sure you follow instructions to avoid any mistakes

Very nice product. Went with Memphis 6.5 speakers and insulated box. Perfect fit along with great sound. I’m not mentioning slow shipping though

Great pods! Very well-designed, and direct replacement for OEM. About the install though: If you have a soft top, it's going to be a very easy install. 15-20 mins tops. If you have a hard top, it's strongly recommended to take the rear panel off, as the bolts are directly under it. And - if you're like me and you have a hard top AND an aftermarket roof rack that doesn't permit the rear panel to be removed, the install is going to be VERY difficult. Took me about 2 hours total to get everything installed. Toughest part was working with the mounting plates that attach to the roll bar - they sit directly under the rear panel, so it took a long time to work out the torx screws with my wrench. In my case, I ended up taking off the front and middle panel so I could at least have a visual reference on the mounting plates. I then took the entire plates off the roll bar and first attached the mounting plates to the new pods, and then attached the entire assembly back to the roll bar. Due to the lack of clearance, I had to take my time and wrench very slowly. The rest of the pods bolt up directly to the OEM mounting points, though. Once the pods were installed, I added Dynamat and polyfill, and then wired up my speakers. I went with Audison APX 65s. I had the Saleen rear pod adapters from an early install, and they worked great. End result - looks and sounds great! Pods are built very solid and, not including the top mount drama, installation was straightforward. I have a Kicker Key amp powering my front/rear channels, but I decided against using their DSP tune (tried it, not a fan). Instead, I used Forscan to flatten the EQ and restore low end to the rear speakers. Difference is substantial - lots of rear fill now and proper full range on front and rear channels. I'm finally enveloped in sound! Much fuller response all around as well. Highly recommended the Mabett pods - just know what you're getting into if you have a hard top or roof rack. To be fair, you'll run into this issue with any aftermarket pods, but still something to be aware of.