S&Z TOPHAND 36 in. x 84 in. Unfinished British Brace Knotty Barn Door with 6.6FT Sliding Door Hardware Kit/Solid Wood/Sliding Door/Double Surfaces/A Simple Assembly is Required (36, Door+J Shape)

These doors are great quality and craftsmanship! They were even better than expected for the price! Some assembly but great packaging and instructions. Came 2 days before expected! I would recommend this company. We bought 4 doors and they look great in our cabin!

This item checks all the boxes: Real wood construction and hardware of good quality. Assembly and installation fairly straight forward. Looks quite nice. Had 1 issue though: when I stained there were numerous spots that did absorb the stain very well and the end product looks blotchy. UPDATE: I added a 2nd coat of stain to the affected area and it looks much better.

In love with this door! Well worth the price. Easy to put together. We added a header board with ours.

Excellent materials(Heavy) and easy construction, will be purchasing a bifold next.

I ordered this door kit with low expectations but was surprised with the quality.One thing that is important to know, the way the door is packaged, it is set up to be used on a flat wall with no door trim around the opening.I wondered about this fact before placing the order but found no reference to the measurements of clearance from the wall.I needed this door for a bath / laundry room. I could have mounted the door rail on a piece of 3/4" wood but the hardware would have made a gap of about 1.25" off the wall. I only wanted a .25 gap from my doorway trim to the barn door.I achieved what I was shooting for with many hours of work.Tips for the build.Use glue and clamp the stiles to make sure they are tight before putting the 3" screws into the factory holesSand the center panel pieces with 220 before assembly.If you want a close fit like I have, you will need to cut the bolts that attach the hanger rollers to the door after drilling (the inside of the door) deep enough to counter sink the inside bolts. I used big washers (spray painted black) as shims behind the rail mounts on the wall, this helped the barn door clear the trim when closed.Door was sanded with 220 after assembly and between waterbased clear coat.The inside plate of the handle set, sits on the surface, so if you want a tight gap, you will need to make a counter sink slot (about 1/4" deep and the size of the inside plate) and cut the 8mm screws down appropriately 1/4" so the handle would be tight on the front.I also added soft close actuators so the door will not jump or slam during use. Also found on Amazon for about $25.Door was rough and had some minor tearout in the center panel dados, but pieces where fairly straight. I made sure to assemble the door pieces as soon as possible to reduce chance of warping. So far the door is relatively flat and straight.Rail is one piece and rollers move smoothly on the rail. The brackets for the rollers were wide upon arrival. I had to use a large c clamp to pull them closer and tighten the axle bolts. Otherwise they scraped the walls and did not move on the rail.Overall I'm pleased with this barn door kit.