MUSETEX ATX PC Case,5 PWM ARGB Fans Pre-Installed,360MM RAD Support,Type-C Gaming PC Case,270° Full View Tempered Glass Mid Tower PC Case,Pure White ATX Computer Case,Y6

Overall the case is very nice and arrived in perfect condition. All six of the stock case fans work fine. If you're not going with liquid cooling and plan to add more fans like I did, I would suggest moving the two side intake and the rear exhaust down to the bottom. Leave the other three on the top. The reason for this is that the stock fans are 6pin and connect to an adapter cable that has your 3pin argb and 4pin pwm. There are two adapters cables, each of which connect 3 fans, but each branch that connects to a fan is pretty short, and spreading the fans apart will make it near impossible to connect all of them. As others have mentioned, a full atx board goes right to the bottom of the case. You'll only be able to fit flat cables under the board, and even that is a bit challenging. PLAN YOUR WIRING OUT AHEAD OF TIME AND GET YOUR CABLES IN PLACE BEFORE INSTALLING YOUR MOBO. You'll never fit anything under there once the mobo is in place. The rear chamber was spacious enough for all of the excess cable, granted I didn't install any drives back there. I'm no expert at cable management, but I was able to get everything tucked and tied without having to force the back on lol. I ended up using the HDD compartment in the top right for a fan hub. This is a very nice looking case and has a spacious interior for airflow. If you plan everything out ahead of time you shouldn't have too much trouble.

I've been a die hard Thermaltake builder for well over a decade ;but decided to give Musetex a chance. While I still love Thermaltake I have to say I'm very happy with the build. I seen a review saying a regular ATX motherboard is a very tight fit ;but as someone that has been building PCs for myself and a lot of customers I say that the fit is normal. Do not make the mistake of buying a micro or mini ATX board for this case, you may be able to get them to fit ;but the case is made for regular ATX motherboards in mind. I went with a Ryzen 7800x3d, B850 Eagle MB, Thermalright Frozen Warframe Pro 360 AIO, XFX Merc Speedster RX7900XTX GPU, Thermaltake 850w power supply, 2 TB Gen 4 NVME and am using a 65" 240hz TCL monitor

NOTE: This review was modified as a result of Musetek taking case of my issues I did not like. After everything is said and done the case seems to be pretty decent. There was a couple of mobo studs that were no good and the color of cables on the fans didn't match the case however Musetek is sorting that out for me. Overall case looks good, she's got girth to her but I like lots of airflow. Filters should be easy to clean as they are easy to remove There are no screws to remove the covers just pull on the tabs and the magnets will release and I think that's a great design because it will always hold and snap tight. This case gives you a real opportunity to showcase your wire management skills because everything is out in the open and honest I prefer this because it shows you the cleanliness of the case. It's a solid budget case if you want a tempered glass case and don't worry about the gap in the front glass, there is no case that doesn't have this and many other gaps. I did an airflow test and the flow is very positive on this case travelling from front to top and back cleanly. If you are planning an all white look, make sure to buy white fans with white cables, the fans have black cables that come with it and if you are all about it being just right that's the one thing you will want to replace. Oh the cabling in the case other than the fans is good, no issues there and there are lots of tabs to utilize zip ties in the back of the case to do good cable management as well.

Built regular tower cases all my life so it was fun to try out this wide, boxy case that looks like an aquarium. It is ideal for Micro-ATX sized motherboards but for my full sized MB it was very annoying doing the cabling on the bottom (front panel power/audio/usb, fans/lights), especially with bottom fans. If there was just an 1/2” more space to slide cables through at the bottom it would be perfect. Otherwise there is still a lot of space behind the MB for cable management because of the width. For the price this case is a great value with the 6 ARGB fans that are included. Also, the magnetic dust filters on the top and bottom are cool.

Le boitier semble de bonne qualité! Très facile d’utilisation pour monter son build a l'intérieur! Beaucoup d’espace pour les composants! Les ventilateurs qui viennent avec sont étonnant! Vous aurez peux être besoin de modifier la disposition de celle du fond (exhaust vers intérieur) pour une meilleure circulation d’aire puisque ceci est un boitier dit « fishtank » mise a part cela assurez vous d’avoir un e connection JRaimbow 3pin sur votre carte mère pour le rgb des ventilateurs! Le câble management facile dapproche et assez d’espace à l’arrière je recommande vivement.