Skechers Memory Foam Car Seat Covers, Air Cool Mesh Thick Seat Covers, Car Seat Covers Front Seats Airbag Compatible, Automotive Comfort & Protection for Most Cars,Vans,Trucks, SUVs,Red

The driver’s seat on our 2009 Toyota Yaris Hatchback started to wear out on the back of the seat and started to tear, leaving a small hole. After researching car seat covers for several days, I decided on these Skechers Memory Foam Car Seat Covers, which turned out to be an excellent choice. While this review focuses on a 2009 Yaris Hatchback, here are the front seat dimensions for someone who might be considering these seat covers. The front seats are approximately 19 inches deep and 20 inches wide. With the headrest detached, the distance from the seat to the top of the seat back is approximately 25 inches. The width of the seat back is approximately 6 inches at the widest point and about 3 inches near the top. If your front seats are similar, you can expect a good fit. The seats in a 2009 Yaris Hatchback have a non-removable cloth flap at the back of the seat which is attached to the bottom of the seat. Other year models may also have a non-removable cloth flap at the back of the seats. The fact that the flap at the back of the seat cannot be removed, car covers which use elastic straps and round discs to secure them aren’t going to work. The quality of the Sketchers Seat Covers is top notch at a reasonable price. Don’t let the price fool you, these are premium seat covers. The seat covers are well packaged. There are two seat covers, and two headrest covers which came out of the box basically unwrinkled, and smell only slightly which goes away after a few hours. There were no instructions, but installation is pretty straight forward and there are instructions on the product page. They take about 15 minutes or less to install. Remove the headrest if possible. Pull the seat cover assembly over the seat. There is flap which you need to push into the space between the seat and back. The instructions tell you to pull the flap through, but because the 2009 Yaris has a non-removable cloth flap on the back of the seat, this can’t be done. Not to worry, push the flap in as far as possible and it won’t be an issue. Pull the seat portion of the cover over the seat and tighten like a fitted bed sheet. Tie off the top of the seat cover, replace the headrest, and install the headrest covers. There is a two-part elastic strap which the instructions say to secure around the back of the seat, but I found this didn’t work so well and I came up what I feel is a better idea. One part of the strap has a hook (rough, scratchy side with tiny, plastic hooks), and the other part a loop (fuzzy side that catches the hook when the two pieces are pressed together). I took the strap with the hook and applied it directly to the carpet under each seat. I attached a non-adhesive hook strip from sew in Velcro to the loop strap and used this to secure the straps to the carpet. Velcroing the straps to the carpeting under the seats has enough elasticity to allow moving the seat without the hook coming apart from the carpet and helps in holding the seat portion of the car cover in place (see photos). I used VELCRO Brand Sew On Strong Strips 8 Black | 2.5in x 1in which are available from Amazon: https://www.amazon.com/dp/B0CH19JC3X?ref=ppx_yo2ov_dt_b_fed_asin_title) The seat portion of the car covers have a strong elastic and may hold without the straps. While each seat cover does cover the levers used to recline the seats, it doesn’t affect the operation of the levers. The Sketchers Memory Foam Car Seat Covers fit the 2009 Toyota Yaris Hatchback front seats like a glove. They look good, feel good, and they stay in place. The black and grey covers are a nice match for the dark grey interior of our Yaris. I included several photos in this review which show the seat covers under different lighting conditions. The Skechers Memory Foam Car Seat Covers are like custom made car seat covers without the custom car seat covers price.

These seat covers seem like they fit well and they look nice. The automatic seat adjustment is still easy to use. I only bought the two for the front seats but they go well with the original back seat. They're easy to install. Quality seems nice, especially for the price. These are used in a 2023 Trailblazer.

These seat covers are the greatest. They are reasonably priced. They were easy to put on. They look like they are the original seats. BUT a small hole developed on the seam of the driver's seat toward the door side. It is slowly getting bigger since it is rubbed every time one of us gets in and out of the truck. These seat covers would have easily been 5 star, except for the hole. Not sure what happened. Is it our fault or was it a weak spot? Don't know. But I would still highly recommend them.

I was extremely surprised about the quality of this product. It was easy to apply to the seats. They look great fit well good stability easy to install.

Terrific product. I bought these twice --once for my Subaru Forester and also again for my Toyota Tacoma and they miraculously fit both very well and easy to put on. They have been on my Subaru for over a year without a problem, and so far, 6 mos.+, none in my Tacoma.

They fit and look great, but the durability is a little lacking. I waited a year to do my review to see how they handled, and a year later there's a big slash in the side of the seat cover just from where my hip rubs while getting into the car. If it weren't for that, these would be pretty solid covers. They're comfortable and they have certainly protected my car's seats. Ultimately, If you want covers for a car that you're not driving daily and getting in and out of a lot, these are pretty good for the cost. However, if it's your daily driver and you'll be getting in and out a lot, go for something that's a little more expensive but has proven durability so you don't have to choose between spending even more money to replace them a year later, or just sucking it up and driving with damaged seat covers.

Love these fir my truck and car very comfortable and look great can make your old car look new inside

Easy to install. Looks good and seem durable. Put in a 2021 Hyundai Elantra. Color black.

⭐⭐⭐⭐⭐ Excellent comfort and easy to fit! I bought these seat covers mainly because I suffer from chronic lower back pain and spend a lot of time driving. I honestly wasn’t expecting such a noticeable difference, but they’ve been fantastic. The memory foam is incredibly soft and supportive without feeling too thick. It adds just the right amount of cushioning and has made my driver’s seat much more comfortable. My back feels far less sore after driving, and I’m able to stay comfortable for longer trips. Installation was quick and straightforward, and they fit my seat really well. The material feels good quality, looks great, and is very soft to sit on. If you’re looking for extra comfort, especially if you have back pain or just want a softer seat, I highly recommend these. They’ve made a huge difference for me, and I’m very happy with my purchase!!!

Le quedo muy bien a mi Kia Rio 2017, es cómodo, aunque en los asientos de la parte de atrás se batalla un poco en ajustar

Replacement of the previous and so far is much better than the last I have.

Poor quality, there is no memory foam as advertised, definitely not worth the money.

Excellent - follow instructions carefully and it took 15-20 minutes. Look very smart and can see they will be easy to clean if necessary. Very happy with my purchase and it does enhance the interior