Touchless Faucet

This awesome faucet is elegant, easy to install and use. Save tons of water and delivers. Good quality and finished.

One of the faucets I purchased, the water pressure is very weak and my contractor mentioned it's a product issue. The seller reached out to me and sent me a replacement and the water pressure is great. Thank you for all the help here. Seller was quick to respond and address the issue and I appreciate that.

I set up a touch-free bathroom. With touch-free soap dispenser, motion activated light switch, touch-free faucet, and disposable paper towels. I got this item because most touch-free faucets costs a lot more money. I got the polished chrome version and like this overall. I did have a few issues:(1) Like the other review said in the pictures, the way it installs in a standard hole with the two hoses on the sides, it is impossible to have it perfectly centered. It is shifted a bit over to the right.(2) The o-ring on the bottom doesn't work well, and you have to be careful to line it up and tighten it down without pinching the o-ring and having the faucet tilted to one side. Also, not sure about how water resistant it is, due to the poor o-ring line up. In addition to the o-ring, I would suggest running a bead of stain-free Plumber's Putty around the hole, to insure a leak free seal. Otherwise, water pooling up on the sink-top surface may find a way under there and drip into the cabinet below.(3) I think the little lever is great for those who know it is to adjust the hot/cold. But for guests that aren't familiar with it being a touch-free faucet, they think that little lever is to turn on the water and start moving it around trying to turn on the water. I wish that lever was a little more hidden or in the back or something, so people wouldn't play around with it.(4) Wish the battery compartment also had an o-ring. The battery compartment lid is just a screw on, and if lots of water was splashed around could find its way into the battery compartment.

The media could not be loaded. I'm very pleased with this faucet...at least so far. It's heavy, nicely machined and chromed, and the included hoses and fittings are well made. No leaks!While others have pointed out that the two fittings in the base keep the faucet from being centered, a Dremel tool applied to the (non-included) deck plate takes care of this.I also drilled a hole in the deck plate and rotated the sink drain stopper mechanism to transfer that feature from the old faucet.Batteries are easy to change. If they don't last long, I'll drill a hole in the base of the faucet and power it from the 6V DC that I have under the sink.Two things that I try to minimize are setting clocks and changing batteries. Technology is helping the former, but not the later.Using a 3D printer, I made a sleeve that does three things:1. Lets the proximity sensor work as normal2. Blocks it so that water won't run when you don't want it to3. Fools the sensor into thinking that a hand is in front of it so that you can fill the basin or get the hot water to get hot without having to hold your hand in front of the sensor.The included video shows these features in action.

the temp control valve is leaking water after 6 months of use. i am in contact with the venodr for solution with step by step instruction on how to fix it. I sure hope they won't give me the run around. I will update every one here if they can stand behind their product.*update - Fredy (reseller) - send me a email and offer video instruction on how to repair the leak - I have request all the part (valve and o-ring) from him and have my repair man perform the repair. Let see if he will do what is right to correct this part. running for 6 months and resulting in a leak is not what i expect from this product. - honestly - for the effort - i think they should send me a replacement unit - and then i can send back my defective faucet.

I love the look of this product, but unfortunately the water won’t stay on long enough to wash my hands. It’s very frustrating that’s why I’m giving it only 2 stars. Perhaps the distance of the sensor can be adjusted by the manufacturer.

Update. We were wrong about the water lines. Reducing fittings included in box made the lines correct size. Now installed & we love it. If you are covering a 3-hole sink, do not use base plate they recommend. It is not wide enough. Get one at least 2.5" wide. We found one on Amazon a lot less expensive than local hardware store.

Let me start by saying I love the way this faucet looks. It wasn't hard to install either with an adapter from the local big box hardware store. I like the location of the battery box inside the top of the vertical post.It's the functionality of it that I'm having problems with after installing it. If my hand is in the zone where water will land on it coming out of the faucet, the sensor does not see activate. If I move my hand towards the sensor, the water turns on, but when I move my hand back towards the water, it immediately shuts off again. Repeat, hand moves towards sensor..... water turns on, hand moves towards water...... water turns off immediately. Something has got to be done about this! It's impossible to wash your hands!Two things that could make this faucet usable:(1) Making the faucet turn on for a short period after tripping the sensor(2) extending the range of the motion sensor to encompass the area where the water comes outI've sent a message to the seller and I'll report back if a workaround is provided