Outdoor Junction Box,Nineleaf IP66 Weatherproof Electrical Project Boxes PVC/ABS Plastic Enclosure Box Universal Watertight 4.9 x 3.3 x 2.3 inch (125x86x62mm), Fit with 20mm Cable Gland Grey

Well built boxes. Conduit fittings are too small to fit my conduit. Very disappointed in them.

Very good quality large waterproof extension cord container. Container has 7 access points for cords and PLENTY of room inside for various size cord ends. It has a rubber seal around the top and each cord access point is also sealed with several rubber seals to eliminate water access. Each container end has an all plastic snap to secure the lid. THIS is my only real concern for long term use of this product. For many years I've used indoor extension cords outdoors for my Christmas (and Halloween) decorating. I've OFTEN held my breath by doing this because I knew it wasn't safe. I've had my breakers pop numerous times and now my GFI outlets pop. I hadn't thought about this type product until this year to protect my connections from water. NOT an inexpensive option when needing approx 60 containers. I invested SEVERAL hundred dollars this year in a few different sizes of them. This item is extremely functional, serves as that piece of mind tool and provides complete waterproof protection for my display cords. I'm using 8 of these large ones and simply place them behind my blow mold decorations. I highly recommend this seller and product. Blessings.

Used this to house some low voltage unions (COAX & CAT6) outside the house. Read reviewer comments and took care when drilling access holes - everything went well, no cracking. This turned our cable mess into a tidy box and saved us an electricians fee.

This plastic junction box is sold as a weather/water tight box and has a well-sealing lid; however, it is very thin-walled. The body is scored for removing "slugs" to attach gasketed connectors for passing wire into the box. The thin walls cannot stand up to "punching" out the slugs nor drilling. My box cracked and pieces broke out with each attempt, leaving gaping holes. I did not intend to use it outdoors but in my attic, so glued it back together sufficiently to use indoors. I would not use a junction box like this one, even indoors, ever again. UPDATE - Aug 19, 2022 Seller offered and did replace the box. The Seller supplied some good advice on how best to open the scored holes, which is: 1) keep the lid on to maintain integrity of the box; 2) drill out the hole carefully. As you can see from the pictures, this worked out much better. Also of note, I used a Forstner bit the first time; that resulted in the wall breakage. This time, I used a small holesaw at low speed with the lid attached and with the box fully supported in my bench's end vice. I drilled holes at both ends, installed water-tight ferrules. As already said above, the box is a nice option for wire connections and now that I can easily apply the holes without breaking the walls, I've upped my rating to 4 stars.

Water proof and strong

This box does what it said it would!

Large enough for all the pond plugs. Water tight. Sturdy insulated box

The shape of the box is nice, it seals out water nice, I’d probably buy another one of these but I did have some complaints. The plastic is thin to the point it feels fragile, it’s walls should be twice the thickness it is. The so called knockout holes were my biggest complaint. I wish they would have just left those out of the design completely because of how they did it. They don’t just knockout like anyone who has ever installed wiring before would expect them to. Even with the cover tightly installed, as recommended, you likely aren’t going to just knock those out with a screw driver. I ended up drilling my 1/2” Liquid Tight connector holes with a 7/8” hole saw, thus making the built in shaped knockout holes useless. Had they of just not attempted to put them on there at all I could have still just drilled the hole but could have put it where ever I wanted instead of being limited by the worthless indentations they made into this. As the saying goes, if you’re going to do it then do it right. The plastic of the box is too thin to feel solid/sturdy. The plastic around the knockout holes is too thick to be able to just knock them out. If you need this in a location you just need to keep your wiring connections dry but aren’t at risk of it being bumped or banged into, and you have a 7/8” hole saw or knockout punch then this will work fine for you.

Mega Teil! Diese Abzweigdose hält wirklich alles aus – Regen, Schnee, sogar das Chaos im Garten 😅. Platz für 9 Leitungen, einfach zu installieren und richtig robust verarbeitet. Perfekt, um draußen Strom zu verteilen, ohne Angst vor Kurzschlüssen zu haben. Fühlt sich an wie das Schweizer Taschenmesser unter den Abzweigdosen – nur eben wetterfest!

Excellent

Perfect. Does exactly what you need it to. I bought the one with 4 glands included, fitted it to house a remote switch for outdoor lighting, works as it should, easy to fit, I'm a qualified electrician so have used this sort of product before.

Box itself looks reasonable. Not sure on the IP rating as theres no gasket on lid. That aside its solid. I would say though that if you have to use a hole saw to remove the knockout holes.. maybe its not so much of a knockout. OTherwise good. I used it for camera install with POE and conduit.

Super Kompakt