Snapmaker 2.0 Dual Extrusion 3D Printing Module for Dual Material Printing & Dual Color Printing and Breakaway&Dissolvable Support Printing,Compatible with A350T/A350/F350/A250T/A250/F250 3D Printer

I purchased a Snapmaker Artisan that would not complete a 3D print. After 4 months complaining with no actual results in view I purchased a printhead assembly as mine has never worked. After installing the new printhead assembly I am amazed at how well it prints. I have started printing all sorts of things I have been waiting to print!

All of the filaments are getting stuck in the hot end. I’ve had to completely disassemble Everything to get the filament out. This has happened multiple times. When it does kinda work, the Z axis doesn’t always level itself properly so the print gets ruined. The first time it jammed, I couldn’t even get the hot end out, even with cutting the filament out. I had to disassemble everything, the second day I got it. And that’s only because I was waiting on the printing sheet. I contacted tech support and got a couple of suggestions which I tried, then crickets.

If you already have a snapmaker 3 in 1, I have the A350, this is a great improvement on the original extruder. Setup was a breeze though the calibration did take about 45 minutes. After that I have been printing a lot with no bad prints. Latest was a 24 hour print to see how it would do and it came out great! I was hesitant to spend the money but I am very happy I did. Prints seem to go about 30-40% faster than they did with the single extruder.

This printing module had really poor print quality in the beginning that I believe was a software error. It took a while to get a response and after a software update it is printing better. I am happy with the current results.

tried everything, have been a snapmaker 2.0 user for over 4 years now, never had an issue until today. this product is just BAD stay away!

They should no longer be in business

I installed this in my Snapmaker A350T, and the thing was basically dead on arrival. Due to a host of design flaws, the unit fails to regulate heat properly, and it spontaneously stops extruding. I haven’t been able to successfully complete more than a few layers of a print. After months of customer complaints, Snapmaker acknowledged the design flaws and offered to ship a repair kit with a slew of parts necessary to make their extremely expensive add-on work properly. But because Snapmaker is so apathetic about helping customers, anyone requesting those repair kits at this point (mid-August) won’t receive them until October. Snapmaker’s “customer support” is a brick wall designed to ignore tech support inquiries from existing customers. It took them months to even acknowledge that these modules are fundamentally defective. If you want an overpriced, broken piece of hardware that won’t even be complete for months after you purchase it, be my guest. In my year of owning the Snapmaker, I’ve had easily three times the headaches I experienced with my prior two 3D printers combined. Buyer beware.

Will never work properly but they keep selling.

Works perfectly. I’m very happy with it.

Hatte mir zuvor einen 40W Laser bestellt und während der Prime Tage war mir der Dual Druckkopf doch etwas zu teuer da habe ich andere Drucker. Doch nach dem dann das Weihnachtsangebot mit 399 Euro für den Druckkopf fest stand konnte ich nicht nein sagen. Wie alles von Snapmaker läuft der Dual Extruder spitze habe mir noch die Hardenes Düsen bestellt Original von Snapmaker und mir wie auch an all meinen anderen Druckern noch Rubin Düsen geordert. Sind einfach die besten für Abresives Material. Dual Extruder läuft wie gewohnt und macht was er soll die Einrichtung dauert zwar etwas länger aber ansonsten ein spitzen Druckermodul!!

works excellent but has a hard time feeding tpu filament

Gleiches Filament, gleiche Einstellungen. Rechter Extruder funktioniert und die Qualität ist auch wirklich gut. Linker Extruder: Filamt bleibt stecken, Underextrusion. Auch mehrere verschiedene Filamente getestet und die beiden Hot Ends gegenseitig getauscht. Bin mit dem Support in Kontakt. Dieser ist gut. Solange das Problem nicht gelöst ist gibt es keine bessere Bewertung. Bin generell am Überlegen ob ich das Modul nicht zurücksende

Hat das Filament auch nur den Hauch eines Wiederstands auf der Rolle wird das hotend an Filament nach oben gezogen. Ich habe, um das Problem zu beseitigen die völlig falsch platzierten tube Halter entfernt und aufgebohrt, sodass der tube direkt am Extruder sitzt. Die Gegenseite ist im Gehäuse fixiert. So gehen gegebenenfalls vorhandene zugkräft der Spüle direkt ins Extruder Getriebe statt das hotend anzuheben. Auf drucken mit tpu ist eine Qual. Der spalt zwischen hotend und Extruder ist so groß das Filament hier einfach "abhauen" kann. Ein drucken ist so reine glückssache. Hier habe ich mir ein kleinen spacer gedruckt der das verhindert. Alles in allem für, zu meinem Kaufdatum, 500€ eigentlich ein ziemlicher witz.