Rust-Oleum 301494 Specialty Mirror Spray, 6 oz, Silver

Used this on some vases to make them into DIY mercury glass candle holders for flameless votive candles. I covered the outside of the vase in painters tape, stayed multiple layers on the inside until there was solid coverage, let dry, then blotted the inside very lightly with a paper towel dipped in white vinegar, and let dry again. You have to be careful - the vinegar is powerful! - but it works great. Just go easy and don’t rush the drying.

I rent a studio cottage and share the land with my landlord and they are always wanting more privacy and of course I always like my privacy too so, I bought some old single pane windows and I sprayed the mirror finish on the clear glass and then I sprayed black over the back of it. I didn't do very good on the first window It ran quite a bit and it looks obvious but, it also creates kind of a nice old antique patina to it. The other windows turn out better but, the mirror is not a vibrant mirror like you would have in your bathroom but it does give an old look to it.

This was alright. Not chrome but shiny.

We redid an antique window pane and used this on the back. It was amazing. The mirror effect is very reflective and clear. Amazing. Use in well ventilated area.

I restored a 100+ YO secretariat and bookcase which had a small beveled mirror in it. The silver was flaking off of the mirror and the cost to repair was unbelievable. This worked great. It doesn’t look perfect, but it looks very good.

I needed chrome/ mirrored finish, and ordered this based on the description and the cap in the picture. Unfortunately, it's a metallic/ shimmery light grey, like a silver car paint. That said, I didn't have time to order something else, so I had to use it on a project for an event. The helmet was supposed to be a mirrored finish, like a Daft Punk helmet, and I didn't quite achieve it. Later I turned a pink desktop fridge into a faux "stainless steel" look, which worked nicely. Coverage is very good, though you need to keep the bottle moving when spraying, or it affects the flake pattern noticeably. Dry time is typical for spray paint. In both cases I sanded the surface with a fine grit, thoroughly wiped clean with isopropyl alcohol, started with a plastic adhesion promoting spray (2 light coats), used a buildable primer (2 light coats) and after using this silver spray (3+ light coats) I applied a clear top coat (3+ light coats). For all layers, I followed instructions on each product by way of dry time between multiple coats. The finish has been very durable, despite harsh conditions and heavy use. If you need a silver-sparkle metallic finish, I highly recommend it. If you're looking for chrome/ mirrored finish, this is not the right product.

Have a small antique wall mirror that was yellowed and blemished. Actual re-silvering involved shipping out of state, and very expensive. So I bought 2 cans of this mirror paint. Practiced on a similar (but not old) piece of glass. Not great but I thought it acceptable. (Saw that the glass cleaner actually showed streaks, so on the old mirror I cleaned it and then wiped the cleaner itself off with a clean wet cloth and dried. No streaks.) BUT, THE BIGGEST PROBLEM is that the paint itself doesn't come out in a nice steady fan. It was an inconsistent, splotchy volume of spray. The first few sprays in a new can was better... but on the actual project I did the first thin coat of spray with the partially used first can, and no matter now many light coats I applied, that first uneven coat was evident. (SO IF YOU DECIDE TO TRY, USE A BRAND-NEW CAN FOR YOUR FIRST COATS - don't use the second half of your practice can for your first coat on the actual project) Yes, I followed directions, shook the cans very well before and during applications, etc. FINAL RESULT: my antique glass is ruined... well, maybe I can remove the paint, but then what? Don't want to try the same product twice. Could have a brand-new mirror cut to fit this unique frame. Will cost over $150, and I won't have the primitive design that someone hand-etched years ago. Disappointed.

I thrifted an old mirror and used a technique to remove some of the mirrored part from the glass to make it look antiqued. I accidently did more than I intended. This spray paint saved me! In my picture, the cloudy parts are the spray paint essentially on plain glass (any inconsistencies are from the original mirroring) . The more reflective parts are the original mirroring so you can get an idea of the difference between the two. Came out how I was hoping! Not totally a mirror reflection, but perfect for what I wanted. Great product!

busque este producto por muchos lados y lo encontré aquí, lo recomiendo , cumple su función perfectamente

اشتريته علشان احاول أصلح عيوب المرايا اللي عندي. منتج اصلي كما بالوصف والصورة بالظبط.

Don't buy it, fake product. Not same size of the original one, much smaller, fake branding, and used.

Superior of the products offered.

Good product