FLIPSKY FSESC 75350 84V High Current 350A ESC Base On Vesc with Aluminum Case Water Cooling Enclosure for E-Foil Fighting Robot Surfboard AGV Robot

This is a great product. I was able to diagnose existing issues in my 12s and 16s setup as well as review after use how things went. This allowed meaningful implementation of limits to keep within appropriate voltage and current ranges among other settings rather than just guess work. The setup was simple and there's plenty of guidance on the web through the vesc pages. The new firmware is a must. Very smooth pick up from rest and high fidelity speed control with my 4 and 5 series sensorless motors. Only criticism is the max erpm could be a bit higher for high kV high pole count motors.

Jeden cent wert, habe mich lange mit billigen ESCs rumgeschlagen, endlich eins was funktioniert. Seit über einem Jahr im Betrieb mit einem 12kw Motor, keine Ausfälle bisher

Has the ability to run 210A @84V. Definitely recommended as it's affordable, will require just a few knowledge to program and run the vesc. Edit: you shouldn't push these controllers to its limits, they will end up messing up mid-drive.

keine Gebrauchsanleitung vorhanden / Rechnung lässt sich nicht abrufen

Very fast but the one i received had obviously been used. The plugs had been cut off and there was 2 plugs soldered on power wires and a set of ring terminals were crimped on to outputs. The hall sensor plug had been cut off and adc plug was cut off along with a few other wires that had been cut ☹️ i hooked it up sensorless for a quick test and it worked. I just hope all functions work correctly. I am building an efoil to pit this in and net ready for install yet. Was bummed that plugs were cut off.