Titebond PVC Trim Adhesive and Sealant – 2-in-1 Weatherproof Bond for PVC, Molding – 6401, 9.5 Oz.

This stuff works great, but you must be careful with it. It is very strong and can make a mess if you get it on things you don't intend to.

Great for PVC to any material.

Excellent adhesion between pvc trim and tile!!!!

I needed to attach 1.75”x80” PVC trim strips vertically to several sets of wood French windows to create a weather-resistant overlap, and discovered this product when watching a YouTube video about how to attach PVC to wood. I sanded the target areas down to the wood since I didn’t want to risk the adhesive not sticking to the (who knows how old) paint, and the product worked flawlessly. Since I didn’t know how thick the product would be, I bought myself a slick new caulk gun with an adjustable thrust ratio, but that turned out to be overkill. This product was no harder to apply than typical latex sealant. It went on evenly and smoothly. I did end up using the higher thrust ratio, but that was because I wanted to have better control over how much sealant I was applying. (Okay, I admit it, I also wanted to justify my new caulk gun since it is super-cool and I wanted to keep it.) The working time of the adhesive was fantastic. Lining up 80” pieces of trim with only two hands can be a challenge; this product provided enough immediate grip to hold the long PVC strip in place, but gave me plenty of working time to slide each piece of trim back and forth a tiny bit to make sure the adhesive was spread across the back side of the PVC and also to make small adjustments to get the alignment as close to perfect as possible. I then secured each piece with spring clamps and left them to set for about an hour. The result was a really strong bond. Although it was probably unnecessary, I also ran a small bead of sealant up the edge as added protection against water penetration. If you’ve never used this type of adhesive, don’t be as intimidated as I was. It turned out to be pretty darn easy and the results were excellent. 5 stars.

I used this to create all PVC porch railing, Turned out great.

Pleased with product - exactly as advertised

This stuff is such a pain to work with compared to regular caulk, but the results are absolutely worth it! I purchased this to secure quarter round along the base of a bathtub instead of using finish nails and needing to patch and paint. I applied according to the directions and haven’t had any issues since installing several weeks ago. The adhesion is strong, and we held it in place for 10-15 minutes until it seemed to be holding on its own. Since I had so much left, I decided to use it to also caulk the baseboards in the bathroom, and it’s my new favorite caulk for larger gaps… after several weeks of temperature changes and bathroom use, there is no cracking at all! Cleaning up during installation is low key a nightmare… it’s soooo sticky, but I think it’s worth it for a great finish. It’s much easier to peel excess from PVC once it’s dried.

Not sure how to start this review but I have used this product before with great results. This time I'm not sure if the product is any good. I live in NV. And the product was delivered to my mailbox outside, (thank you very much), when I found it, the tube was 104+ degrees. Buy the time I retrieved my temp gun, went down to 103.8°. I hope it's still good once it gets to room temp. I'll let you know. Next time put next to front door in the shade, thank you. Only 3 stars for preheating my caulking before I used it.

I don't know what else to use to adhere PVC to wood, (other than possibly nails/screws). It is easier to use than super glue and spray, for attaching two PVC pieces together though clamps are required.

Works very well to glue PVC to itself and wood. It gives longer open time than solvent based adhesives making long joint assembly easier. Obviously it needs a longer open time. I am pleased I could find this product in Canada.