1PCS 2 Buttons Garage Door Remote Control for BFT Mitto 2 B RCB

Works flawlessly. Just program it as described which takes about 10 seconds. I had reservations whether it will work but to my surprise worked like a charm.

I was a bit nervous to order in case it was not compatible and how to program, but this is extremely easy to program using your existing gate remote/fob and keep as spares. Step 1 1. Stand by the motor gate 2. Press and hold the top 2 buttons on the EXISTING remote (you should see a light come on) and count to 2 and then release the 2 buttons. 3. Then hold the open gate button on the EXISTING remote and count to 2 then release the button. Step 2 Now do exactly the same thing on the NEW remote, as in: 1. Press and hold the top 2 buttons on the NEW remote (you should see a light come on) and count to 2 then release the 2 buttons. 2. Then hold the open gate button on the NEW remote and count to 2 then release the button. If you have multiple new remotes, just repeat the sequence in Step 2 on the NEW remotes, there is no need to do step 1 as long as you do it switfly one after the other. I programed 3 new fobs in less than 20 seconds. Finally, wait for 20 seconds after the last button press before testing the remote! This timer allows the remotes to come out of programming modes. Enjoy!

It was connected or programmed after 2-3 tries However, I could not programmed the garage gate at all. Its value for money.

this product was perfect and so easy to program , thank goodness for Amazon as I was quoted £70 for two and this product was less than £ 20 for two

Definite manufacture/batch issue with these. I can't send them back as I threw the packaging, error. Otherwise I would be returning the items. The plastic case buttons don't properly reach the PCB buttons, therefore you have to squeeze REALLY hard. These can't be genuine BFT items - do not buy. Go through a proper electric gates company.

Good product, works well and the video was very helpful. Otherwise you can also find plenty on you tube that explain how to program the fob.

- Have just received this, it’s almost identical to the current BFT FOBs we have, except the coating is a bit more premium and has a nicer feel, along with the red LED being noticeably brighter. - In terms of range it’s perfect, at least matches my old one, perhaps can do better but have not tested. - Well-priced and neatly packaged in yellow envelope. Even comes with a small keyring on string - One thing I have done is replace the battery immediately, as the current battery seems unbranded/cheap, a bit flimsy and probably won’t last that long. I put in an energizer 23A which has never done me wrong. - Instructions with it weren’t clear but all it took was a quick YT tutorial. If you already have this same FOB or the 4 button equivalent all you have to do is: 1. Hold both buttons on OLD remote briefly until LED comes on 2. Press current open button on OLD remote. 3. Hold both buttons on NEW remote until LED comes on 4. Press button you want to use on NEW remote. All within a space of approx 10s Very easy, might take a couple attempts to get a hang of it. Older remotes have a ‘secret’ button rather than holding both buttons, again YouTube video by gateremotes.co.uk shows this across different types. If this doesn’t work, your gate may not be set up to be programmed. You’ll have to refer to manual/support re control panel. Note it appears you must first have a current working remote for this to work

Definite clone/ripoff ones, they are much cheaper quality than previous replacements I've bought for the same price. The buttons need to be pressed extra hard because it needs a little extra material added inside which I'm going to do myself; the plastic button needs to be longer to hit the tact switch correctly. But they still program and are still accepted by the gate so you get 3 stars rather than 0.

Parfait. Les 2 télécommandes semblent être d'origine. La livraison a été rapide et même si l'emballage est minimal, c'est plutôt bien protégé dans l'enveloppe à bulles. Pas de mode d'emploi pour la programmation dans l'emballage mais il est clairement indiqué dans le descriptif du produit sur Amazon. La programmation est un jeu d'enfant si on respecte bien les instructions. J'ai programmé les 2 nouvelles télécommandes en moins de 5 minutes ( avec une qui est fonctionnelle), sans outils ni ouvrir le capot du moteur de la porte de garage. Rapport qualité prix nickel.

Passt, funktioniert.

Rendero , non ci sono istruzioni

Funcionó a la primera y la configuración fue muy sencilla

Nikel