GT OMEGA Classic Wheel Stand - Foldable Entry-Level Sim Rig, Pre-Equipped with a Shifter Mount and Chair Link, Adjustable & Upgrade-Ready

I bought this stand not for steering wheel but for flight gear, I wanted a stand that would hold a flight yoke and throttle quadrant and also a hotas system at the same time, so when I spotted this I thought it might be ideal for the purpose and I'm wasn't disappointed, the shelf where you would put the wheel was almost made to measure and my yoke an throttle quadrant fitted on hear perfectly while the hotas throttle was attached to the supplied shelf on the left and the joystick was placed on the right supplied shelf. Rudder pedals sat on the bottom platform and I had my perfect stand. Quality was much better than I thought with a good solid sturdy stand, it's easy to fold away when not in use, I took a chance on this hoping it would do the job and it hasn't disappointed. If you're looking for a racing stand then look no further, if you want to put flight gear on it then this is perfect, highly recommended.

Really well built excellent frame for my driving force GT wheel I have but also for the g27 or g 29. Easy to put together. Fast delivery and looks good. Enough scope for customising and adding to. Good start to a full racing simulator or for the spare room. Easy enough to to flat pack and get out again (though probably not with the wheel on there) and very sturdy. Very pleased with the product.

TLDR; It’s a good enough product, with a few issues. Issues that once assembled, can mostly be ignored. Would recommend to any potential buyers — Especially if it’s on sale! I have a glass desk, so mounting my steering wheel to that was immediately out of the question. Looked at large cockpit type options, but decided they were too large, and I wanted something that was 1. Small, but stable & 2. Looked good — I have found that with this product. Assembly was quick and relatively easy. Just a matter of attaching a few things. Adjustability is awesome - Multiple positions for pedals, and wheel height/angle. It’s light enough to move around ________________________________________ Downsides: 1: Mounting the pedals was completely fine. There’s a detailed chart showing where each bolt needs to go for any wheel the stand was designed for. But mounting the wheel was slightly more fiddly, and I ultimately had to prop the wheel up against the wall to get the bolts in. Reducing the side of the lip around the wheel area would allow for the wheels built in clamps to hold & make mounting significantly easier. 2: Tightening the bolts around all around the stand seems to be vital for it to not rock around. Obviously not the end of the world, but would be good if I didn’t need to do it myself. 3: While the products sturdiness is generally good, it would be good if it were more stable when it’s pulled towards you. Extending the feet slightly seems like it would be a good solution. 4: Bolts - They don’t make it clear which type or bolt needs to be used for what. Just sort of had to guess what made the most sense. Highlighting that there is supposed to be left over bolts would be good too

Well made, but items for chair link missing which is the reason I purchased this stand in the first place. Instructions awful too, but everything has a place and if you watch some YouTube videos you’ll be fine. . Seller absolutely brilliant. Resolved issue of missing item and sent within a day. I might go full on and purchase the accessories to complete the entire set up. Overall brilliant service and brilliant sturdy product for my basic sim racing set up

It arrived while my son was here who easily knew how it should all fit together, but seams simple enough to assemble. The end result though is PERFECT. To have the gear attached properly & not clamped to a table & the pedals moving all over the place is obviously the recipe for happy racing. Buy it & enjoy!

It's good and sturdy when I first got it. Now only 2 months later the bottom screw that holds the top part of the frame up has threaded. Meaning only one side is properly tightened. I didn't apply much force, just enough to make sure was tight. Not sure how much longer it will last now. I think the screws goijg into this part od the frame should be longer too. Shame really.

After getting a Logitech G29, I bought this to complement the wheel. Setup involved no instructions but common sense is enough to get it finished (really, it's putting the rubber feet and tightening bolts on and sticker, if you wish). The rubber feet are great because my sitting room has a wood floor and I would hate to scratch it. The wheel stand is held firmly in place by these feet meaning it shouldn't move in the middle of a race. The stand has two height settings - I used the highest one because I play using an armchair. It's a bit too high, but I think this setting is more aimed at office/table chair heights. The lower setting would be I imagine for the race seat add on or gamer chairs. (think more a F1/single seater position) The holes on the stand meant I could fasten the steering hub to the frame and give extra support to the clamps (this steering hub plate can also be tilted to suit). The G29's pedal set however, I wasn't able to find holes in the plate to match. There is however, a bracing bracket which does an adequate job of stopping the pedals from moving around. The main reason I picked this stand was it's ability to fold almost flat (and also to not have a bar between my knees) and it does so in no time at all. 2 bolts are removed, the upper part laid down and the bolts returned to keep it locked and it can be stored away. I keep mine under a spare bed, with I would estimate a 10 inch clearance. However, because of the frame's robust build quality and having the wheel set permanently fixed to the stand, the weight of stand in total is around 15-17kgs I'd estimate so please bear this in mind if you're planning on moving the stand in and out of storage often.

Used with a G910 and peddles. No manual stick, but the arm and plate are included, just not using them. It's a solid bit of kit once assembled, fairly heavy but then it needs to be otherwise you;'d have movement which defeats the purpose. The angles available for the wheel mean it works in the ground based rocker chair (just...unless you slouch)...all the way up to a proper dining chair type position. There is a little fine tuning available too if you can't quite find the angle you want in the main adjustments, this can help (the wheel plate has perhaps 3-4mm tilt as well). Extendable wheel section is good too, particularly for a lower seating position and if you're taller. Works well on hard floor and carpet (base has gripped feet which keep it in place).

Was mir direkt beim Auspacken auffiel, war die gute Qualität aller Teile und das vernünftige Gewicht. Er steht bei mir auf Laminat und hat GummiFüsse mit reichlich Durchmesser, damit schont er den Boden und an verrutschen während der Fahrt ist nicht zu denken, im Gegenteil, zum verschieben muss ich ihn anheben, nur mit schieben passiert da nichts. Ich fahre in einer Liga und meine Kollegen, die einen Wheel Stand mit Mittelstange besitzen, sind etwas neidisch auf dieses Teil. Alles lässt sich ausreichend einstellen oder ggf. nachbohren und platzsparend verstauen. Ich selbst bin 173cm groß, schlank und sitze beim Fahren auf meinem Sofa mit Standardhöhe und durchschnittlicher Tiefe der Sitzfläche. Ich war etwas skeptisch ob das passt aber es passt wie angegossen und hat sich für diesen Preis allemal gelohnt. Auch top der Versand aus den UK über die Feiertage binnen einer Woche. Der Stand kam zusammengebaut, der Shifter Holder war jedoch separat verpackt. Nicht zu vergessen ist die Möglichkeit einen Seat Frame anzuschließen (~60€), ob man das dann mal macht oder nicht aber wenn, dann muss man kein komplett neues System kaufen. Verwendet mit einem T300 RS, F1 Liga 100% Rennen also ordentlich Last drauf.

No puedo comparar con otros soportes porque es el primero que tengo, dicho esto: se monta en media hora siendo mínima mente hábil y con las herramientas que trae, que son de usar y tirar. Lo tengo con un g29 con cambio, es sólido y firme, pesa bastante lo que lo hace mucho más estable, aguanta perfectamente los embistes del juego, seguro que los hay mucho mejores pero para un usuario medio es más que suficiente, resumiendo, como dice mi titulo, un buen producto a un precio razonable. Viene con dos soportes para el cambio para que uses el que mejor te vaya, yo he usado el que se monta arriba y me parece perfecto. Por último y por poner una pega, no vayáis a pensar que soy comercial de la marca, diría que no es comodo para andar plegandolo constantemente es pesado y engorroso además con el volante, cambio y pedales montados no ganas tanto espacio al pegarlo, yo lo compre con la idea de guardarlo plegado y he optado por buscarle un hueco y dejarlo montado siempre y jugar en el sofá en vez de comprar una silla específica para conducir, se adapta perfectamente al sofá y es cómodo para jugar así, tampoco soy muy grande, mido 1,70. Espero que mis comentarios os sirvan.

Degelijk met veel aanpassingsmogelijkheden.

Le support arrive pré-monté et est facile à mettre en place. Il se réglera aisément à n'importe qu'elle position de jeu. Il est certes un peu lourd mais c'est selon moi un gage de qualité qui tiendra dans la durée. le montage se fait sans soucis. Il m’aura fallu une vingtaine de minutes. Tout est bien pensé, les visseries n’ont aucun jeu, tout se monte et se démonte sans difficulté. La conception est basique mais efficace. Cela parait costaud pour durer dans le temps Une fois votre cession de gaming terminée, le support se repli pour être stocké à l’horizontale ou à la verticale dans un placard par exemple et vous pouvez laisser le volant et les pédales dessus! Merci de cliquer si utile :)

Ottimo 🙌 Provenivo da un supporto di marca generico che era di bassissima qualità, questo gt omega è spettacolare qualità costruttiva eccellente bello robusto e pesante ed è regolabile in tantissimi aspetti sono molto contento si adatta perfettamente al logitech g29 talmente me da gusto che ho anche ordinato le barre di supporto sul sito ufficiale per rinforzare i bracci ed è diventato un pezzo di marmo anche con le sollecitazioni più forti solidissimo, ho anche ordinato il pezzo posteriore del telaio al quale montare il sedile 👍 poi con una delle due staffe per il blocca sedia mi sono inventato il battitacco per il piede sinistro così quando uso la frizione non mi si stanca il piede tenendolo sul pedale e l’ho adattato perfettamente ve’dig sono molto soddisfatto👍