Rubber Edge Trim, Fit 1/16"(1.0mm), Length 10Ft, Black Color

I used this to finish off my inner fenders on my Jeep where I had cut holes for an aftermarket sway bar disconnect. Worked great. I did not have to notch as much as suggested to go around curved areas. Seems to stay stuck on well. I guess after more offroad use I will know for sure but if I have to re-do it occasionally I would still recommend!!

I ordered this to cover the edges of some plywood in an outdoor installation. I painted the plywood with glue first (and let it dry) to give it a smooth surface for the adhesive to bond; but the adhesive is very sticky and I think it likely would have stuck well without that. It is much softer than I expected. In my application that doesn't matter, but it might in yours -and that could be either good, or bad, depending on what you want it for. I would guess it is about 50 durometer Shore-A, which is about like a bicycle inner tube. Nice and soft, very flexible. I ordered the 3/4" size, and it fit well on my 3/4" plywood, which -as most know- is always slightly less than 0.750". There seemed to be a bit of room to spare, so I believe this is nearly or exactly 3/4" ID. I found the application very easy: I peeled off the liner from the center adhesive first and got that positioned and stuck down, then peeled off the side liners. I'm sure it would also work to peel one of the sides first.

Exactly as described! Works beautifully! Very easy to install. Great quality!

Follow the application instructions and you will be pleased with the results. I find that this rubber edge trim protects my painted Barn Quilt sign edges prior to being hung.

The epdm material is great - firm, but stretches around curves. Unfortunately the glue isn't strong. It sometimes peels up when you pull off the protective strip, and won't hold under any tension on a curve. Fortunately my project allowed me to use upholstery tacks around the sides to hold the edging down. Since only a tacky contact adhesive will stick to epdm, I'm not sure how to solve this issue. This is probably the best of what's out there.

I have a repurposed plant stand in my home office that I use to hold stuff for work. The plant stand has a metal base with a raised metal edge (to hold pots, of course). However, I don't care for the thin metal edge when I am using it for other purposes. This trim was PERFECT to clean that up. I had 4 circular shelves that needed to receive trim, and 10 feet was the perfect amount. I generally pride myself on including excellent photos with reviews, but unfortunately it was hard to do with this. I apologize for the quality of the photos. Because the shelves I was trimming had support poles, I had to cut the trim to fit. It is easy to cut and semi-easy to measure (it does curl up on its own d/t packaging). The instructions make a ton of sense - place the trim, adjust to where you need it, then use tweezers to remove the plastic film, which exposes the adhesive. However, in my situation, I could not reach the film when applying, so I removed it beforehand and applied the trim after. This is less than ideal, because it then sticks to itself, but I was still able to apply it relatively easily. I was even able to slightly adjust it after initially applying it. Again, not ideal, but this isn't a project for NASA, and it still turned out looking great. Overall, after applying this trim to the metal edges, my plant stand / desk companion ended up looking CLEAN. I no longer have to worry about the edges scratching my keyboard, xbox controller, tv remote, or whatever I decide to place on it. At $7.99, I feel like I got a great value.

It worked perfect for the small job that I was working on. My dogs food and water bowls were rattling and this solved the problem!

Very hard to apply

Good super

Tolles Produkt und einfach zu verwenden. Bietet einen guten Schutz gegen scharfe Kanten!

⭐⭐⭐⭐⭐ Excellent produit, je recommande ! Je suis vraiment très satisfait de mon achat. Le produit correspond parfaitement à la description et à ce que j’espérais. Dès la réception, j’ai été agréablement surpris par la qualité et le soin apporté à l’emballage. Tout était bien protégé et le produit est arrivé rapidement, sans aucun problème. Après plusieurs utilisations, je peux dire que le produit est de très bonne qualité. Il est pratique, facile à utiliser et surtout il fait parfaitement le travail pour lequel je l’ai acheté. Les matériaux donnent une bonne impression de solidité et on sent que le produit est conçu pour durer. J’ai également apprécié la simplicité d’utilisation. Pas besoin de passer des heures à comprendre comment ça fonctionne, tout est assez intuitif. C’est exactement le genre de produit que l’on peut utiliser au quotidien sans prise de tête. Pour le prix, je trouve que le rapport qualité/prix est vraiment excellent. J’avais regardé plusieurs produits similaires avant de faire mon choix et je ne regrette absolument pas celui-ci. Il répond parfaitement à mes attentes et je pense que je referai confiance à cette marque pour de futurs achats. La livraison s’est également très bien passée, avec un colis arrivé dans les délais annoncés et en parfait état. Bref, très bonne surprise ! Produit de qualité, pratique, efficace et conforme à la description. Je suis entièrement satisfait de mon achat et je le recommande sans hésitation à ceux qui cherchent quelque chose de fiable et de bonne qualité. ⭐⭐⭐⭐⭐

Excelente moldura para proteger la puerta de tu auto.

Stinky but works ok