NAOEVO 18 Gauge Wire 2 Conductor Electrical Wire, 18 AWG Stranded PVC Cord, 12V Low Voltage/Tinned Copper/Flexible Cable for Automotive Wiring, Lamp Cord, Marine Cable (100FT)

I needed to add an additional zone to my irrigation system. Luckily, there was a main supply line with two valves near the area I needed an additional zone, but I needed 90 feet of wire to reach the area. I found a 100-foot roll of NAOEVO jacketed 18-2 multi-purpose wire which indicated it was acceptable for landscape lighting. Thus, it should be fine for irrigation system wiring which is often 20-gauge wire. Because of the length of run, I used 18-gauge wire. The description indicated it came with 56 “packs” of heat shrink tubes and 20 “packs” of cable ties (“packs” should be interpreted as pieces). As shown in my photos there was a bag of numerous short pieces of 3/16” heat shrink tubing (I didn’t count them but there was a good handful) and twenty 11-3/4" cable ties. I did not take any installation pictures because my hands were muddy during the entire process of installing the wire. I didn’t use either one in my application, but both were of good quality. Not mentioned, but included, were two Velcro cable wraps about 8 inches long with the NAOEVO name. The stranded wire itself is very flexible which was one characteristic I needed because I intended to push it into a small gap I opened between the edge of my grass and my foundation. It flexed easily as I pushed it into place with a 2-inch-wide piece of wood. The outer jacket of the wire is very smooth and made it easy to push the wire into the gap. Also, the outer jacket is tough (I had to install a new blade in my utility knife to cut it readily). The insulation on the inner conductors is thick, but my wife stripper made trimming that back easy. After installation, I performed a quick Ohmmeter test which confirmed that the wire was not damaged during installation (i.e., not open or shorted). A quick operational check of my irrigation timer also confirmed that the installation was good. Price was reasonable and was discounted when I purchased it. Overall, I’m completely satisfied with my purchase, but only time will tell if the wire lasts.

I recently purchased the 18 Gauge Wire 2 Conductor Electrical Wire for my automotive and lighting projects, and I am extremely satisfied with its performance. This wire is perfect for low voltage applications, such as automotive wiring, LED strips, lamp lighting, and marine projects. Therefore, I am giving it a five-star rating. The wire is made of high-quality 18 AWG stranded PVC cord, which provides excellent flexibility and durability. I have found that this flexibility makes it easy to route the wire in tight spaces and around corners without any issues. Additionally, the stranded construction ensures that the wire is resistant to breakage and can withstand the rigors of demanding applications. The tinned copper conductors are another great feature of this wire. The tinning process adds a layer of protection to the copper, making it more resistant to corrosion and extending the lifespan of the wire. This is particularly important for marine applications, where exposure to moisture and saltwater can be a concern. The 18/2 wire configuration, with two conductors, is suitable for a wide range of electrical projects. It allows for easy connection of various components, such as LED strips, lamps, switches, and more. The wire is color-coded, with one conductor in red and the other in black, making it simple to identify and connect the positive and negative terminals correctly. The length of the wire, 100ft (30.48m), provides ample supply for most projects, allowing for flexibility in routing and installation. The wire is neatly packaged and easy to handle, without any tangles or kinks. I have used this wire extensively in my automotive projects, and it has performed flawlessly. The low voltage rating of 12V ensures safe and reliable operation without any risk of electrical hazards. The wire's insulation is of high quality and provides excellent protection against short circuits and electrical interference. Overall, the 18 Gauge Wire 2 Conductor Electrical Wire is a reliable and versatile option for various electrical applications. Its flexibility, tinned copper conductors, and durable construction make it ideal for automotive, lighting, marine, and other low voltage projects. I would rate this wire five out of five stars for its quality, performance, and versatility. It has met and exceeded my expectations, and I would highly recommend it to anyone in need of a reliable and durable electrical wire for their projects.

Really great for wiring my fuel pump black coating on the out side is very durable and has help up to the elements under my truck

This wire really simplified running 12v control wire to an RV water heater (switching from electric to gas). Nice wire and easy to work with. The shield is nice for all the things that can happen in an RV.

It’s a nice cable but just a word of caution about using it for landscape lighting: quick connectors won’t work with this cable because the leads cannot be separated.

Used for installing LEDs on a boat. High quality, additional wire ties (plastic zip and velcro) included. Seems like a great company, I have bought to other AWG sizes from them and am very satisfied.

Excellent wire I used it for all of my UT wiring for lights works great. We ordered it a few times.

Very good quality and great price

good quality

جميل وجودته اعجبتني

Great cable. I used it to completely rewire the sound system on my Harley - front and rear. It's a very resilient and robust cable with the outer sheathing to with stand the vibrations on a big twin motorcycle, yet flexible enough to conform to the frame and withing the fairing. Vey happy.

Nice quality

Good quality and price