Ear Pads

Soft and comfortable. I prefer the soft fabric of this set of pads to the plastic coatings of others. Second time replacing pads and both times they seem impossible to install, but they eventually attach, and stay on with no hint of coming off. These pads are awesome, soft and super comfortable.

I have a pair of Sennheiser HD4.50BT that came with ear pads made for a mouse's ears. Although the headphones are great in all other aspects, the factory ear pads are just way too small for an adult human's ears - actually, just the hole where your ear fit into is tiny (although,the do work well on tiny ears). After my last travels where I folded and stuffed my ears into the tiny Sennheiser ear pads I decided it was time to look for a replacement pad. After much searching and reading of reviews I decided to give these a try...EUREKA! My ears were singing me praises and shouting "hallelujah!" after just a few minutes in the new ear pads. No more folding and stuffing. I just put the headphones on like normal and they fit as they should. No pressure on the ear or lobs and no pain or discomfort anymore. They have very good padding and are fit the Sennheiser headphones perfectly. Some people say they are difficult to get on, but I have replaced headphone ear pads on lots of headphones and didn't really find it any more challenging than usual. But, for a newbie, I can see how replacing ear pads is a bit of a struggle. Anyway, if you have adult human ears and want an ear pad that fits them comfortably then look no further. Even with baby ears, these are an excellent choice for replacement ear pads. May your ears rejoice!

Brought new life to an old set of headphones. I have an old set of 4.40BT from 2017, the ear pads were so nasty they would peel off my ears and leave behind specks and splotches of the fake leather material on my ears. Bought the mesh fabric option to replace with. Now for installation, it’s not easy. No where near as easy as all the videos make it seem. The band around the edge for the mesh is very firm, not as pliable like videos using fake leather replacement material. Just take your time and you’ll need a plastic tool of some kind. Like a plastic spudger. Unfortunately no tool is included in this purchase. I had one available to me. The mesh is soft and comfortable, much more breathable than the original ear pads.

They were a bit annoying to put on, but once installed they make my 450BT extremely comfortable as they're much more open around the ears. The only downside is that they hurt ANC performance quite a bit because of the more open nature of the mesh.

I purchased these as replacements for the OEM leather ear pads that came with my Sennheiser HD 4.50BT headset, which had just recently begun to disintegrate after nearly 5 years of use. Installation wasn’t too hard, but you do have to get the edge of the material into the groove on the headset just right; otherwise, it will just slide right back off the headset. Unlike the original ear pads, these replacements comfortably fit my entire ear inside of them, without causing my skin to sweat nor did I have wear fatigue—even after 6hrs+ of continuous wear. I have found the noise cancellation to be fairly close to what it was with the original ear pads, although with the material being more permeable/breathable than the leather originals I’m sure there is some loss of noise cancellation there even if it’s negligible to my ears.

I bought these for the HD4.50BT cans. They are not the same shape as the OEM pads. They are also less pliable, making them too difficult (I won't say impossible) to install. Waste of time and money. I'm going to find the OEM replacements. The Sennheiser pad is on the left. It's more distinctly oval-shaped.

I have to start off by saying that getting these replacements on the headphones takes some technique. It is definitely no walk in the park. But once you figure it out, it is a little easier and faster. As for the quality, they don’t feel premium but not cheap either. A good in-between I would say. I do like the more spongy feel compared to the original “leather” ones that came with my Sennheiser 4.5BT headphones. The “leather” split open and began peeling off only after a couple of years of being carefully used for office work. These replacements already feel a lot more comfortable on the air and they seem to provide good airflow for long term use. This will impact noise cancellation, but for me it is worth the trade off so that I can wear these for hours without sweating so much or feeling pain/discomfort.

After a long search, I found these for my old but reliable Yapster TM-YB-100K (by TekNMotion). Fits perfectly, has same proportions for the pads, and is made of fabric. So many of these products are a leathery material, probably plastic, and I didn't picture that as very comfortable if you wear them a long time. They are very thick pads, and squishy. One comment: the instructions included with these are the worst instructions ever. They say to just put them over the headphone and snap them on. That is not how they are mounted. My suggestion is to pull out the plastic ring around them and stretch it while getting the pad on the earphone any way you can (it's a struggle but that's a good thing). The plastic ring is actually very elastic and designed to make the edge hug the earphone really really tightly so it is going to fight you. Once you have it on, go around it with your fingernail in the groove you will see in the earphone, which will make the plastic ring sink into the groove and snug up. Very tight fit, very neat.

Received these for Christmas, more comfortable and overall improvement. I have the Sennheiser 450BTs from two years prior, and the ear cushions were falling apart, with the gray PA leather material being very cheap and non-lasting, on top of the sizing not actually fitting anybody's ears and getting uncomfortable after just "sitting" on my ears. These fabric ones, however, are undeniably more durable, actually breathable, and the holes allow my ears to fit inside comfortably. The only downside is the very obnoxious fitting procedure, where you almost need three or four hands to properly hold everything down to get it around the headphones. Although this was annoying, it also ensures a very snug fit, ensuring they won't come off easily either. Sennheiser really should have just packed the factory headphones with a more durable pad such as these. Buy these if you are looking for a replacement or find the stock pads uncomfortable just like everybody else does!

Están muy cómodos para las orejas y al ser de tela, pues se sienten más frescos que los que vienen incluidos con los audífonos originales, lo único que si fue que me tardé como dos horas intentándolos instalar jaja, en realidad no es difícil, solo tienes que ser paciente y así aplica para todo en la vida :*

These ear pads have turned my Sennheiser HD 450 SE from good to awesome. They are so much more comfortable now and completely cover my (average size) ears. I can wear them for hours & hours without getting ear or head pain. The opening is much larger than the originals and therefore enclose my ears completely. ANC isn't noticably affected (as it's not good to start with) sound quality is still excellent. Highly recommended.

حلو

Make my HD4.50BT better than original. The original Ear Pads' design is really bad, too small and poor material, it only lasts some usage. This pad are amazing, bigger room for ear, comfort fibre. It is pretty easy to install.