KLIM Cool Universal Gaming Laptop PC Cooler - High Performance Fan for Fast Cooling Action - USB Hot Air Extractor - New 2022 Version - Blue

I have a Dell M6800, which means it's a very powerful portable workstation. I love my laptop. It does everything I need it to do.Problem is, it gets hot, very hot when I take the hardware to the limit. I'm talking frying eggs on the exhaust port hot. I'm not joking, I'm not exaggerating. It gets so hot you can burn your hands on it. Of course, that can't be good for the hardware in the long run and I do love my laptop (did I mention that). So of course I bought on of those laptop cooler pads (almost no difference), then I bought an even better laptop cooler pad (3 fans, how could you go wrong??) with very very little effect. The other day I almost burned my hand on the exhaust port and I thought I should really check amazon to see if there's anything else out there... and then KLIM came up. I was intrigued. I went with the metal version and I thought "what can go wrong? If it doesn't work, I can send it back". Oh boy... was I surprised. Installation takes about 12.5 seconds and you're up and running... and it's cool. figuratively and practically. What about hard facts? I got those too. My CPU usually runs at around 90-91 degrees Celsius under full strain. With the KLIM it runs at a rock solid 68 degrees Celsius. The KLIM metal casing does exactly what it's supposed to do. It works like a giant heatsink. The heat is nice and hot in the KLIM and NOT in my laptop. I use my laptop exactly like before, no weird pad underneath, no weird slant, you wouldn't even know it's there. I can wholeheartedly recommend the KLIM Cool Laptop cooler. (*smiles with a thumbs up*)

Pro: cools laptop quickly (I imagine that results will differ, but on my laptop the temp never goes above 45 when using this and never crashes or shuts down from overheating); if I did need to return this item, I feel like it would be very hassle-free as the customer service from KLIM seems great so far; noise isn't too bad, even on highest level (even if it bothers you initially I think you would get used to it, as I did, or else you can easily cover with music etc.); lights don't come on automatically (in reviews I have read of similar products, people complain about having to turn off lights every time you use device); very straightforward to install and use; will keep my busted old laptop running a while longer.Con: heavier than original KLIM Cool (was warned about this in description anyway), so a bit clunky to use, particularly if also using a cooling pad (I use the foam that came in the box to prop it up). Would give 5 stars if only the device had, for example, feet that could be folded out for this purpose.

KLIM - Innovative Cooling Design - Gaming Laptop Cooler - High Performance Fan - USB connection - Cooling pad - Air vacuumFirstly, I am a customer. I paid for this item and this review is independent.My laptop always has over heating issues and I was looking for a product to help.Temperatures often reached 80c plus, with the laptop shutting down if they reached 98c.So when I saw this in the recent lightning deals, I thought I would give it a try.First impressions were great. Immediately after purchase I received a very nice email from the seller, informing me of the shipment of the item and telling me about who they are. A few more sellers could learn from that approach.When the cooler arrive I had the cooler fitted within 2 minutes. You have to choose a silicon sleeve from the ones provided that best fits the outlet vent for your laptops cooling. Important note here as one other reviewer at least has pointed out, if your laptop has no outlet vents, then there is no where to add this and therefore it would be useless to you. Also, you have to plug this item into a usb socket (to power the fans in the cooler) so you will need a spare usb socket or nearby usb power supply (you can either use a spare socket on laptop or you can always buy a usb expansion device if you don't have a spare socket)So, all set up, power the cooler on by holding the power button down for a few seconds (2nd button clockwise looking at cooler from the end that sits closest to laptop). You can choose to display fan speed or air flow temp). I am writing this as my laptop is running the steam client, a usenet download client running at 40mbps and chrome). With those 3 running my laptop temp was 86c. With the cooler plugged in, it is now running at 40c. Wow ! very effective. Running sniper elite 3, the temp raised to 44c then dropped back down to 41c. I couldn't previously run usenet and sniper elite at the same time as the temp would reach 98c and shut my laptop down (I run a gaming laptop with an i7, a GT555M and 8GB ram)Build quality is fine. The cooler is built in China (isn;t most tech these days) and is made of plastic. Metal parts would certainly get too hot, and the plastic build is relatively strong and should survive general knocks. The display for temp/fan speed is clear and easily read, but not too obtrusive. The cooler obviously protrudes from the laptop. It sticks out about 5-6 inches,so you will need space for it.I noted another review where the customer received a defective item. It was good to see the seller has responded and offered to resolve their issue. Not all sellers bother, so well done Klim. No product is ever going to have zero issues. There will always be faulty items, that's the nature of modern tech, but how the seller responds (or even bothers) is important.I conclude that I highly recommend both the product and the seller.This is great value for money and I will happily buy another product from the seller

To be honest I was checking the temperature of my computer with and without this fan and I didn't see any change or improvement. The other thing that I don't like is the leds. I need to press 5 times in the button of this device to turn off the leds. It is not good because each time that I turn on the computer I need to do the same action.My recommendation is to include a switch button to turn on and off and keep the other button only to change the color of the leds.More problems:Weight - I created a support for this fan in order to stay with same height of my laptop. It is very very difficult to keep the fan near the laptop. The rubber expansion doesn't work.Metal cover - I notice that my cool was coming with dents in the metal.USB - In order to use everytime this fan you need to turn on with the usb cable. If you have a laptop with 3 or 2 usb ports you are removing one usb port from your computer that will stay every moment connected to the fan. My recommendation is to include a usb port in the device or include a usb with a male and female ports.The noise - OMG! the noice is incredible. Imagine sound of the fans of your laptop in the maximum and multiply by 3. It is better to turn on the music in order to avoid the sound.For the price that you are paying I don't recommend.

I was excited to test this product when I bought it. The signs of inferior quality showed up as soon as I opened the Amazon outer box: the small product's was barely open and the silicon sleeves were folded half way inside and out, like the box wasn't made for them. Result: they came a little deformed, luckily after 2 days on my laptop the sleeve adapted to its form and looks normal now.I got a little disappointed with the fact that once you stick the cooler on your laptop, you're bound to it. Maybe the manufacturer could review the product and think about a different mechanisms. For example: it could be divided in 2 pieces, the cooler itself and the base. So you could stick the base to the laptop but take the cooler out without needing to take the base out, if that makes any sense... After 4 days the sticking power is halfway gone even tho I left my laptop stationary on my table and the cooler properly supported underneath. Maybe it's just a cheap glue that don't resist heat exposure.Regarding the noise: Its not quiet and it's not loud. The only problem is that you CAN (since first time I turned on) hear the fan spinning, like the tip of it was always touching something...Well, at least the product works and my laptop doesn't gets uncomfortably hot next to WASD keys, but I still expected more. Instead of gaming at 80C it now works at barely 70C....Truth is, if there were coolers more expensive but with a higher quality I would pay for it. The only problem with this product is the price. It doesn't feel like it's worth £22,00. It should cost 12 pounds tops.I'm voting 3 stars because it works and I can feel because of the email sent right after my purchase that this company is open minded to improvement, so I leave here my honest review.

Ok first of all - and I will e-mail the makers this too - I recall KLIM being used a lot in WWII escape books like the Wooden Hors as it was a brand of dried milk sent to POWs and they used the tins to make tool and stuff. Or did I make this up but I want to know whey they picked this name for their company!Back to the product. Ordered yesterday, arrived today, and it's working as I type. Laptops are not my favourite form of PC as they do get hot, and IMHO too hot too, so anything that can cool them down is great. As per their own adverts, this is a fan in a box that sucks the air through the laptop, and tries to do its best. If I compare this laptop to a similar desktop, it's pretty obvious laptops need much more cooling, and this goes some way to doing it.It took 2 minutes to unpack and install; basically it's a USB powered external fan, but the cleverer bit is that it also is quite a big heat sink too, plus there are a range of rubber collars that make a good seal between laptop case and the fan. I started a graphics intensive game as I started typing this, and already the heat sink on the case is hot to touch, possibly too hot to touch. The heated air flowing out is hair drier hot.... I am happier pumping it out of the laptop instead of it frying my internals! I haven't read the instructions yet cos a) I am a man and b) it's pretty simple.I give 5 stars but it could be 6.....- the rubber collars suggest that most exhaust ports on laptops are the standardised sizes nowadays; please check if your laptop is one of the two widths catered for; if I have missed this info on the site here, then my fault.- the device is quite ok without all the sticky pads etc to glue it into its place; my laptop does travel, so I don't want an extra 5 inches stuck on one side. Luckily it sits wonderfully in place on my table with no help other than friction. Again KLIM may have worked this put already, but please make it obvious for potential buyers that the cooler can work very well with no glue pads at all, and have you also thought about velcro etc to make it removable anyway? A permanent attachment isn't what most laptop users want I suggest.- my exhaust port is on the right of the lap top; you might want to check this out as a potential buyer as to where the exhaust is on your laptop. As mine is on the right, the logo is inverted, plus the power socket is now is now facing towards my hand instead of away. The power lead can just about reach a USB on the far side of the laptop round the back but..... at the non USB end it's a stiff coaxial jack about 25mm long before the cable can bend.SUGGESTIONS:1- use the same power jack but put one on each side2 - provide enough info so we can choose to use an external power jack with a transformer3 - replace the coax jack with a USB C port in an ambidextrous position4 - replace the jazzy KLIM led and sculptured top of the device with a coffee cup warner; the things is that hot now I could fry an egg on it...Overall, glad I bought it, a good product, and I am not going to say here by how kuch it reduces my laptops temperatures because the seller shave already done all the honesty that is needed with their own advertising!

For me, I have an old Laptop, I've given it a lease of life with more Memory and a Samsung SSD drive. While it is an old HP Laptop, it still performs well, I have replaced the internal fan with a genuine brand new one, I have an under base laptop cooler also, and this KLIM does extract the remaining heat from this Laptop, from the side vent.It has helped improve the speed of this laptop, since I got this because my HP6910p (2011 model) which, as mentioned is old, still does a good job for what I need it for.My disappointment is, the internal fan from the KLIM, started to buzz on and off, this is after using compressed air from a distance as these things also give out liquid if sprayed too close, so, while it helped for a short while, the KLIM fan buzzing then became constant each time I turned on the Laptop and was very very annoying, so it went back for a replacement, so this is my second one, so far so good. My first KLIM lasted well up until Month 9, so I'll see how we go again, for Part 2 of this journey.22nd March 2022 -Part 2 of this journey hasn't lasted too well to be honest, being that this is my second KLIM Laptop Cooler fan, the buzzing which I'm guessing are apparent with these Laptop coolers is happening on this one too. However, I can't find another one that actually works as good as these and fits snug to the side vent to my Laptop. So, this second one is going back and I'm in for a third one.I shall update I'm sure in due course - with gritted teeth!!!18th Feb 2023 -It's not made it too 12 months yet, I use this KLIM Cool Metal Laptop Cooler Fan is starting to hum and buzz again. Not as bad as the last one but it's buzzing away, it is so annoying. There is not anything better out there, so I have no choice but to keep using this. You can't design and make these things where they don't even last the test of less than 12 months. I'll be speaking with Amazon again, as they give you the usual of, "I will assure you this new one won't make noise" if I had a penny for every time I heard that.......The item is good, no doubt, just to have it on, constantly hearing the buzzing, it is total continuous and does not stop, the spend for compressed air is a waste of money as the buzzing starts up not too long after that is used.This time I'll upload a video, I hope it's allows me to upload it....... I'm sure this sound would annoy anyone.I'll keep further updating......

DeliveryNo problems with deliverySetupTook out of box and a minute later it was on the laptop side vent pumping away. Only the sleeves were difficult to put on - my advice: hook it at one side, hold it at that point, and then pull it across the vent to the other side, further if it still hasn't hooked in.BuildYou get what you pay for. This has a strong light build, a powerful fan, not to mention a clever design. You have a choice of sleeves to match your laptop vent, and there is a sticky slab attached to the device that goes underneath the laptop to hold everything in place. I personally have not taken off the sticky slab sticker because I will use it on different laptops in the future. I could go on, this thing is a good product in short. Colour and graphics design wise I would have preferred something more low key. There is an engraving of a big spider underneath the device... why? The top is not too mad and the shaping is fairly nice too look at.Why did I buy?I have a laptop cooler pad as well as this but airflow wasn't good and didn't help as much as I'd had liked it to, this is because air escapes from the all the sides and it can block the air coming out of the side vent. My bro uses a i7 4510u laptop, 8gb RAM, and Intel 4400 graphics. This means when he plays games the processor is doing much of the work, and lately he's got into minecraft mods like Pixelmon. It uses up 60% cpu on average, can hit 100% easily and it takes up 4gb+ of ram. This all sums up into: a lot of heat production. He's had it a couple of times where the processor is throttled in attempt to control heat - down to 0.80GHZ. Uh oh.Results - Actual CPU temperature (not fan temp or stuff)With this on the max temperature of the CPU's never hits above 60c no matter what I hit it with.With this off, and using only the laptop pad, it hit 69c+ quicklyWith both turned off, it hit above 75c, and had I kept it going it would have started to throttle the processer.On average use CPU temperatures range about 28c to 40c. This is not bad at all considering room temperature was about 23c.These are cool temperatures in terms of CPU temperatures, and cool temps improve efficiency and the lifespan of the process and other components in the laptop. Would I paid an extra £10 for this product? Yes.. but don't tell KLIM that ;)

Same as described

Pure quality, great item!

Todo bien

El refrigerador KLIM Cool + es un producto excelente para la refrigeración de portátiles, que consigue una efectividad de refrigeración hasta 10 grados más de reducción de la temperatura que una base refrigeración, que un soporte con ventiladores.He añadido un vídeo donde muestro el refrigerador, su rendimiento y sus características. A continuación también lo explico y lo amplío en texto:Yo dispongo de la base refrigeradora VOXON y, al máximo rendimiento de mi portátil, al 80-90% de carga de CPU, con un procesador Intel Core i5 de hasta 3,4 GHz y 16 GB de RAM, las temperaturas se mantienen oscilando entre los 75 y 80 grados de temperatura, con la base funcionando al máximo rendimiento de sus 6 ventiladores a 1.400 rpm cada uno. Al usar el KLIM Cool +, con la base de refrigeración apagada, consigo temperaturas 10 grados menores, oscilando entre los 65 y los 70 grados. Esta temperatura la mantengo a pesar de tener 2 instancias de BlueStacks configuradas con 4 GB de RAM cada una, con máximo rendimiento gráfico a 60 FPS, o al jugar a juegos de PC que gasten bastante CPU y RAM, teniendo al mismo tiempo varios programas abiertos, tipo el navegador Opera, Discord, Spotify y Excel.Para medir la temperatura utilizo el programa Core Temp que ofrece datos precisos en tiempo real de la temperatura del procesador en sus 2 núcleos, en mi caso, así como la temperatura mínima y máxima alcanzadas, las cuales es mejor no fijarse mucho, ya que son picos puntuales. En las capturas de pantalla, que he subido en las imágenes, se puede comprobar la diferencia de temperaturas obtenidas con la base de refrigeración VOXON y las obtenidas con el KLIM Cool +, teniendo la base de refrigeración apagada. Para hacer la comparación he activado el KLIM Cool + durante unos 3 minutos a máxima potencia (unas 4.400 rpm), luego he abierto el Core Temp para que empiece a recopilar datos y seguidamente he abierto 2 instancias de BlueStacks y he abierto un juego en ambas, exactamente el mismo que tenía abierto en la captura de la VOXON, con los mismos programas secundarios abiertos. En la comparación se puede observar que sólo con la base refrigeradora VOXON activada, en un 81% de carga media de CPU, la temperatura estaba en unos 75 grados de media de los 2 núcleos (76 y 74), mientras que con el KLIM Cool +, con incluso una carga media de CPU ligeramente mayor, al 85%, estaba en unos 65 grados de media de los 2 núcleos (69 y 62), así que hay 10 grados de diferencia entre tener sólo la base refrigeradora VOXON activada o tener sólo el refrigerador KLIM Cool + activado. En la segunda captura de pantalla subida se puede comprobar justo el momento en el que hice la captura con sólo el KLIM Cool + en funcionamiento, en ese momento tenía las 2 instancias de BlueStacks cargando el juego, que es cuando gasta más CPU, ya que durante el juego baja un poco, y al mismo tiempo abiertos el Notepad++, el navegador Opera, el Word, el BlueStacks Tweaker, el Excel, el Core Temp y el Spotify, en total 9 de 16 GB de RAM en uso, y aun así se mantienen las temperaturas muy bajas, en 65 grados de media. En momentos de máximo rendimiento puede haber oscilaciones de entre 65 y 70 grados, lo cual es 10 grados menos que los entre 75 y 80 grados sólo con la VOXON. En momentos en que gasta menos CPU, pero con todos estos programas abiertos, puede reducirse a entre 50 y 65 grados, mientras que con la VOXON estarían entre 60 y 75 grados.Esta comparación no es para que no se compre una base refrigeradora, ya que, en realidad, lo ideal es combinar ambos sistemas, de ese modo no se necesita que ninguno de los dos trabaje a máximo rendimiento y se puede reducir el ruido general, se puede bajar de las 4.400 rpm, que hace algo de ruido, a sólo 3.500 rpm, que es bastante silencioso, y la base refrigeradora tenerla trabajando en un 60% o 70%, entonces el ruido es bajo y, si se está mirando la TV o escuchando música, incluso imperceptible. Puede usarse el KLIM Cool + como único sistema de refrigeración y será suficiente, pero combinándolo con una base refrigeradora, incluso de la misma marca KLIM, se consiguen las mismas bajas temperaturas, pero con menos ruido.El KLIM Cool + yo sólo lo utilizo cuando hago un alto consumo de CPU, básicamente cuando estoy usando BlueStacks, que es un emulador de Android que consume muchos recursos de procesador y memoria RAM, así como de la tarjeta gráfica, o cuando estoy jugando juegos que también requieren un alto consumo de CPU, RAM y GPU, entonces prefiero usar el KLIM Cool +, junto con la base, para así mantener unos 70 grados de temperatura en todo momento, que es una temperatura suficientemente baja para que los componentes del portátil no se sobrecalienten en ningún momento, lo cual previene los bajones de rendimiento que automáticamente los componentes aplican cuando se está alcanzando los límites de sobrecalentamiento, en ese momento los componentes reducen su potencia para así reducir sus temperaturas, causando pérdidas de rendimiento en el portátil, las cuales pueden ser molestas durante el juego, pues pueden haber pequeños cortes, el molesto LAG, cuelgues pequeños durante el uso del PC debido a que, tal vez, los componentes encargados de la transferencia de datos por Internet han reducido su potencia, o la tarjeta gráfica la ha reducido, o incluso la misma CPU o la RAM pueden ser los causantes, y todo ello básicamente por culpa de las altas temperaturas interiores.El KLIM Cool + lo que hace es aspirar el aire caliente del interior, en una potencia superior a la que los propios ventiladores de los portátiles pueden conseguir al expulsar aire, pues es más fácil conseguir una alta potencia en la aspiración que en la ventilación. El KLIM Cool + puede trabajar en una potencia de hasta 4.400 rpm (revoluciones por minuto) si se conecta a la corriente alterna con un cargador de móvil, si se conecta al portátil puede llegar a unas 4.200 rpm. Ninguna base de refrigeración con ventiladores puede conseguir los mismos resultados de refrigeración, porque la ventilación desde la base del portátil nunca alcanzará expulsar el aire caliente en la misma velocidad, por más potentes que sean los ventiladores, esto sólo se consigue mediante la aspiración. Los mejores portátiles del momento, con sus propios ventiladores, en momentos de alta carga de CPU, sólo alcanzan reducir la temperatura hasta entre 75 y 80 grados, similar a una base refrigeradora, por lo tanto, también 10 grados menos de efectividad que el KLIM Cool +.Se adapta a cualquier tipo de portátil que tenga las rejillas de ventilación en el lateral, que es lo más común, normalmente en el lateral izquierdo. Se incluyen gomas de distinto tamaño para que encaje correctamente. Si sobrepasa un poco no pasa nada, por ejemplo, en mi portátil, que es de sólo 13 pulgadas, las gomas abarcan las rejillas de ventilación y también el conector ethernet, pero como uso Wi-Fi no resulta molesto y no perjudica a la aspiración el hecho de que sea un poco más grande.Yo uso la base refrigeradora para soporte del portátil, en una inclinación de unos 30 grados, así que he necesitado un método de fijación para que el KLIM Cool + no se deslice hacia abajo, pues no queda pegado al portátil, sino simplemente ajustado. Para ello, he colocado 2 tornillos que coinciden con los orificios de la malla metálica de la base y esto impide el deslizamiento. En las imágenes subidas se puede observar esta manualidad que he aplicado. Junto al KLIM Cool +, en la misma caja, se incluyen adhesivos de sujeción que pueden servir en estos casos (en la imagen vertical subida se pueden observar), pero no son muy efectivos, pues con el tiempo terminan desprendiéndose y hay que recolocarlos continuamente, el único modo de asegurar que se mantengan pegados a la base sería usar una cola fuerte, pero eso estropearía la estética de la base, los tornillos son mucho más estéticos e inamovibles. En la parte baja del KLIM Cool + hay una pieza plana de plástico que ayuda a sujetarlo, una vez ajustado con el portátil, sólo con que se sujete unos 5 centímetros ya es suficiente para no ejercer demasiada presión hacia el exterior. Haciéndolo así consigo que el KLIM Cool + quede perfectamente encajado con el portátil y no se escapa nada del aire caliente que sale de las rejillas del portátil, aspira el 100%. En el anuncio se indica que en casos parecidos es mejor usar el modelo anterior, que es más ligero, pero no es necesario, se puede usar este último modelo directamente, que es más potente y mejor, y simplemente con un poco de ingenio conseguir un método de sujeción, en caso de tener una base de refrigeración con malla metálica el mejor método son los tornillos, en cualquier bazar chino o ferretería se pueden encontrar varios muy baratos que encajen perfectamente con los orificios, yo mismo en mi casa tengo muchos que encajan, escogí unos negros para mejor estética.Tiene una rueda giratoria para regular la potencia. Hay una pantalla donde se muestran las revoluciones por minuto en unos LED color azul y se puede ajustar según la necesidad. Yo sólo lo tengo a máxima potencia al principio, mientras cargan los programas, que es cuando usan más CPU, luego lo bajo de 4.400 rpm a 3.500 rpm, principalmente para reducir el ruido, ya que a partir de unas 3.800 rpm el ruido se reduce considerablemente y no resulta molesto. Para usuarios que no hagan un uso intensivo del portátil, que no estén usando herramientas de edición gráfica de alto consumo de CPU, o juegos de PC muy exigentes, y que básicamente usen el portátil para navegar por internet, mirar vídeos, escuchar música, escribir mails, Word, Excel y demás, se puede reducir a unas 2.500 o 3.000 rpm y, entonces, el ruido es casi imperceptible, incluso con la habitación en silencio. El uso de un programa de control de la temperatura del procesador, tipo Core Temp, es muy recomendado, para así ayudar a escoger el mínimo de potencia y reducir el ruido al máximo sin que el procesador supere los 75 grados de temperatura. Su alta eficacia hace que no sea necesaria mucha potencia, sólo con 2.500 rpm puedo mantenerlo en 75 grados máximos sin problemas a pesar de usar las 2 instancias de BlueStacks, Excel y Word al mismo tiempo, y no sólo es silencioso de este modo, sino que es más silencioso que el propio portátil, ya que la ventilación del propio portátil sí hace bastante ruido, pero el KLIM Cool + a 2.500 rpm es realmente silencioso. Con el Core Temp incluso se puede usar la opción de “Protección de calor” y configurar que a partir de 80 grados envíe una notificación de escritorio para avisar que hay que activar el KLIM Cool + o aumentar las revoluciones en caso de que ya esté activo, para así evitar perjudicar a los componentes del PC.Una vez que ya no requiero de tanta refrigeración, debido a que ya no estoy usando BlueStacks, ni jugando a ningún juego, ni editando vídeos, entonces lo apago y lo desencajo del portátil, dejando solamente encendida la base de refrigeración, para así mantener la temperatura suficientemente baja para que no se activen los propios ventiladores del portátil, los cuales son más ruidosos que la base. No es necesario usarlo todo el día, sino solamente cuando sea necesario. Lo ideal es tener también una base refrigeradora, ya que son menos ruidosas, especialmente las que pueden regularse y hacerlas trabajar al 50%, para tareas de poco consumo de CPU.La pantalla que indica las revoluciones por minutos puede alternarse con el indicador de temperatura, manteniendo el botón de encendido/apagado durante 3 segundos. Esta no indica la temperatura de la CPU, sino del propio aparato. Lo ideal es que se mantenga en 40 grados o por debajo, si se mantiene en unos 37 o 38 grados ya no hay riesgo de bajada de rendimiento de los componentes del PC.El diseño del KLIM Cool + está muy bien, así negro con cubierta de color cobre, recuerda un poco al diseño de un coche deportivo, tipo Lamborghini o Bugatti, así que no perjudica para nada la estética del escritorio.Como último detalle, el logo de la marca tiene unas luces LED que se pueden alternar entre verde fijo, verde débil parpadeante, azul fijo o azul débil parpadeante. Yo uso este último, ya que combina bien con el azul de la pantalla y es menos notorio.En conclusión, el KLIM Cool + es un producto imprescindible para un buen control de la temperatura del portátil y así prevenir bajones de rendimiento y alargar la vida útil de los componentes.¡¡Saludos!!

tek başına soğutması yeterli değil lap top altında 6 fanlı bir soğutucu ile birlikte idare ediyor. tavsiye etmem.