KOLIPI Acrylic Display Case for Collectibles, Clear Display Box 10x10x10 in

I bought the 10 x 15 tall case for displaying the Lego Stratocaster gifted to me at Christmas by the kids.. Great fit for the guitar and accompanying amp. I gave it 5 stars for value because... well, good acrylic cases aren't cheap and it's on the lower end of pricing I'd seen among similar cases; $70-$80 seemed to be the average price range. There are really inexpensive cases that ship direct from China but my experience has been that you get what you pay for. This went together fairly easily - no out-of-line holes, nice cleanly joined edges on the finished product. Well engineered and manufactured. The only reason it got 4 stars for ease of assembly is that the "nails" used are hard for large fingers to hold at the proper angle to insert, and that a large case gets a bit unwieldy and wobbly getting the second side on; you almost need a third hand. Granted, the printed instructions aren't the greatest; they'll suffice, but I found the video more helpful. And don't forget to take off the protective film prior to assembly! A pair of fabric gloves and a cleaning cloth are included, and I managed to get my case put together with nary a smudge. All told, a very nice case. I've had no issues removing the case from the stand to take the guitar and/or amp out, nor had any problems moving the case about to do dusting.

It's not bad. Okay it doesn't come with everything you need to put it together. Clear instructions if you don't have a brain dead moment like I did, but still clear instructions. Even comes with fairly nice gloves to put it together and not leave fingerprints during the assembling process. Size is just right for what I wanted it for VERY happy about that. The storage capacity I personally put with the size and it is just right. Gives some space without being to much exactly what I was looking for there. I honestly didn't need/want the lighting so I have it but it's not in the case nor do I want it in the case so I can't say anything about the lighting. Also I didn't think adding the lighting would allow for it to remain as sealed as it should be, so that was another reason for not adding the lighting. Also worried what the lighting might do to the item(s) inside, so also a reason I didn't add them. As for protecting the item within from dust and such. I'm not sure. It might work it might not can't really say, but I think probably it will. It seems that the edges are fairly tight so should do well protecting whatever is inside. It does take some time to put it together, and pulling off the protective plastic from the inside first seems to be the smarter way to go. Also remembering to pull off the plastic before you connect the pieces is helpful. Though I forgot on two sizes luckily it didn't seem to leave any behind when I finally noticed and pulled off the plastic after, so that was a relief.

Easy solution to protecting an object with minimal cost. Have a UGEAR clock that I wanted to cover. A glass dome was expensive, and I found this product. Perfect! It took about 30 minutes to assemble. Instructions were detailed enough and the quality of the pieces and box that it came in were great. The instructions said to start with the top panel first. I worked on a granite countertop (hard surface and clean to keep the panels from getting marked. I put the corner pieces on top and put the pin through the sleeve and put them through the hole in the top panel from the bottom and set it down on the counter and pressed down until I heard the snap. After completing that I took the side panel and installed the angle pieces in the same manner leaving the holes that would join with the top panel empty. Mated the side panel to the top piece and used the side of a butter knife to press the pin in until it snapped. Continued on until it was done. Kit came with cotton gloves, a wipe, and additional plastic joining pieces. It looks great! The panel holes lined up and there are no gapes between the panels. It fits in the base great and it serves the purpose well. Would buy another without reservation.

I am rather happy with the case. It was well packaged and easy to put together. I watched the video of how to put it together and that was good. The gloved that came with it were far too small for me, but I had nitrile gloves and they worked fine. I do recommend gloves. As another reviewer said it will attract dust like nothing else. You can feel the static cling coming off it. It was a little more flimsy than I expected. I was worried each time I put the pins in that the sides would break. But I took care and nothing broke. I have no idea how the lights are supposed to fit in the display. There is no hole for the wire to go through the sides or base, and it will not sit properly with wire going under the side. The string of lights is just a loose wire and there is not even a suggestion of how it is supposed to be placed. Had a heck of a time removing the protective cling film from the sides. But I didnget it in the end. All in all took less than 30 minutes to put together and it works well for what I needed.

I wouldn’t say this was hard to put together, but it wasn’t a piece of cake, especially having to wear the gloves. It made it very challenging to hold onto the little acrylic peg screw thingies. It’s definitely not going to help with dust protection because it is not sealed tightly at all, hence it being very flimsy. The size was as described. The clarity was great, minus a small scratch on one of the panels oh my god this thing. The base was definitely a good material. I don’t know how much of a value for the money it is but all in all it did the job and I’m not gonna return it because it took too much effort to put together that I didn’t want to have to take it apart! LOL!!!

Looks great and price is nice

Cool display case.. works well. A little tricky to setup.

This case was easy to put together but it didn't come with the extra sticky-tab supports for the corners so it was easy for the sides to pop out. Once it was together it did well but I wouldn't want to have to handle it lot. I only dust them as they are not where they can be touched so not sure how easy to clean. They dust off very well. The plastic could be a bit thicker but the size and the stuff we had to fit into it work well.

La calidad es buena, los paneles no cierran herméticos, pero si protegen del polvo, el ensamble es muy sencillo y vienen muy bien protegidos con sus plásticos Al principio parece que no son traslucidos pero, vienen muy bien pegados y por los dos lados. Buena caja por el precio

Excelente ,fácil de armar

dont buy this all the pins and holes dont match BIG scam and waste of money

La vitrina la compré para posar la figura Hot Toys de la Bruja Escarlata cuya escalada es de 1/6 pulgadas y quedó excelente. -El producto venía bien embalado, las instrucciones son en inglés y entendibles. Además de que no es difícil de armarla. -Viene con unas luces que no son la gran cosa. -El plástico es bueno para el precio, pero sí tiende a rayarse fácilmente. Si quieres una vitrina para figuras escala 1/6 a buen precio es una excelente opción mientras ahorras para alguna mejor. Además de que sí protege del polvo.

A bit expensive, but good quality