SUNLU High Speed PLA Filament 1.75mm, Meta Black 1KG Spool

The color is vibrant, consistent, and looks amazing on finished prints—exactly what I was hoping for. It has a smooth, rich tone that really pops, whether I'm printing small models or larger pieces. Print quality has been excellent. The filament feeds perfectly with no jams, and layer adhesion is solid. I’ve had zero issues with warping or stringing, and the surface finish is clean and professional-looking every time. It’s clear this is a high-quality filament, and it’s become my go-to for any projects that need a bright, eye-catching pink. Highly recommend for anyone who wants great results and reliable performance!

Great product, prints well

The Sunlu PLA Meta gives great results on a Bambu A1. This set is a great way to try many of the colors. I have also used the Plus and the Matte. The Matte is my favorite yielding a smooth, even finish. You would hardly know that something was 3D printed. My go to brand of filament.

This is an updated review after using 1/2 kilo. My first review for this filament wasn't exactly glowing but after working with it and getting the settings dialed in I've come to really like this filament. I initially complained about the flexibility of this filament but I'm not complaining anymore. This is some insanely tough stuff, once you get the settings dialed in this stuff is insane. While dialing in the settings for this filament I used a single wall calibration box file to tweak things, the final box was absolutely indestructible. This stuff created a single wall open top box that I could not crush or delaminate with anything outside of a bench vise. That same box run in Ovation filament was capable of being destroyed with bare hands, not this stuff. It literally took crushing it in a vise to destroy it and even then it simply crumpled instead of delaminating or snapping. I've now printed multiple thin walled prints with this stuff and I have zero fear that they will break or delaminate. I'm not a huge fan of how shiny this stuff is but I'll overlook the shine for the level of strength this filament displays. I'm still getting a fair amount of ringing on prints, I've altered settings left and right trying to eliminate that but it's been a no-go so far. Again, it's something I'm willing to overlook for the strength of this filament. While the listing here gives a minimum bed temp for adhesion the box states it's capable of being printed on a dead cold bed. I've found that to be untrue and it does need at least a temperature of 55°C to adhere properly. It seema to like a fairly high temperature on the hot end, 190°C, to run dependably but I've experienced zero issues with clogging of feeding and I'll happily run that hot to get the toughest prints I've ever made. Overall great stuff and another Sunlu product that makes me more of a fan of Sunlu than I already was. This stuff will be my go to structural filament as long as Sunlu produces it.

Starting off, I bought this filament because of it's affordable price tag, and almost no other reason. I was looking for ok filament for a great price, but what I got was far from that. First impressions where good, it shipped fast and came tightly sealed in a vacuum bag with an adequately sized discant packet unlike some other cheap filaments I've purchased. I first measured the diameter of the filament in about 20 different spots and found that it was within spec, also, unlike some other cheap filaments. I then began printing some test prints to test for moisture and found that it was good. Not only did the prints come out exactly how they should, they came out beautiful and bed adhesion was reliable and strong. At normal speeds this filament produces great results however at higher less reasonable speeds it still produces a "Usable print". Compared to some other filaments I've used this Sunlu PLA did very good at super high printing speeds. This is definitely high quality filament and a great value. The most pronounced benefit I can highlight about this filament vs some other cheap alternatives is that the bed adhesion is great. Many cheap filaments have terrible bed adhesion due to a variety of factors. Overall I'm pleased with this filament and could not find any major flaws in my spool.

Most worked well but the translucent was aweful threw most of it away as was very brittle. Wasn’t spun on roll well and got stuck often because of how was wound on roll

Great filament. It’s the only brand I use for my business now. Consistent quality. The color never changes from roll to roll.

Has worked well so far. No issues.

Filamento più robusto del PLA classico e facile da stampare. Colori pastello ben resi e superficie liscia. Ottima scelta per oggetti decorativi e prototipi. Difetti: resistenza termica sempre limitata come ogni PLA. 👉 Semplice, affidabile, estetico.

Das SUNLU Meta PLA Filament überzeugt durch gleichmäßige Wicklung und eine sehr präzise Durchmesser-Toleranz von ±0,02 mm, was für konsistente Drucke sorgt. Die verbesserte Zähigkeit und Flüssigkeit ermöglichen sauberes Drucken auch bei höheren Geschwindigkeiten, ohne dass es zu Unterextrusion oder Stringing kommt. Die rosa Farbe ist kräftig und deckend, ideal für Modelle, Dekorationen oder Prototypen. Das Filament läuft stabil durch den Extruder und haftet gut auf der Druckplatte, wodurch auch längere Druckjobs zuverlässig gelingen. Fazit: Ein zuverlässiges, hochwertiges PLA-Filament, das präzise, zäh und leicht zu verarbeiten ist. Perfekt für Hobbyisten und Fortgeschrittene, die schnelle und detailreiche Drucke erzielen möchten.

Buena calidad y las impresiones salen con un acabado excelente. Se nota que no tiene mucha humedad y el vacío ha sido realizado bien. Se agradece que incorpore carretes desmontables para que puedan ser utilizados con refills evitando gastos innecesarios de plásticos o cartón al tirar el carrete vacío

Parfait sur la bambulab p2s

Tutto ok, perfetti