Upgraded Tina2 3D Printer, WEEFUN Auto Leveling DIY 3D Printers for Beginners, Fully Open Source with Resume Printing, LCD Screen and Removable Magnetic Build Plate, Work with PLA/PLA Pro/TPU Filament

It is incredible piece of machinery doing exactly as described (I bought it as a Christmas present for someone), but do be careful about the yellow adhesive paper, as it's extremely tedious, yet essential, and delicate material, to put over the "black board" (unsure of the official name for it). Obviously when it comes to products, it's all about how you take care of them as well, so eventually, you will have to clean the nozzle using the pin provided in the packet. My only advice is to clean both the nozzle, and the "little platform" after each use. If you do print without the adhesive paper, then it will work for a bit, but gradually, the filament from the nozzle will immediately end up doing curls because it's struggling to find anything to stick onto. Also, do not create any files on the mircoSD card as the machine will not read it. If you are going to print a 3D hollow model, then use UltiMaker Cura (be warned, though, that it will ask to change the file type, otherwise you're good to go).With all that being said, it's worth the price! And very useful for wanting to understand 3D printing for a beginner.

I'll start by saying I'm brand new to 3d printing and thought it would be a steep learning curve so I opted to purchase a "starter" printer. The Tina 2 comes well packaged with everything you need for your first couple of prints. Software, tools, spares and filament is all in the box. I was set up in about 15 min. The software is quite simple to use, just select your 3d image, position it correctly and use the slicing function to generate the g code. The supplied SD card has a few test prints and I printed one straight away. Very impressed so far. I then jumped straight into a more complicated print with quite a lot of detail and it took about 3 hours to print but performed flawlessly. The print area Is quite small with the maximum height only being 100mm but it's enough for the smaller models that I need it for. It's a great little printer that just works with no fuss. It gets 5 stars from me and comes highly recommended, especially at this price.

This is a great little 3D printer. I use it with my CAD system to make models for my N scale layout. The printer settings allow for Fast to Ultra Fine Quality prints, temperature settings can be changed plus many other settings to get the print you need. To date I have designed and printed tunnel portals, a railway wrecking crane including bogie frames, front end loaders (see photos) and various other items. The detail achieved in really very good. It is also a very easy printer to load and use. The slicing software is simple to use and excellent.

I am new to 3d printing but wanted a versatile, affordable and decent printer to get started on. This appeared to be perfect for my needs. Upon unboxing I soon got started and had promising initial results. The unit itself comes as pre-assembled, easy to learn and ready to go. I got this to make wargaming miniatures and the associated scenery etc.I did my research and it appears that this model is capable of doing these things to a reasonable standard. I experimented and every thing I did was a misaligned unusable mess. I contacted the manufacturer and in fairness, they were Brillant. They gave me advice, instruction and guidance to amend my issues. I was reassured that things would work out. Alongside this I also did tons of my own research in the form of experimentation, watching YouTube videos and reading articles.After several weeks my issues were not resolved. We (me and the manufacturer) concluded that there was a physical issue with my machine. They assured me that we could tweak my machine and get it where it needed to be. In all honesty after weeks of stress and frustration I was burned out. This issue meant I had wasted weeks of my life (I work fulltime to my free time is limited) doing hundreds of tweaks and using lots of material for absolutely nothing.I bought this machine on the basis that it was ready to go and pre-configured. I did this to avoid all the tweaking of the machine so I could learn the basics as low stress as possible and get printing my miniatures ASAP. Because this was not the case I may as well have gotten a resin printer and started full on.This is no slight or attack on the manufacturer, they were and are Brillant and come as 100% recommended. Every product line has the odd defective model so this is no attack on them or their quality control. The machine itself is small, reasonably quiet and looks nice. It also appears to be good quality. The package comes with a small amount of the wire. I would highly recommend buying a large spool of the wire ASAP, and get a good quality one. I sent this item back and got a full refund so all ended well for me. My dream of cheap miniatures is over...for now!

They say the 3rd time's the charm, but for us, it seems it was the 4th time. 1st one (WEEFUN Upgraded Tina2) was very noisy but worked fairly well... for about 2 weeks and then it just quit. We returned it and got a different one (Voxelab Aquila C2 FDM 3D Printer). It took my husband nearly 2 frustrating weeks to assemble it and he never could get it to print anything at all. So back it went for the refund and we bought a higher priced one that was pre-assembled and supposed to work straight out of the box (FLASHFORGE Adventurer 3 Lite FDM 3D Printer). It worked for about a week and printed around a half dozen things and the filament feeder quit. My husband tried purging it etc. but no go. So back it went for a refund and we ordered this one (WEEFUN Newest TINA2 S 3D Printer, Ultra Silent Mainboard with WiFi Cloud Printing, Mini 3D Printer Heatable PEI Platform, Auto Bed Leveling DIY 3D Printers with Resume Printing, Fully Open Source). It prints well and is super quiet. We've had it a week now and already printed more than with the other 3 combined. It might not be as large as we'd like for some things but seems to be better quality (knock wood and cross fingers).*Edit* Nope, spoke too soon! Two months in the filament feeder clogged and wouldn't feed the filament through it any longer! I contacted the company multiple times asking them to honor their warranty and their response was for me to go to a YouTube video for instructions on disassembling it and fix it myself! I am not a technician and do not have the necessary knowledge, ability, or tools to do so.*Edit* I ordered this item, (WEEFUN Newest TINA2 S 3D Printer, Ultra Silent Mainboard with WiFi Cloud Printing, Mini 3D Printer Heatable PEI Platform, Auto Bed Leveling DIY 3D Printers with Resume Printing, Fully Open Source), on 1 Feb 2023 and received it around a week later. It completely stopped working on 2 Feb 2025, ONE DAY AFTER THE WARRANTY EXPIRED!Purges but then won't print! Says nozzle heating failed, printer halted please reset" I tried to reset, didn't work... still wouldn't print!. I tried restoring to factory settings, didn't work... still wouldn't print! I tried leveling the pad... didn't work... still wouldn't print! I tried auto-home... didn't work... still wouldn't print! WEEFUN3D Support was none responsive.

This little printer is absolutely brilliant for beginners, kids or people who want to 3D print but don't want a huge big printer taking loads of space. Its very compact and the build volume of 100mm x 100mm x 100mm is fine for most bits a beginner might want to print. Its very easy to use and setup and the print quality is excellent with absolutely no problems with adhesion, you can just print using the app on your phone if you like or those who are more adventurous can draw their own items in CAD or download pre-drawn parts from others using library sites, literally millions of models to try - you can even generate models from photographs using the AI feature in the app. I've printed parts in both PLA and PETG and everything from fidgets to bench vices, I am so impressed with this little printer would highly recommend its excellent value.

So far so good bought for my son’s 8th birthday as he’s obsessed with 3d figures and wants to make his own . It’s very user friendly and can use straight from the app , only done a couple had 6hrs run time so far and no issues … you will need to buy more colours though . Good for beginners and kids

I recently found a small plastic part on a machine that I use regularly had broken off and rendered it useless.I was about to fix it with some epoxy resin and a sharp knife when somebody mentioned to me that I might consider a 3D printer to replicate the part. The machine I was trying to repair was worth £150, and this printer cost £170, so it was a no-brainer as I could use it for multiple tasks in the future if I could master it (and I have plenty of these tasks).I haven’t done Computer Aided Design since about 1984 (when it took the best part of a week to ‘draw’ something on a mainframe computer). I got out of that game shortly afterwards and got into accountancy, so haven’t designed anything since, other than on paper (my old Technical Drawing O-Level never left me).It still took me a day or so to get my head around the software for 3D printing (TinkerCad, and then the WeeFun proprietary download), but once I understood the principles, I could design something in about 10 minutes; something that would have taken seven days some 40 years ago!I did a bit of research and landed on this machine because it seemed to have good reviews (it wasn’t in the Black Friday deal, but had better reviews than the machines that were). It may be perfect for children who can absorb tuition relating to these, but it’s also an excellent bit of kit for us grown-ups for making small parts that happen to break around the house.It's not the largest machine, but its perfect for small jobs.If I were to buy it again, I would probably spend another £20 and buy the WiFi version to save on having to remove and insert the memory card which worries me in case I wear it out.I did struggle slightly with getting the software to open on my Mac because it wasn’t recognised as ‘safe’, and the manufacturer’s website was a bit lacking with regard to instruction, but on the whole, it was a very positive experience.The machine doesn’t come with a dust cover, but a supermarket carrier bag overcomes this.For me, this gadget will pay for itself in a matter of days as I regularly have to buy small parts for stuff, and only just discovered that there are online libraries of useful things to print (Thingiverse). I can't understand why I didn't buy one of these machines years ago.

bevor ich auf den Drucker eingehe..ca. 2-3 Tage nach dem Kauf hab ich vom Kundenservice eine E-Mail bekommen,in der man sich nach mir und meiner Zufriedenheit erkundigteund fragte ob ich Schwierigkeiten mit dem Drucker habe..und ja ich hatte tatsächlich Probleme..E-Mails wurden zeitnah, in einem guten deutsch, und stehts freundlich beantwortet,man war stehts an meiner zufrieden interessiert, und sehr bemüht mit mir eine Lösung zu finden..auch im späteren verlauf wurde sich nochmals erkundigt wie es mir geht und ob alles funktioniert..vorbildlicher Kundenservice..einfacher/ günstiger kann man nicht in die 3D Drucktechnik einsteigen..ich selbst, habe mich damit nicht beschäftigt oder vorher darüber informiert, nichts der gleichen,ich hatte von heut auf morgen spontan den Gedankengang,wie cool es wäre sich mal so eigene ausgefallene Deko in 3D zu drucken,und habe mir den günstigsten Filament-Drucker bestellt den ich gefunden hatte..(auch im Modellbau ist ein 3D-Drucker ein Segen)man muss auch nicht mit 3D Programme umgehen können, um 3D Dateien zu erstellen,im Internet gibt es etliche Druckobjekte aus allen möglichen Bereichen..recht schnell hatte ich den Dreh raus und wurde vom 3d Druck Fieber gepacktund meine Drucke wurden mit wachsender Erfahrung immer besser..auf die W-LAN Funktion kann man verzichten, das Geld kann man sich sparen,oder besser noch in eine Rolle Filament investieren, denn das braucht ihr, am Anfang sowieso,und nach den ersten Erfolgen erst recht, wenn euch das 3D Druck Fieber gepackt hat,die W-LAN Funktion, funktioniert nicht wie in der Anleitung beschrieben,ist recht kompliziert und ähnlich wie bei smarten Geräten,ist sehr langsam und wenig stabil, und die Handy APP überhaupt nicht zu gebrauchen,mit SD-Karte funktioniert sehr gut und an den Drucker muss man sowieso,Druckplatte vorbereiten, Filament dran hängen usw., die W-LAN Funktion bringt kein Vorteil..das Drucker-Menü lässt sich auf Deutsch stellen,und ist sehr Benutzerfreundlich und leicht zu bedienen..die beiliegende Software WiiBuilder, Installation ist in Englischund im Programm kann man auf Deutsch einstellen, ist sehr Benutzerfreundlich und kinderleicht beschränkt sich auf das nötigste ist auf den Drucker konfiguriert, man wählt sein Drucker (TINA2) einfacher geht nicht..für Fortgeschrittene liegt noch Cura auf der SD-Karte, ist aber auch sehr Benutzerfreundlichund Einsteiger tauglich, auch auf den Drucker konfiguriert, (auch hier Drucker auswählen Tina2) Installation und Programm in Deutsch..ich habe beide installiert und nutze beide, am meisten aber tatsächlich WiiBuilder,es ist sehr einfach, geht schnell, und funktioniert gut..die Montage des Druckers kinderleicht, Transport Sicherung entfernen,und Schlauch für die Filament Führung anstecken..mitgeliefert wird alles was man für den Start benötigt, SD-Karte mit Software,USB Adapter für die SD-Karte, kleine Rolle Filament (von guter Qualität),Ersatzdüsen, Kleber für bessere Haftung auf der Druckplatte, Klebepads zum Schutz der Druckplatte..die flexible magnetische Druckplatte lässt sich einfach undunproblematisch im Drucker platzieren und lösen, und die Drucke lassen sich einfach lösen..Filament ist mittlerweile günstig zu bekommen,und mit Filament drucken ist unkompliziert und einfach,und gegenüber Resin drucken gesundheitlich nicht so bedenklich..je nach Filament, Druckobjekt, Druckergebnis, und eigenen Ansprüchen,müssen die Drucke gegebenenfalls nachbearbeitet werden..der Drucker ist sehr kompaktund findet auch auf dem Schreibtisch neben dem Monitor ohne Probleme Platz,wenn man den Dreh raus hat sind die Drucke ganz ordentlich,die Druckqualität ist auch vom Filament abhängig,in der Druckgröße ist man schon sehr eingeschränkt, und Details sind demnach nicht seine Stärke,in der Höhe sollte man unter 9,5cm bleiben, in der tiefe unter 11,5cm, und in der breite unter 9,5cm..die Stepper Treiber machen ordentlich Geräusche, wie ein altes Modem, stört mich jetzt nicht,aber wem es stören könnte sollte das bei der Wahl des Standortes einplanen,anderes Zimmer, Keller oder Hobbyraum..während des drucken zeigt der Drucker die verstrichene und die verbleibende Zeit an,im Programm wenn man seine Datei für den Druck erstellt hat,kann man auch sehen wie lange der Druck dauern wird, und wieviel Filament benötigt wird..

I recently purchased this printer from Amazon and I am very pleased with it. (1) The printer was easy to set up and the instructions were clear and easy to follow. (2) The built and print quality is excellent and the build volume is more than enough for my needs. (3) The printer is also very quiet while in operation. (4) I have had a few issues with the software, but customer support was very helpful in resolving them. Overall, I am very happy with my purchase and would recommend this printer to anyone in the market for a 3D printer.Ich habe diesen Drucker kürzlich bei Amazon gekauft und bin sehr zufrieden damit. (1) Der Drucker war einfach einzurichten und die Anweisungen waren klar und leicht zu befolgen. (2) Die Bau- und Druckqualität ist ausgezeichnet und das Bauvolumen ist mehr als genug für meine Bedürfnisse. (3) Der Drucker ist auch sehr leise im Betrieb. (4) Ich hatte ein paar Probleme mit der Software, aber der Kundensupport war sehr hilfreich bei der Lösung dieser Probleme. Insgesamt bin ich sehr zufrieden mit meinem Kauf und würde diesen Drucker jedem empfehlen, der einen 3D-Drucker sucht.

Ho acquistato questa stampante quasi un anno fa, mi trovo a scrivere una recensione ora per confermare che il prodotto è validissimo, per chi come me sta iniziando in questo mondo.Dutante questo periodo ho contattato due volte il supporto, una volta per un problema post aggiornamento del firmware e mi hanno aiutato nella risoluzione, la seconda volta li ho contattati per un guasto e dopo pochissimi giorni mi hanno inviato una nuova macchina.Top!

Der Drucker ist super, ich habe momentan zwei Tina2 in Einsatz, einen älteren ohne "s" und den zweiten - mit "s". Beide machen ihre Arbeit richtig gut - die neuere Version ist etwas schneller und was ganz wichtig ist - viel leiser

Premetto che è il mio primo approccio ad una stampante 3d per cui parlo da profana che la ha comprata per fare hobbistica. Il software è intuitivo ed abbastanza facile da imparare ad usare (se avete già nozioni base cad sarà una passeggiata). ho già realizzato diversi oggetti e vengono molto carini, si vede un pochino il passaggio degli strati ma presuppongo sia normale per una stampante 3d di questa fascia di prezzo.