STAND-V002F Dual LED LCD Monitor Free-Standing Desk Stand for 2 Screens up to 27 Inch Heavy-Duty Fully Adjustable Arms with Max VESA 100x100mm

this is the second of this type I have bought. These work well with a desk that you are unable (and unwilling to drill a hole) to attach with a clamp on the edge of the desk. It was easy to put together and is quite sturdy for two large moniters. It serves the purpose of freeing up some deskspace

I bought this because my new company was dragging their feet on getting me arms for my monitors. I am tall, so I have always needed my monitors raised. The desk has limited space, so cheaper riser options were not great. I did not use this apparatus immediately but once I did, I was extremely happy! It is very minimal looking, actually much nicer than the ones the company would have used. Maybe not as 'sturdy' but these are sturdy enough and for the price they are doing the job perfectly! Easy to assemble. I am not able to use the either of the 2 mounting options since this is an office desk. The hole in my desk for mounting such hardware is not reachable with this. I could use the screw down but would need to drill a hole in the desk. I use it without the mounting which, at first, I thought was going to be a problem as the monitors kept tipping forward when I was adjusting them to the height and forward position I desired. I was successful in finding the "sweet spot" that spot where the monitors are perfectly aligned and do not tip forward! Love it! Sleek, black, minimalist and functioning great! Definitely recommend and for the price?? If your company is stingy and reluctant to help with ergonomics (even tho they claim to be all for it and helpful...NOT) these work wonders.

Pros: Easy to assemble. Great range of motion. Cable management built-in to keep things neat in the back. Everything is metal, so very sturdy. With two monitors on a single stand, this frees up desk space underneath for other things. Cons: need tools in order to make adjustments. Fortunately, it comes with the necessary tools. Wish it had notches in some of the adjustments like height and tilt. For example, the height adjustment depends on friction to maintain its position. Have to tighten the bolt really tight so the monitors don't slide down. Same with tilt. Have to make it really tight so the monitors don't tilt down. Problem is, not sure how tight it the right amount of tight. If you over-tighten the bolt, that makes it harder to loosen in the future if you need to re-adjust it. I attached two 24" monitors and with the monitors side-by-side, the arms stick out around 7-8 inches behind. Since my desk is up against a wall, this prevents me from pushing the monitors against the wall. Since my desk isn't that deep to begin with, the monitors are closer to my face than I would prefer. Two 27" monitors would probably be a better choice so the arms are spread out wider. Suggestion for buyers: assemble the whole thing, including the monitors, flat on the floor. This way, the arms will be balanced when placed upright. Despite negatives, the stand works for me and I would buy it again. I would probably pair it with a couple of 27" monitors instead.

This has held two monitors for the past 4 years and is still in perfect condition. It’s exactly what I needed and still to this day couldn’t be more happy with it. It’s very sturdy, but if your monitors are positioned more forward, like anything that requires a bit of balance, it’ll become forward heavy and want to tilt over. So just make sure you position them properly. The quality is great in my opinion. It’s solid metal and hold my monitors very well. I’ve never had an issue with that. It’s a simple, black design that goes well with the rest of my set up so I really like that as well. You can also tilt your monitors to or away from you, adjust the height you want them (they’ll both be at the desired height), and it comes with cable clips so you can do some cable management.

This stand is affordable, durable and exactly what I was looking for. The instructions were clear; you can move your monitors around as needed as well as adjust the height. By lifting up my monitors this allowed for ample usable space on my desk that I desperately needed. There is a cable management system that runs on the back of the stand and is very useful in making your desk not look so cluttered. This looks great on my desk, and I wish I had known about this product earlier. I never realized how much space I was losing at my desk. I also have the vivo standing desk converter with this monitor system and it works great

Full disclosure: I ended up taking this back, but it was totally a case of "It's not you, it's me." This stand is FANTASTIC and you should totally buy it. The reason I got it originally was because I found a 32" smart TV locally that I couldn't pass up; at the time I had a 24" TV and a 20" monitor, so I decided to try doing the 32" TV as a regular TV with my 24" TV as a "monitor" for my computer. My vision isn't the greatest, so the 24" TV wasn't doing great for me as a monitor, and the 20" monitor I have (an older Acer) doesn't have a VESA mount. So it was either buy a different monitor, or get a different stand, and I opted to go back to my old setup for my monitor but buy a VIVO Single Monitor stand for my 32" TV. Back to this stand's information: They give you all the parts you need, and although there are several steps and different types of screws & wrenches involved, I was able to put things together without much trouble. My only complaint is that I wish they had arranged things in the bags better during packaging so I didn't have to figure out what size screws and Allen wrenches things went to. Other than that, once I figured out what size of things went to what, it was totally fine thanks to their instructions. I loved being able to adjust the tightness of the arms and tilt angles, etc with the Allen wrenches; very awesome, and I wish the VIVO single monitor stand was that way instead of using an actual wrench with a nut/bolt situation. Once I got the TVs situated the way I wanted to, everything was steady with no danger of tipping over. I would totally trust this for the setup I had again if I had the right monitor to match the VESA mount. All that to say, this is an awesome monitor stand, and you should totally get this if you're looking into a dual-monitor setup that meets the size & weight requirements for your monitors. Thanks for reading!

Im one to never review things unless they are extremely good or extremely bad. I am pleased to say in this case that it is because it is extremely good! The stand is extremely sturdy without mounting it and using it with just the weighted base. It was really easy to put together, only had to put in 3 screws for the base and 4 screws each for the monitor mounts (i actually used the ones provided with my monitor instead of the ones they sent, but the ones they send looked nice enough.) The monitors slid into place easily and there is one nut to secure it on the stand so you dont unhook it when you adjust it. Once you make your adjustments you can tighten the bolts with the included allen wrenches to lock the stand in place. You can then even store the allen wrenches in the included wire clips for future use! I am also just amazed at how much space it freed up on my desk. The ONE WORD OF CAUTION i have is that when attaching the monitors, after putting the first one on it tends to tip over. So between putting the first and second monitors on, either have a buddy hold it steady, or in my case, help weigh the base down more with a ream of paper or a heavy book. Once the second monitor is on, the stand is way more steady then i would imagine. Overall this is a really good stand for the money and i would recommend it to anybody who needs one!

After a couple of day's of use, I gotta say that it does the job. It's pretty good, I have two monitors, one is more recent than the other and they fit well. I do have to mention that one is heavier than the other but that doesn't seem to be an issue, it all works well. Another thing that I have to mention is that the arms are really hard to move, I am sure you can loosen up the joints but the way I have my monitors is all good. One thing that I didn't like was that the screws that were for the back of the monitor were too large for one of them(monitor), and I had to use my own screws. And the plastic things to hold the cables aren't that strong and one of mine broke really easily. Also, i ordered a brand new one but one of the arms looked damaged, it was all scratched up like if it was dropped on the floor and put back on the box. If I knew the condition that I was going to get it in I would have probably bought a used one, at least they'd be honest about it. The stand is pretty sturdy but when moving the monitors all the way forward, it becomes unbalanced and it falls almost breaking both the screens. The design is good but the stand is horrible it looks so ugly, it feels way bigger in person than what it looks like in the pictures. It is not a modern design and I'm not sure what would be but it looks bad xD... I just try to ignore it. Lastly, the monitors still shake when touched, it isn't like having it exactly mounted it wobbles. Overal, for the price I don't feel like it's worth it maybe $5 or $3 less would have made a big impact and it would have been definitely yes. Buy at your own risk, just don't expect something great, it's very cheap.

Received this 3 days back and set this up immediately. No issue with the product in terms of assembly, linkages, adjustment, stability. There is a minor scratch on the base though which is not a big issue to me. I assemble this and set this to roughly the height and position i want by measurement before putting the monitor on. After the monitor is put on, minor adjustment to get them to exactly where i wanted. No issue in the process. In terms of stability, i set this up to a W configuration with the 2 monitors as close to the vertical shaft as possible. This has an advantage of saving desk space too with the monitor all the way back. With this, the stand is very stable. All in all, very happy with the purchase.

خيار رائع جدا للشاشات ركبت عليه شاشة ٢١ انش و٢٤ انش وجدا مناسب وعملي ومفيد عيبه لازم توازنه وتركيبه ياخذ وقت اخذ مني ساعتين تقريبا

Helped me clean a lot of clutter lying around on my desk which was too small for placing two monitors in addition to the usual accessories. No complains!

works perfect if you have the monitors flat it stable but if you angle the monitors the stands fall down. its basic physics. the stand is perfect when you add weight to it to ensure it doesnt fall when you angle toe monitors to far forward.

The stand was delivered well-packed, but it was damaged nonetheless. It had either been used before, or the coat of paint is very weak. Additionally, the screws were too tight, and due to their poor quality, they got damaged quickly after I tried to loosen them a bit (in order to move the monitors slightly during usage). The stand's balance is fair, but I wouldn't leave the monitors on a desk that might occasionally be bumped by a child or an animal. I'm going to keep it because I have no other option; I need to continue working. Otherwise, I would have returned it.