SaluSpa Battery Powered LED Soothing Spa Waterfall Accessory Attachment with 7 Color Changing Lights for Bestway AirJet & AirJet Plus

Excelente material, realiza su funcion sin problemas.

It does fit the Saluspa Miami and it’s great! If your spa is filled and you go to install thinking it’s not compatible, grab a rubber can opener (or anything rubber that you can grab something with - you do you) and go outside. Take off the chlorine/bromine distributor and you’ll see a plastic dome with holes all over it. That is what needs to come off. Grab it with your rubber jar opener and twist left. The entire grey piece will come off. That is where you will insert the attachment piece but screwing it in. Make sure you’ve inserted 3xAAA into the head of the light first (I used a small hobby screwdriver), and then put the magnet side down into your hot tub. It’ll click onto the magnet and voila! You’ll have a nice little waterfall situation that shoots about 3/4ths of the way across the tub. Love how easy it is to remove to cover the hot tub back up and seems to be worth the $45 if you want to feel fancy.

This is a total waste of money. I received mine without any instructions or the fitting that is magnetic. Also, it was dirty and had dirt and scuff marks on it like somebody tried to run over it! Not. Even. Usable.

Very hard to screw into spot where it attaches. It’s just ok when using it. We don’t have a big hot tub and it splashes in face no matter where you sit. Wouldn’t order again, especially so high priced.

I was really excited about this. Instructions are pointless, so I just read reviews and tips, super easy to install with reviewers help. My main issue is the sprays almost to the other side of the spa and splashes a lot of water outside of the spa. There is no way to adjust this, also you lose the stationary chemtab space and have to opt for a chem bobber in your spa, fyi. I think this might work better for larger spas. My waterfall had a lot of pressure , sprays too far splashes on your face and makes it not relaxing. The light feature doesn’t have a big impact as it’s outside the water and doesn’t really light up the water much.

For whatever reason the instructions are in back of paperwork sent but if you overlook them as I did at first here are some simple step by step instructions. 1. Remove chlorine feeder and it’ll exposed the other piece needing removal. 2. For the other piece you will need a small set of pliers to get cover removed. Just turn counter clockwise and it’ll come out pretty easily. 3. Remove fountain fitting from unit. It’s a magnet so just a slight pull and they disconnect from one another. 4. Install the fountain fitting in the open port. 5. Before installing unit make sure you put the batteries in it. 6. Simply place the fountain onto the new magnetic fitting and enjoy. Mine is shooting to roughly the middle of the spa which is nice. If it’s not going as far you may need to clean or replace the filter unit. The sound adds to the comfort and relaxation in the spa. Would recommend to anyone else.

This so-called "waterfall" add-on attaches to the water output of your spa, and provides a small arch of water to add character and visual effect to your spa experience. What they don't make obvious is that you must remove the brominator assembly to attach this. Of course, you always have the option to use a floating brominator instead, which is what I chose to do. That way I can leave this attached all the time. The unit features a built-in, battery powered LED light. The light can shine in various colors or white. I use little puck lights in my spa to add color, and the LED on this compliments them well.

The batteries are only for the light show—the waterfall/water fountain effect is caused purely by the pressure of the filtration system, so make sure to keep your filter clean. I would recommend a power drill to unscrew the panel covering the batteries. Some on here have said to use a wrench to undo the filter cage part on the inside of the tub, but I found that a rubber jar opener mat worked just as well. The arm comes off the magnet base easily once installed.

si j'ai bien compris le montage, cela se monte sur la boucherie du diffuser de pastilles, alors aucune pression, et là hauteur est beaucoup trop basse, la sortie de l'eau est d environ 10cm.

I love this fountain for my hot tub! It works very easy and just snaps on with a magnet. The only thing that I think would make it better is if the lights would change and flash intermittently. It does change the ambiance of the hot tub and makes it look sexier! Also where it attaches is a place that you do not want to sit anyways because it has the parts that stick out in that area anyways.

Super schnell, gerne wieder👍

Facile da montare divertente ma poco adatto per bambini vivaci

Ich habe den Wasserfall für meinen Lay-Z-Spa Miami gekauft, der vorranig von meinen Kindern genutzt wird. Die Lieferung war ganz flott, Aufbau war auch kein Hexenwerk. Original-Austritsdüse ausgeschraubt, Kugelgelenk des Wasserfalls angeschraubt, Wasserfall an das magnetische Kugelgelenk angeheftet und fertig. Soweit so gut. An dieser stelle wurde mir dann auch klar, warum die Bewertungen nicht überragend waren. Zwei Punkte, die die Nutzung aus meiner Sicht unmöglich machen. 1.) Die magnetische Kontaktzone besteht aus einer glatten Kunststoffpaarung. So glatt, dass der Wasserfall auch bei leichten Wellen umfällt und im Pool liegt. 2.) Der Strahl ist so stark, dass er die gegenüberliegende Pool-Wand trifft und ein großer Teil hinaus spritzt. Flacher stellen ist möglich, nimmt aber den ganzen Charme. Mit einem kleinen Upgrade konnte ich glücklicherweise beide Probleme lösen. Ich habe drei kleine doppelseitige Klebepads (UHU patafix) an die Kontaktfläche geklebt. Die gummiartigen Pads sorgen für mehr Haftung, sodass der Wasserfall nicht mehr umfällt, sondern über das Kugelgelenk gedreht werden kann, dass etwas schwergängiger ist. Da die Pads etwa 0.3 bis 0.5 mm stark sind, tritt durch den entstehenden kleinen Spalt ein Teil des von der Pumpe kommenden Wassers aus. Damit ist der Druck oben nicht mehr so stark und der Wasserstrahl geht nur noch bis etwa 2/3 des Pooldurchmessers. Ich verzichte durch die Pads auch auf das Entfernen, wenn ich den Pool abdecke und drehe ihn nur ins Wasser. Durch den kleinen Strudel reinigt er auch deutlich besser, wie ich bei einem Filterwechsel sehen konnte (1min und das Wasser war wieder klar). Mein Tipp an den Hersteller. 3 kleine Gummifüße an der magnetischen Verbindungsstelle vorsehen, und alles ist gut (muss ja nicht beidseitig klebend sein, wie bei mir). Eventuell kann man das auch durch andere Polung der Magneten lösen. N und S immer im Wechsel sollte das Verdrehen ebenfalls hemmen. Dann solle aber trottdem irgend was Druckmindernes mit verbaut werden (kleine Kanäle als eine Art Bypass z.B.)