3 Pcs 15.6 Inch Anti Blue Light Screen Protector Compatible With Lenovo Hp Dell Acer Asus Samsung etc Laptop-16:9 Aspect, 15" Computer Monitor Glare Filter Uv Blocker Shield Cover Eye Protection Film

I originally wanted to protect the screen on my new lenovo thinkpad with a glass protector but they're all glossy and I wanted to keep the anti-glare finish. After some research I decided on this one. The material was thicker and stiffer than I expected, not a film but more like a sheet of hard plastic. This improves protection so I'm pleased. The sizing fit my 14" 16:10 screen perfectly, about 1 mm gap at most between edges. The finish is more matte/dull than the original anti-glare, and further reduces glare. This comes at a cost of slightly reduced text crispness. Pick one: crisp text and glossy/reflective, or softer text and low reflectivity. Screen colour remains rich and beautiful. The product claims to reduce blue light but I don't notice a difference in colour, which is perfect for me. I've attached several photos of the screen taken in a sunny indoor location with the protector attached. You can see some glare on the left side but overall it's pretty minimal for the amount of sun it's receiving. Application Directions and provided stickers for alignment were adequate. Perfect application is always a pain but it's straight-forward. I messed up the first one. I cleaned the screen thoroughly, first with a little dish soap and warm water using a microfibre cloth, then the alcohol pad. I couldn't see any dust so I started applying the screen. Of course about 2/3 of the way through there were several dust bubbles so I aborted and started with a new sheet. The second screen went on almost perfectly. Because the material is stiff it's difficult to maneuver at the end and the application sticker popped off and the last 1/8th of the screen came down before I could squeegee the bubbles. It sticks well so I couldn't lift it back up without risking damaging the finish. I managed to get all but one small bubble out which stubbornly refused to move to the edge of the screen using the squeegee. The next day I worked on it by gently rubbing in circles with my clean dry fingers and it seems to have disappeared. I did this with the screen on for a while to warm up, this might've helped. Be very careful doing this, don't apply much pressure and support the back of the screen with your hand to prevent flex. My advice for application is to place a thin piece of clean plastic (e.g. guitar pick) on the screen edge on opposite side of where you begin to apply the screen. That way if it drops suddenly, there is something to prevent it from closing too early, leaving trapped bubbles. Overall highly recommended if you want extra protection. Remember, there are drawbacks to all screen protectors, and application is finicky so be prepared to use more than one protector to get it right.

WOW has matte protection come a long way. I was very worried about the rainbow and sparkly effect matte protectors have on screens. I was very surprised to see if this has very minimal of either of these issues. Installation was easy to qualified minutes and I took my time. The instructions could use a little bit more clarity but when you read it two to three times first it becomes clear what you need to do. My installation was flawless, not a speck dust or anything else. The cut of screen glare is spectacular! Tips: SEE MY CRUDE DIAGRAM FOR THE VISUAL OF HOW TO APPLY 1. Make sure your screen is very clean and dust free. 2. Make sure you use the sticky tabs to hold the protector down on 1 side as you will be lifting the other side for installation. Make sure your tabs are parallel to the top edge of the screen. Think along the lines of a door hinge. If your "hinge"is crooked, when you lift it up to apply, it will be off angle. 3. Peel off the under layer ( this will static cling stick to your hand! I had to shake it off as my other hand was holding up the protector). While you are holding up the far end of the protector, slowly lower it like a bent page of a book while working the squeegee from the side where you applied the tabs. If you get a bubble, just lift the protector just enough to wear the bubble is and then work the squeegee across again. 4. Peel off the protective top layer and you are done! No more 15 min screen sleeping sessions !!!! Mac screens with the anti-reflective coating are major pains to clean. Why I did not do this sooner it's beyond me.

I ordered this for my Thinkpad X1 Yoga Gen 6 as it seemed like a really good option. It was not. You absolutely needed to remove the screen before closing the laptop because the top magnets would magnetize to the keyboard side and come off of the screen, even with the stickers on the bottom. This didn't work for me as I didn't want to take it off every time I closed the laptop. I contacted their support through Amazon's chat feature, and they got back to me asking if I would like to try the 16:10 non-magnetic privacy screen they offer with just the normal clear adherence strips. I said yes and they were kind enough to send me that right away. I have since put that one on, and it works perfectly and stays on the screen wonderfully. The 5-star review is really for the second screen and their customer support. Very good experience.

This is a horrible product and I should have looked at the negative comments before purchasing. These 1 star comments should be highlighted because I now feel stuck with this product with no way to make it better unless taking it back to the Apple Store to help remove the screens. Two major problems with this product: 1) The installation is impossible. The installation instruction contains many broken English that doesn't even make sense. The film provided with the screen are highly sticky; the screen itself is heavier that it won't stay up with just the tiny stickers provided, which means I have to use one hand to hold up the screen, the other hand to peal the inside layer of the film, which then keep trying to stick it back to the laptop. By the time I "fight off" the very static film, the actual screen protector snap right onto my laptop screen, with bubbles, and there is no way to remove the bubbles even the instruction indicated otherwise. Even if I no longer want to use this product, I don't even know how to remove the screen unless I take it to the Apple Store. 2) The protector itself is not a clear screen protector. I now see grains when looking at the laptop screen rather than the super high resolution quality from Apple's Liquid Retina XDR. This is the kind of moments where I will learn my lesson and purchase these types of products directly at the Apple Store to ensure it's done correctly and satisfactory.

two reflective and has a very low privacy level (very wide viewing angle)

I have 3 devices so I decided to order from this supplier - good price! The product is very nice as what we need 👍 but I have received only 2 pcs 😩 instead of 3 pcs as indicated in the description. 🥲

Facil de instalar, a tela realmente fica mais confortavel e protege contra acessos indesejados.

Le quedó muy bien a la pantalla de mi PC, es mate como se indica, trae aditamentos e instrucciones para que puedas instalarlo sin inconvenientes.

Good quality. My eyes don't hurt as much now when I'm on my laptop. 3 pieces so cut one into pieces for my phone. A little tricky to apply but doable. Very important to clean screen perfect before application.