Bike Frame Protection Tape 4x72'' w/Tool - Art Deco

I can’t speak to longevity yet because I only got it installed today, but I love the way it looks, and how much of the bike it covers. Way more than my $85 factory wraps. It took me a while to get it installed because I wanted it to look perfect. The cutting and dry fitting took the longest by far. The actual installation was a breeze. The design looks great and it is subtle in certain areas where the color fades to a dark purple. I like the effect. Just follow the video and you won’t be disappointed. It gave new life to a fading and peeling old wrap.

This was super easy to apply and the vinyl is a thicker vinyl. Bike looks great and I have intact ridden it and the protection factor is working.

Overall 4.5 stars.Quality of the materials 5 starsThe reason for a 1 star deduction is:1. The squeegee is tiny and you will need a larger one.2. There’s not enough material in one roll to do the top tube, down tube and rear triangles let alone seat post or anything else.This is a very thick material and much more heavy duty than I expected. This stuff is bb proof. Installation is tedious and you need to have patience and experience with applying vinyl will be a huge bonus. Over all I’m happy with how well it applied with my bike. The black topo looks incredibly good and subtle on my already matte dark grey “magic bolt” black frame. I had to order a second roll to finish my rear triangles and seat post. Otherwise it’s a great product. I highly suggest you have good lighting in the area you are going to apply. I did not and discovered some air bubbles I couldn’t see until it was done.

This is a genuine frame protection tape, it's THICK! This is a PREMIUM product and expect to take your time. Not the easiest at first, but good things come to those with patience. Clean your frame, use soapy water on your fingers to handle it. Personally, I apply this dry, as long as you don't stick it really hard to start, it's very forgiving to lift up and reposition. Using the application spray will give you more room for error if you're new to this kind of product. Heat is your friend, hair dryer or heat gun, start on the center of one end, heat a small section at a time and press toward the edge. Go slow, be careful and you'll love the outcome. I rebuild kids bikes and I've been using this on all my builds and absolutely love it.

It's never coming off. This stuff once it sticks it is on there. I don't think I could remove it. I repainted my old bike and wanted to add a little something to make it less boring. This did the trick it is exactly what I wanted for my mountain bike.This stuff is Thick! It will keep your frame from getting scuffed up but I don't know how I would take it off if I wanted too.Cutting it is easy the application takes time but over all is easy to do. I don't have any noticable bubbles. It's great.

Cool in theory, but extremely difficult to install. I did my research, watched the videos, did everything as directed, took my time and still had air bubbles that will not come out. Even with their pro tips.Also would be nice if the stencil was already cut out. Finished product looks ok from a distance but kinda crappy up close. I'll wait a while before doing other parts of the bike.

This wrap offers better protection compared to competitors like RideWrap. I've used both and speak from experience. However, there is a trade off. Due to the additional thickness/protection comes the additional challenge of getting this product to lay flat on curved surfaces. So it requires more patience and time to install. IMHO it's worth it, if you are like me and your riding style requires the best protection. For first time install, I recommend getting one of the patterns which easily covers up any air pockets which typically develop from any frame wrap DIY install. This one is more prone to air pockets, again due to stiffness. Any sections where you are heating the wrap up to stretch in order to make it fit flat will likely pull up creating a air pocket, given time. So creating relief cuts along all curve surfaces is the key to getting this to lay flat and stay flat against the frame. Make templates for proper fit before cutting up your wrap.

The ease of use is awful. This is a very hard and very thick plastic, not a pliable plastic rubber-y type film. I’ve put a few frame protectors on, the expensive kind that aren’t available on Amazon and I’d recommend looking into getting one of those instead. Spend a bit more money and save the headache of using this low quality product.Since none of this is precut and it comes with separate templates and they have to be taped onto the plastic and you have to very slowly an patiently work the cutting out with an exacto knife which LITERALLY takes several HOURS to do all of it. The application of it takes a couple hours too and can’t be done without a heat gun and lots of patience. The versatility of being able to fit different types of frames is also really bad.I got the dragon scale design and The roll I got had weird white blemishes in it. It wasn’t paper backing, it’s just poor quality control from the company.

Sticks well, you definitely need heat gun or hair dryer to smooth out and wrap around curves and to finishing off. Almost ppf like material but tougher and thicker. make sure apply it the way like ppf. If you have idea of ppf installation it shouldn't be too hard to do

This is exactly what I was hoping for. It may require some careful time and effort to fit but its worth it. Looks great. Make sure you watch the video before you start trying to fit.

It was delivered the correct item appreciated⭐️⭐️⭐️⭐️⭐️

I ordered the skin and I knew it won’t be easy to apply on my new bike because the skin was designed for mountain bikes and mine is BTWIN Riverside 150 hybrid bike from Decathlon, so I didn’t use the provided stencils, instead I was able to use the two feet long skin to apply on 90% of my bike surfaces. The seller step by step video guide helped me to make the installation manageable, I can’t say it was a piece of cake but with a little patience the result was amazing. My silver color hybrid bike has round contours everywhere, so I decided to use my magic hands and fingers to apply the skin and remove bubbles with little help of the provided squeegee. At the end, the bike turned out a completely new bike as it was delivered from the factory like that. Many thanks to the seller “Amber and Mark” for a quality product.

Excelente producto