Bookshelf Speaker Wall Mount, Pair of Universal Side Clamping Speaker Shelf Wall Mounting Brackets for Large or Small Speakers, 2 Full Motion Mounts, 55 Lbs Capacity, Black (MI-SB37)

I bought these to wall mount my kanto tuk speakers I use with my pc. I wanted to free up room on my desk and these were the perfect solution 👌. Heavy duty and very easy to mount, even comes with all the necessary hardware as well!! The cover slides over the base and provides a clean look. These can swivel side to side and forward and back as well, very nice feature. The base can adjust quite wide and provides a nice tight fit so ur speakers will stay put. They even have holes that u can use to screw them to your speakers and included screws for doing so. I didn't want to drill holes in my expensive speakers so I just tightened the clamps and they are very snug and not going anywhere, these are very easy to adjust. Overall, I really like these mounts and would reccomend them to anyone looking for a very reasonably priced speaker wall mounts.

I bought these mounts for use with some small Polk bookshelf speakers. The mounts themselves are extremely well made and sturdy, I have no doubt that they'll hold the weight they claim. They were easy to mount into drywall, and came with all the necessary hardware. It took me about an hour to do the measuring and installation. The included instructions were very clear and easy to read, and the actual mounts themselves are simple to put together. You might want to have another person around to help you, it's handy to have someone else hold the mounts in place while you insert the screws into the wall (but if you're careful you could do it alone). You don't have to screw into your speakers, the mounts themselves have nice padding on the speaker bracket, so they hold speakers in place well. They do give you a bit of angle and side to side adjustment which is nice. I do wish they could angle down a little more (I have mine pretty high up on the wall, it would be nice if I could point them down a bit more). But Mount-It's advertising and product info was accurate so I can't blame them for that. Overall for the money these are great. Very sturdy and I do recommend them if you are looking for simple, clean looking wall mounts that give you some adjustment as to where your speakers are pointed.

I'm happy with these. They hold some small speakers that have a bit of weight to them. They can accommodate even larger than mine, but it is all I need to grab them and keep them up on the wall. I made sure I went into studs when mounting these. So they are not going anywhere and it is a solid install. I get no rattling or buzzing from the speakers that are in them even when I am pounding out some sound. Very nice as far as I'm concerned and deserves a good review.

Overall it's a good idea. The design itself is nice, great that they added noise canceling rubber but like most Chinese made products the QA is lacking. The main support post has two screws that attach the support bar. Both of the stands required extra tightening or the post flopped up and down. Certainly not a big deal. The biggest "gotcha" is the arm clamps. The outer portion that fits against the edge of the speaker is welded crooked. I have a 1/8" crooked gap on both sets. Not a big deal if you plan on using the provided screws to screw into the side of the speaker cabinets but for those like myself that refuse to deface an expensive set of speakers that's kind of disappointing. But all in all for the money it's a nice product. My living room isn't exactly movie theatre friendly. I didn't want to use speaker stands for my rear surround so I made a wood clamp system with lag bolts and also the bracket screws aid in clamping as well. This product really worked out well for this project.

Figured it was high time I upgraded the Front Height Atmos speakers in my theater. Wanted to stay within brand for timbre match and finally decided that a pair of Definitive Technology Studio Monitor 450's was the way to go. But damn, they're big (14x9x12) and pretty heavy (22lbs) to mount on a wall. Stumbled across these and missing some of the (misguided) put reviews, decided to give em a whirl. Wow! Surprised. Really well made. Strong and relatively easy to mount. Wasn't crazy about inserting a retaining screw into speaker base, but... Not only holds speakers securely but pivot mechanism allows for precise speaker alignment position, even with fronts pointed down! Was little worried about visions causing mount to loosen (have four truly monstrous subs in room) but nope, no effect at all. Big recommend! Great product!

I mounted 17# speakers on these brackets. It was a tough install. The worst of it was setting the speakers into the brackets, getting them centered, all while holding on to the speaker. I thought that I would be able to manage and let the speaker sit unmanaged while adjusting the bracket. WRONG! My new 17 pound Polk S20 slid off hitting me in the face. No damage to the speaker. I caught it. After getting it centered post mishap, while holding the speaker, I ran a screw through the bottom hole of the bracket, then another through the opposite hole into my speaker. No worries. The install is wonderful and should last as long as I need them. The tilt and angle adjustments are spot on and directed the sound on my rear surround perfectly. I definitely would buy these again when I bump up my game to 9.2 surround one of these days. I really did not like running screws through the bottom of my speaker cabinets. I have never, ever done this and if there were anyway to have placed these speakers on stands on the floor, I would have done that instead. I have an asymmetrical room and the only choice was this under ceiling install. Just knowing that the speakers are firmly attached to the racks is peace of mind. No sound compromise occurred, no rattles, superb answer to my rear sound hole problem. Great racks.

Spectacular. Just what I needed to mount my speakers on the wall. Adjustable to fit width of speakers, quite sturdy,(Make sure mount is installed in wall studs), able to tilt up and down, or move sideways. Highly recommend these.

I'm using these wall mounts to hold my Polk ES15 speakers. Assembly and mounting was easy enough. Both mounts took about 30 minutes to put together. They look good. I like the fact they can be adjusted to the correct angle for my listening preference with little effort. I decided not to screw the speakers to the mounts. I think the clamps work well. There's little risk of them falling out.

I mounted my Samsung subwoofer on this- no issues. It comes with 2 speaker stands.

Good quality, strong and sturdy perfect for the job! 100% recommended.

This product is great. Came in a box with individual wrappoing/packaging on each of the items. no scuff marks on the mount. Very simple to install and feel solid. Premium look and feel, I would highly recommend them. Screwed each mount into studs with just the two middle bolt holes of each mount and its very solid! The ability to adjust and angle feels very premium and you can make minor adjustments without any wobbling or wiggling

Gostaria de tudo. Excelente.

Funcionaron perfectamente, colocación sencilla y sujetan las bocinas muy bien, tienen un ligero margen de ángulo vertical que te ayuda a direccionar el sonido hacia el punto que lo requieras y dan buen aspecto en cuanto a sus materiales.