Obokidly Upgrade Type DIY Racing Simulator Steering Wheel Turn Signal Wiper Lever Switch For Logitech G27 G29 G920 G923 Logitech Thrustmaster T300 (Upgrade Type-For G27/G29, Black)

Works well easy to use and install. Had a few issues with setting up but tech support was fast and easy to follow. The pricing was fair and shipping was fast.

I own a Logitech G29 steering wheel combo amd got into American Truck Simulator (ATS). While driving with the stock steering wheel setup was fun and added realism to the game play, there was still the need to reach over to the keyboard or buttons on the steering wheel to activate/deactivate blinkers, wipers, headlights amd to start the truck. I was on Amazon one day looking for ATS accessories (mostly the 18 speed shifter knob) I stumbled across this item. Didn't have many reviews (21 as of this writing 19-Apr-2023) but I liked what it added in features. Found the installation videos on YouTube and took a chance on this. Yes it is 3D printed parts, but the circuit boards and one wire to the computer setup was nicely done. They incorporated the blinkers to deactivate when you return the wheel from a turn to center (the option to turn blinker off automatically needs to be unchecked in ATS). The one grip I have is the placement of the start/stop button (although I can't think of a better place) it's sometime difficult to full like a real truck when going to start the engine. Most start/stop buttons are mounted to the dash in front of the driver, not down under the steering wheel. None of the aftermarket electronics connect to the G29 steering wheel. You just connect an extension wire to the original wire to reach the new placement of the steering wheel. They supply you with a long micro usb to USB-A cable to connect the new "joystick" to the computer. Have had it on now for about 2 weeks and it has worked flawlessly since install.

Do not buy when I opened the box I started looking at the parts very cheap 3d printed plastic I then noticed on the turn signal that the connection piece was already broken and the pieces weren’t inside the bag so that means it broke at the factory. It does still work, but only right turn signal left does not was missing screws. Luckily I had one of each of the ones I was missing so I could replace them and you lose majority of your feedback on your wheel the retarder switch doesn’t work as should the knob and everything else is one button and whenever I turn on my headlights right turn signals come on too hard to find any videos or instructions to put together comes with one paper that’s in Chinese definitely wouldn’t waste your money I would give it zero stars of Amazon would let me

This product works alright. I’m using it for My Winter Car the starter and retarder will have phantom inputs until I unplug then plug it back in I have to do this every 45 min or so

Purchased for Thrustmaster T248: Everything works as intended. It’s relatively easy to install. However, the bolt won’t fit in part that connects to the steering wheel itself, because the threads are too small.

I cannot believe I've been using American truck simulator and euro truck simulator for 3 months without this. This completely adds a whole new level of immersion to gaming. I'm not gonna lie about the setup though, it was a bit tricky. I've said a few words that I haven't said in a while lol. But this is most definitely worth the trouble of putting together if you are into sim truck gaming like me. The company does provide a manual via AQR code which also contains links to step-by-step videos. That greatly helped. The only thing I don't care for on this whole thing is the push button start. If I tap the gas the truck starts up so that's usually what I use. It is pretty cool though. The greatest thing I dislike about it is the LED light stays on at all times, even when the computers turned off. It's not life shattering tho lol Initially I did have an issue where the retarder and blinker were not working properly. I spent 2 hours fiddling with it and almost gave up. And then out of sheer luck I switched the 2 ribbon cables around for the 2 modules on the control unit and it worked perfect. So, I supposed that's my fault, not following instructions carefully. So if this happens to you, just switch the cables around. They're both the same color and the same connector style so it's easy to switch them around by accident. I did wanna give a shout out to the company for answering back within 30 minutes of me emailing them. They were very prompt and willing to do whatever to help me out. I can't say if this is for you or not, but I will never play American truck simulator or euro truck simulator without this again. The immersion factor it adds is completely worth it to me. 100% recommend.

Worked great and exactly as described. Thanks!

Putting the product was very straight forward, the installation videos of both the hardware and software portions of the product were very informative. Tested it afterwards in ATS and it works really well so far! Definitely a really good upgrade from the Simmagic one I was using. Build quality was surprising really good, both the 3d printed parts and metal. The cover is a pricey addition, but makes it look really slick. Overall a really good product I think everyone should look into if you have other accessories like a button box/shifter etc for further immersion. Only problem I had of which was on me, was I had taken apart the g27 to perform other repairs and had forgotten to put the g27 cover back on after installation of the Okokidly DIY. The major issue I ran into was the set screws to hold the shaft to the steering wheel, and g27 coupler must've warped the shalf slightly during installation that the shaft was a tight fit into the couplers. All that was needed was patience and light tapping from a hammer to get the shalf and coupler back together. Just made sure the holes were lined up since there is now way of separating those pieces now. (Just dont make the stupid mistake I did lmao)

Yes it’s dear in price, but it’s for a select market. My girlfriend bought this for me and it is totally amazing. This unit is packaged amazing, very well made and I couldn’t be happier. I would not hesitate to buy another add-on from this seller. Follow the instructions, use a screwdriver, not an impact and you will have no problems. Absolutely amazing.

La finition est à revoir. Le produit semble fragile : dès qu’on le regarde, on dirait qu’il va se briser tout seul. La qualité n’est pas satisfaisante.

Just got my turn signal setup but I don’t see the shroud cover as stated and shown in the order. All came in that little box. Guess it goes together like a jigsaw puzzle by video only. Have to decide if I want to keep it without the shroud that I paid for. If I do, I will review how it actually is. UPDATE: So I put it all together and turns out despite the shroud cover showing as one bit piece in the product picture, it is made up of 3 individual pieces. Found this out myself. Have yet to plug it in yet and try it, but I am hopeful and optimistic. Others with the same advised me they are a game changer.

Very cool gadget. I absolutely love it, works as advertised and especially great with ats. Very difficult to assemble, instructions are on the guys YouTube channel which is difficult to find, they are not in order. Overall very complicated to build but easy to connect ( to ats at least). It’s 3D printed also which is not cool, not good quality material. The screws often come loose, and thus the wheel wobbles a bit. When I first assembled it the wheel was off-centre and would have a dead zone where the wheel would move but not the base. I fixed it and it’s good now but still. Not impressed with build quality. Next time I want to add to my simulator instead of paying 300$ for this I will just buy an arduino and learn how to code. It’ll be much simpler.

It worked for about 8 minutes and then quit. Won't stay connected to my pc.