REVOTECH PoE to USB C Adapter Converter, Convert POE to Output 5V/2A Type-C with Ethernet, IEEE802.3af with 10/100Mbps, Wired Broadband and PD Charging for Smart Phone/Tablet, Plug and Play (P2C5V)

I grabbed the REVOTECH PoE to USB-C Adapter Converter to simplify powering my MEVO Start Cam, and it works exactly as advertised — no extra power bricks, no adapters, just clean PoE-to-USB-C power and a reliable Ethernet connection. This little converter may look simple, but it packs a punch. It takes standard PoE input (IEEE 802.3af/at) and reliably converts it to a 5V/2A USB-C output, which is exactly what the MEVO Start needs. I plugged it in, connected my PoE switch, and the camera came up instantly and stayed fully powered throughout every shoot. No power drops, no flickering, and no stress. Here’s what impressed me most: •Real PoE to USB-C power — It actually delivers clean, stable 5V/2A power to my MEVO Start cam without needing extra adapters. •Ethernet passthrough — My camera gets network connectivity and power over one cable — super clean setup. •Plug-and-play simplicity — Zero configuration, just connect and go. •Reliable performance — Used this through long livestreams with zero issues. If you’re using a PoE setup and want to power USB-C devices like the MEVO Start Cam without extra power supplies, this adapter is a fantastic, affordable solution. Highly recommended!

Worked great to get POE from a Cat-5 cable to my Mevo camera. It’s been in constant use for several months now with no problems.

Does NOT work with Ring outdoor cam pro 4k. Too thick around the USB C. Otherwise works as it should.

Works well with my seven Logitech Mevo Start cameras. I bought 7 of these and they work very well.

We bought this device to test it out on our iPads. It does slowly charge, but, when we tested whether it could maintain the data connection after a reboot, we found it does not reconnect the data. You have to disconnect the USB-C connector and reconnect it again. This is a critical failure if you plan to use this in an tablet enclosure. It means you're constantly pulling them out of their enclosure. No thanks.

These will power an IPad 2024 and provide ethernet access. 10/100 speed, but for the money its worth it. Super easy to use.

I needed this product to change ethernet poe to USB-C for power to a RING camera. Working great for over a week outside not a harsh environment. Easier to run ethernet cable than usb cable.

It works as advertised. I’m using it to connect a Samsung A9+ tablet to a network via Ethernet and power it continuously. I was worried it would be a cheap device, but it seems solid!

Poder conectar tablet , y portátiles nuevos por red con este adaptador.

Great. Thanks

Cette prise compatible PoE permet de charger min iPad et lui fournir internet directement depuis un réseau compatible. Dommage que celui-ci soit limité à 100mbps.

Seems to work well, provides power and Ethernet to Samsung tablet Galaxy Tab A7 Lite, I turned off the wi-fi on the tablet to make sure was using the Ethernet and works well, the adapter does get fairly hot when charging, not sure if that's ok or not, I guess will see after a while of use as we are stetting these up as kiosk's so will be plugged in all the time, once the battery is full the adapter isn't as hot, so that is good, I can unplug it and plug back in and seems to work fine and still charges and provides data no problems even with Wi-Fi off which is great and reliable, time will tell, if didn't get so hot I'd give it 5stars, just seems a bit unsafe, but maybe its ok, if its still working after few months and not melted i'll come back and adjust the review, we have it powered via a unifi USW Pro 48 PoE++ 600w network switch witch can provide 44to57v 64w per port

ok