Alpinetech 16.55" 2 Holes Spoiler Light LED 3rd Brake Light

Perfect fit on my son's car. Easy install! Splice the wires with the old connector and good to go. Its water tight oem quality.

The light fit and works well thank you

This fit perfectly on my 2002 Toyota Camry SE! Almost the same as the OEM part. The end of the wire doesn’t come with a port so I used the old port and twisted the red and black wires together. Fishing the wire through the spoiler into the trunk was a challenge, but I used the old wire to feed the new wire through. Comes with 2 round red caps to cover the screws. I used Q-tips and a glue gun to remove the old caps.

Looks nice on my car

A mi me resultó buen producto, mi auto lo uso mucho en ciudad y la barra tiene mucho tiempo encendida, y asta ahora a funcionado bien, solo que tube que acer una modificación para que ensamblada bien en el aleron.

Fit 2018 Nissan maxima

The spoiler brake light bar was down to about 5 bulbs working and needed replaced bad. This was an after market spoiler and I figured no way would I ever find a replacement. After measuring it and comparing bought it and it fit perfect. Nice and bright again ! So glad this works and so ez to install.

Toyota wants ~$260 for an OEM light (part # 81570-06060). This was worth the gamble. The shape of the light is exactly correct for my 2005 Toyota Sequoia. The original light had 36 LEDs so this is a perfect replacement. Modifications: The screw mounts were too deep for the spoiler. See pics. I used a forstner bit to shave it down but you can use a die grinder, or Dremel or whatever. That cut off the screw hole so I drilled a hole in the plugs for the screw mounts. I used some fender washers to lessen the pressure on those little plugs. Also, there's a little nub where the wire protector comes out the back of the light. The nub wouldn't fit through the wire hole in the spoiler. I took some pliers and carefully broke off the nub and filled the hole with E6000. Silicone or RTV would work just fine as a sealer. Once installed with some solder-shrinks to create a watertight connection for the wires, everything worked great. Based on the OEM part number, this should work for: 2001-2007 Sequoia 1999-2003 Solara Update 7-26-2025 - 8 months later and my gamble didn't pay off. The light is flaky now. I saw it wasn't working when my daughter was driving the other day. I took it out, shook it and tapped on it. The lights would come on and off, but not fixable that I can tell. I may try to buy another and gamble again...

Je suis très satisfait

Tal cual lo describe de muy buena calidad fácil de instalar

Good quality product. Fit perfectly in my 2002 Ford Taurus spoiler mount 3rd brake light and $120 cheaper than other options. Just cut off connector wires close to the old light assembly, feed wires of new assembly through spoiler holes and cut to right length. Connect red wire on light to green/red on connector assembly and red/black on light to black on connector assembly. i soldered and heatshrunk wires together. Plug in connector and put the two small screws through the light and into the spoiler. You need a really short phillips (about 1 3/8" or shorter) to put screws in. There is not a lot of room between light and trunk lid. Put in the screw hole cover pieces. Light works good, nice and bright.

Es exactamente el Producto que publican, el servicio y rapidez de entrega, buen proveedor

This was a perfect fit in my 2012 Sentra, after the original 3rd brake light clips just snapped clean off. As mentioned in another review, you will need to snip the existing connection and crimp/connect the wires as originally connected. One thing to note is the wires on this product are a much thinner gauge than OEM, and are aluminum cladded copper (vs pure copper). The wires are possibly too thin, and you may end up taking more than just the sheathe off when stripping it away. Fortunately, there's a sufficient length to the cable so if that happens you have plenty to work with.