LANMU 2-Pack Pressure Relief Device for Triton,Pressure Relief Device PRD with Disc Seals Cover Valve Shower Spares Parts for Triton Electric Showers(Replace of 82800450)

Very simple to fit for the diy-er; just remember to check compatibility with your shower before buying ( mine was a Triton Ivory 4 shower) AND make sure the power to the shower is off before taking front cover off! Replacement takes literally a couple of minutes. Both the original type PRD and the newer replacement PRD fit and work perfectly. Excellent value for money and seems to be working really well.

Basically “ ronseal “ does what it says on the tin Good quality Good spares extras

Worked well saved me purchasing a new shower

Why did you choose this product over others?: Having spent £200 on engineer visits prior, I was told about these and how easy they are to fit. If you have a shower with water spewing out of the casing, the bottom of it, this is your fix. It's a pressure release valve and designed to pop when pressure builds, but they age and then fail. Very easy, turn off your elecs, take the face panel off your shower and you'll see if by the hose connection in the shower. 2 screws to take the old one off, put this replacement back on. I've done 3 of these and I'm not a DIY'er and I don't do electrics. But very easy! Quality: Work well and fix Pressure Relief Issues Weight: Very light and tiny, few grams Ease of use: Very easy to install and you'll find tutorials online Water flow: Will allow water to flow through your shower again

This pack comes with 4 replacement seals - two already fitted to the valve housings supplied, and two spares, which provides for 4 repairs - the seals just slip onto the valve housings, and I reused my original valve housing. One replacement valve with seal, plus postage, will cost about the same if purchased from Triton, and the last spare part I ordered from Triton took 4 days to arrive. - amazon prime delivered this item the next day. My shower is a Triton T100XR with a black Pressure Relief Device, and this item fits fine - just use the original threaded set screws, not the screws in the pack. For the T100XR: isolate the shower from the power supply, remove three srcews from the case (two at the top, one at the bottom) carefully pull the front of the case forward a few inches and disconnect the multi plug by pulling forward to release the electrical ribbon. With case front off, locate the PRD at bottom left, remove the two small set-screws (quick tip - cover the plughole in the shower tray first, just in case you drop a screw) replace with a new valve and seal, or just replace the seal on your existing valve. Having tightened the two small set screws holding the valve in place, keep your hands out of the way while switching on the power for 30 seconds - cold water will flow from the hose. Isolate the power again and check for leaks. If all OK, replace the case front - to reset: turn the splined control spindle as far right as it will go, and set the outer adjustment knob to minimum flow ( which is the hottest setting - on a clock face around 10 to 12). Reconnect the electrical ribbon, place the case front in position so that it is a good fit, and relpace the three screws. Job done. Before reusing the shower check that there is no restriction in flow, e.g. a kinked or blocked hose, or restricted shower head due to limescale, etc.

After my shower unit sprung a sudden leak i found the pressure relief valve at fault. Ordered the Lanmu 2-pack relief valve. Fitted in minutes tested and the shower up and running. This was a replacement modified valve. Great product.

The item was easy to fit. Excellent service, placed order Sunday evening, arrived Monday afternoon and fitted the next day. So I did not have to replace my existing shower. A real bonus, Thank you.

Installed, but had drip still from the oring seal, it looks like the ones supplied are thinner than standard so won't seal, installed the old thicker Oring and sealed straight away.